HDD GURU FORUMS http://forum.hddguru.com/ |
|
HDD repair 2.0 ENG http://forum.hddguru.com/viewtopic.php?f=7&t=6808 |
Page 1 of 2 |
Author: | cetverooki [ March 9th, 2007, 9:05 ] |
Post subject: | HDD repair 2.0 ENG |
hi to all can someone tell me if this program is for pata drives only. i heave sata drive that this program doesent reckognise at all. if there is a setting for this program to enable sata drive please share it with me. |
Author: | pcimage [ March 10th, 2007, 14:25 ] |
Post subject: | |
Are you running it directly from the SATA port on your mainboard? If so, I think HDD repair only work off IDE. So you will need to run your SATA drive through a IDE>SATA adaptor. Sean |
Author: | rameez [ March 11th, 2007, 3:44 ] |
Post subject: | |
but i think sata drives have different firmware structure then that of ide so i think it will not work on sata drives . |
Author: | hddking [ April 27th, 2007, 4:48 ] |
Post subject: | |
i agree with u mr.sean u r right |
Author: | unknown [ January 1st, 2008, 21:26 ] |
Post subject: | Re: HDD repair 2.0 ENG |
can u give me the (hdd repair 2.0 eng) URL please ? |
Author: | craig6928 [ June 23rd, 2008, 16:20 ] |
Post subject: | Re: HDD repair 2.0 ENG |
its only for ide not sata |
Author: | dick [ June 24th, 2008, 3:00 ] |
Post subject: | Re: HDD repair 2.0 ENG |
Does this programme actually repair anything? |
Author: | rameez [ June 24th, 2008, 13:02 ] |
Post subject: | Re: HDD repair 2.0 ENG |
yes its a good freeware utility for repairing maxtor and WD firmware . |
Author: | craig6928 [ June 26th, 2008, 1:51 ] |
Post subject: | Re: HDD repair 2.0 ENG |
i got this program but not sure where to get the data lead you connect up to use it any ideas cheers |
Author: | N.C. [ June 29th, 2008, 18:41 ] |
Post subject: | Re: HDD repair 2.0 ENG |
Hi, gurus I have one error-free and data-free donor drive, NAR61HA0, and playing with HDD repair 1.1, i have made this to NAR61HAZ. Is there a way, to fix this kind or error with 2.0 version? The drive has ARDENT cpu, but the hdd repair shows only DSP and POKER. Can somebody help me a little? Thanks, Janos |
Author: | rameez [ June 30th, 2008, 9:37 ] |
Post subject: | Re: HDD repair 2.0 ENG |
Ardent = poker . |
Author: | craig6928 [ July 11th, 2008, 3:28 ] |
Post subject: | Re: HDD repair 2.0 ENG |
so can anyone tell me where to get the data lead that you connect up to the test pins on hard drive |
Author: | sempre [ July 15th, 2008, 8:49 ] |
Post subject: | Re: HDD repair 2.0 ENG |
can u give me the (hdd repair 2.0 eng) URL please ? I want to test it! |
Author: | N.C. [ July 26th, 2008, 9:44 ] |
Post subject: | Re: HDD repair 2.0 ENG |
Hello Somebody have a loader for this model? 6E020L0510231, K,G,G,A, B8FEA I have already tryd all the loader i have including the one 6E020L on the files in forum, but no one works for me. Additionally i forget to build own loader for this drive, and now i can't make it alive again... Thank you for all who want to help me, Regards, Janos |
Author: | walroro [ August 26th, 2008, 19:11 ] |
Post subject: | Re: HDD repair 2.0 ENG |
Hi, Someone has a loader, ram, rom, modules everything needed for fixing with HDD repair 2.0 ENG this Maxtor hdd, I think the above has to be extracted with this software and not with pc-3000. model 4d04h2 hda 22a pcba 09a unique P1a code DAK019k0 c2 4d040h22209P1 3902B679 K,G,C,B Poker C.3 CPU ----------------------------------------------------------------------------------------- It is detected in safe mode as: Maxtor ROMULUS F/W DAK03OKZ (should be DAK019K0?) Also, this software gives me a message:Found:8c0 Mods Rodrigo |
Author: | Czerno [ December 17th, 2008, 13:27 ] |
Post subject: | Re: HDD repair 2.0 ENG |
Hi ! I too have a failed 40 Giga Maxtor Diamond Plus 8 (Ardent; NAR61590 K,M,C,A ; 6E040L0510605). Would the free program HDDRepair, as advertised on this thread, rewrite the firmware ? ... I can't find instructions for using the program, or downloading firmware modules (are they built-in ?) - can someone charitable help just a little ? I read the FAQs and many threads, and I do understand people who make a living out of HD repairs cannot give out all their secrets, BUT, I can't afford professional recovery by any means either. I'm all willing to try this software, HDDrepair, on the disk (it's toast anyway). Thank you all and n particular, Maysoft for their patience and dedication. -- Czerno |
Author: | Czerno [ December 17th, 2008, 17:22 ] |
Post subject: | Re: HDD repair 2.0 ENG |
And special thanks to M. Rameez... -- Czerno |
Author: | kwar [ January 3rd, 2009, 19:35 ] |
Post subject: | Re: HDD repair 2.0 ENG |
http://kwar.vndv.com/workshop.html |
Author: | seeprakash [ January 11th, 2009, 10:52 ] |
Post subject: | Re: HDD repair 2.0 ENG |
Hi All, I am in between very similar problem, does any body know how to use this software. Thanks, |
Author: | Iszerda [ May 6th, 2009, 4:36 ] |
Post subject: | Re: HDD repair 2.0 ENG |
Hi all! What is the function of the 'Alloc' botton of this software? I tried to guess it, but I am not sure... Thanks |
Page 1 of 2 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |