All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 9 posts ] 
Author Message
 Post subject: Seagate Barracuda 7200.12 FW CC44
PostPosted: April 28th, 2010, 5:44 
Offline

Joined: February 15th, 2009, 6:43
Posts: 27
Location: cuudulieu
Seagate Barracuda 7200.12 stopped working

Hi guys,
Sorry for my bad English!

I have a Seagate Barracuda HDD with the following specifications:
Family: 7200.12
Model: ST3250318AS
Size: 250Gbytes
P/N: 9SL131-300
Firmware: CC44
When I looked in the BIOS model, saw that my Seagate HDD was recognized as 0MB and 0LBA!!

I have tried with china PC 3000; with dku5
but failed

someone please help me?

I use this command with Dku5 , but without success
What is the command line for CC44 7200.12 ?

seagate wrote:

to 7200.11, but 7200.12 ?

On Terminal press CTRL + Z:

F3 T>

F3 T> / 2

F3 2> Z

Spin down complete
Time elapsed msecs 0.147
F3 2>

Wait 5sec and remove the paper separating the Moto phone. Now screw just enough to make a link between PCB and hda (just be calm, relax!).

Then, press CTRL + Z again:

F3 2> U

Spin up Complete
Time elapsed 7.457 seconds (if you get this msg you used good until everything here)
F3 2> / 1

F3 1> N1

F3 1> / T

F3 T> <<<At this step you need to pull cable sata POWER OFF, wait 10sec HDD signal, and then back to POWER. (Not the PCB!).

When done, press CTRL + Z.

F3 T>

F3 T> I4, 1.22

F3 T>

F3 T> M0, 2.2 ,,,,, 22 <<<This command takes a little over a minute to complete!
WR max retries = 00, Max Rd retries = 00, T-Max ECC Level = 14, Max retries = 00C8 certification Rewrite

User format partitions 5% complete, Area 00, Pass 00, LBA 00004339, 00000080 ErrCode, Time elapsed 05 seconds 0 minutes
Users successfully format the partition - 0 minutes 05 seconds time elapsed

F3 T>



someone please help me?

_________________
VERY HAPPY Email WITH ME: khoiphucdulieu@yahoo.com


Top
 Profile  
 
 Post subject: Re: Seagate Barracuda 7200.12 FW CC44
PostPosted: April 28th, 2010, 8:02 
Offline

Joined: March 13th, 2005, 12:33
Posts: 872
Location: Dublin
China PC3000 eh? That's very professional of you :lol:

_________________
Data Recovery Ireland


Top
 Profile  
 
 Post subject: Re: Seagate Barracuda 7200.12 FW CC44
PostPosted: April 28th, 2010, 17:41 
Offline

Joined: June 25th, 2006, 13:51
Posts: 137
Location: Italy
cuudulieu,

where are you (which nation)? I'm in italy.

Maybe I can help you.

Take care

R.

_________________
_________________________________
Servizi di recupero dati hard disk, NAS, Server, SAN, RAID, Pen Drive, CF, SD, microSD


Top
 Profile  
 
 Post subject: Re: Seagate Barracuda 7200.12 FW CC44
PostPosted: April 28th, 2010, 19:53 
Offline
User avatar

Joined: December 16th, 2007, 10:26
Posts: 1151
CK wrote:
China PC3000 eh? That's very professional of you :lol:

this is very old copy version. don't support new drive. don't have update..............

_________________
data recovery service[/b]


Top
 Profile  
 
 Post subject: Re: Seagate Barracuda 7200.12 FW CC44
PostPosted: April 29th, 2010, 1:59 
Offline

Joined: February 15th, 2009, 6:43
Posts: 27
Location: cuudulieu
can not be used DKU5 (7200.11) for 7200.12 FW CC44 . I have tried
-I bought PC300 UDMA ACE subjects , who have contact

_________________
VERY HAPPY Email WITH ME: khoiphucdulieu@yahoo.com


Top
 Profile  
 
 Post subject: Re: Seagate Barracuda 7200.12 FW CC44
PostPosted: May 3rd, 2010, 0:17 
Offline

Joined: February 15th, 2009, 6:43
Posts: 27
Location: cuudulieu
2 / Fimrware 7200.11 ST 3500320NS IBM
I have a hard drive Seagate (from IBM Server)
ST 3500320NS ERRO FIMRWARE

I have tried with dku5
On Terminal press CTRL + Z: not found "F3 T>"
but failed
Image

someone please help me?


Image
DKU5 good, board good. I have successfully hdd 7200.11 STxxxxAS but 7200.11 STxxxxNS failed
Image

_________________
VERY HAPPY Email WITH ME: khoiphucdulieu@yahoo.com


Top
 Profile  
 
 Post subject: Re: Seagate Barracuda 7200.12 FW CC44
PostPosted: May 3rd, 2010, 11:33 
Offline
User avatar

Joined: May 3rd, 2010, 11:29
Posts: 3
Location: Viet Nam
VERY GOOD?????

_________________
Data recovery service in Vietnam
Phone & Zalo: 0888 711775 - 0974 756775
Details:https://cuudulieu24h.com/bang-gia-cuu-du-lieu.html


Top
 Profile  
 
 Post subject: Re: Seagate Barracuda 7200.12 FW CC44
PostPosted: May 10th, 2010, 1:50 
Offline

Joined: February 15th, 2009, 6:43
Posts: 27
Location: cuudulieu
I do not know it, I NEED DATA . Can you help me ?

Y! : khoiphucdulieu

Email: datviet@cuudulieu.com


Image

Image

Image

Image

_________________
VERY HAPPY Email WITH ME: khoiphucdulieu@yahoo.com


Top
 Profile  
 
 Post subject: Re: Seagate Barracuda 7200.12 FW CC44
PostPosted: May 10th, 2010, 2:03 
Offline

Joined: June 25th, 2006, 13:51
Posts: 137
Location: Italy
You are off topic.
This thread is about ST31000528AS with firmware CC34.

Do anybody fixed it?

Thank you
R.

_________________
_________________________________
Servizi di recupero dati hard disk, NAS, Server, SAN, RAID, Pen Drive, CF, SD, microSD


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 9 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: Google Adsense [Bot] and 54 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group