HDD GURU FORUMS http://forum.hddguru.com/ |
|
Toshiba HDD Under Construction http://forum.hddguru.com/viewtopic.php?f=9&t=30498 |
Page 1 of 1 |
Author: | einstein9 [ February 4th, 2015, 3:29 ] | ||
Post subject: | Toshiba HDD Under Construction | ||
Never saw this message in toshiba, and really looks funny here but will ID @ the end hehehe anyone saw this before?
|
Author: | pcimage [ February 4th, 2015, 3:45 ] |
Post subject: | Re: Toshiba HDD Under Construction |
Is the pcb original? Does the s/n match the drive label? |
Author: | einstein9 [ February 4th, 2015, 4:01 ] |
Post subject: | Re: Toshiba HDD Under Construction |
pcimage wrote: Is the pcb original? Does the s/n match the drive label? SN match org. pcb Yes... |
Author: | fzabkar [ February 4th, 2015, 4:12 ] |
Post subject: | Re: Toshiba HDD Under Construction |
FWIW, I see one forum post where the drive's owner states that his drive doesn't appear to be spinning. That would suggest a PCB fault. Does the PCB ID the same way on its own? |
Author: | einstein9 [ February 4th, 2015, 4:21 ] |
Post subject: | Re: Toshiba HDD Under Construction |
pcb is fine, spins and works and ID but before the ID am getting this msg temp. then it goes well |
Author: | lcoughey [ February 4th, 2015, 9:50 ] |
Post subject: | Re: Toshiba HDD Under Construction |
I suspect that this is a prgoramming/translation error with PC3K and not an actual message from the hard drive itself. |
Author: | fzabkar [ February 4th, 2015, 13:32 ] |
Post subject: | Re: Toshiba HDD Under Construction |
lcoughey wrote: I suspect that this is a prgoramming/translation error with PC3K and not an actual message from the hard drive itself. No, it's a real error. http://forums.toshiba.com/t5/General-Tr ... d-p/351462 |
Author: | lcoughey [ February 4th, 2015, 13:48 ] |
Post subject: | Re: Toshiba HDD Under Construction |
fzabkar wrote: lcoughey wrote: I suspect that this is a prgoramming/translation error with PC3K and not an actual message from the hard drive itself. No, it's a real error. http://forums.toshiba.com/t5/General-Tr ... d-p/351462 Weird. |
Author: | fzabkar [ February 4th, 2015, 16:26 ] |
Post subject: | Re: Toshiba HDD Under Construction |
I notice that "Franz" states that he "can't even feel the drive spin", so that's why I asked einstein9 if he could reproduce the error with the PCB on its own. ISTM that a reference to construction would suggest that the drive may be repairing damaged firmware, either on the PCB or on the platters. However, I only have a vague idea as to how and where Toshiba drives store their firmware modules. Alternatively, could the drive be thinking that it is in manufacturing mode??? |
Author: | Tomset [ February 4th, 2015, 22:05 ] |
Post subject: | Re: Toshiba HDD Under Construction |
these are of ROM does not work the heads. Code: Offset 0 1 2 3 4 5 6 7 8 9 A B C D E F
00021070 02 07 00 00 4C 00 40 00 F8 01 00 00 EB 74 0B 7F L @ ø ët 00021080 23 61 00 74 00 00 23 61 3F 00 00 00 00 00 00 00 #a t #a? 00021090 00 00 00 00 44 52 49 56 45 20 55 4E 44 45 52 20 DRIVE UNDER 000210A0 43 4F 4E 53 54 52 55 43 54 49 4F 4E 20 20 20 20 CONSTRUCTION 000210B0 20 20 20 20 20 20 20 20 20 20 20 20 FF FF FF FF ÿÿÿÿ |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |