Thanks Steve, but no dice
Latest thing I just tried...
Made image of the bad Maxtor, with no ECC reading of bad sectors, and put aside...
Ran HDDregen on the Maxtor, it says it fixed the bad sectors.
Put it into the Snap Server.
Hard drive started reading like mad, like it was booting up, for about 15-20 mins. Then settled down. I'm guessing it was performing some sort of cleanup?
But still will not obtain an IP address, either DHCP via our router, or via a PC with a crossover cable (limited or no connectivity).
Any other ideas guys?
Cheers
Sean
_________________
PC Image Data Recovery
http://www.pcimage.co.ukNew!! HDD-PCB.COM for all your PCB and donor HDD requirements!