Hello!
This is my first post in this forum. I am from Poland
and I do not speak English good! So please be understanding.
Please do not delete the topic if it is in the wrong section. I really do not know which department to write.
I have a computer:
- MB Gigabyte GA-B250M-D3H rev.1.0/bios v.F6 with Pentium G4560 (s1151), 8GB DDR4 2400 & Intel HD610
- operating system Windows 10 Pro x64
- Samsung 960EVO
I have a Hitachi HTS547575A9E384 hard drive.
[ 2.5" SATA2 5400 8M 750GB (formated 680GB), model 5K750-750 ]
I wanted to reduce the capacity from 750GB to 489GB. My disc does not work properly on my satelitte receiver (DVBS2 BOX).
The receiver has the ability to work with 250 and 500GB disks.
Larger disks are not recognized.
Two years ago I had a WDC-WD10EADS (Green Series, 1TB, 7200, 32M, SATA2)
and I used the MHDD program to reduce the capacity. Everything was OK.
No problem, I started the MHDD on the motherboard: ASUS H81MK with SATA2 ports!
Today, the MHDD program (all versions) does not see SATA drives.
All disks are not visible. On the motherboard I only have SATA3 ports. I do not have SATA2 ports. I do not know what to do.
PS. My mother-board boot only with AHCI and UEFI. I do not have IDE mode ...
MHDD: He has problems with: aspidos drivers during boot with Win98-Menu!
Drivers not found, not found, not installed & patch COMMAND.COM not found.
Error 2: Can not save files to drive A
PS2: When will the MHDD version for Windows?
