Thanks for appreciate they provide brilliant upgrade i just stunt with this big update..
http://us.mrtlab.com/download/http://www.youtube.com/watch?v=c6qk1AFH9Y4September 20th, 2014
Mrt Pro 140920, version number: 2.0.4.1
- Rewrite Seagate F3 module (beta)
Data Explorer, version: 2.2.0.1
- Modify backward read mode for skipped area
- Fix the fault arises when setting factory program in special cases
- Fix the bug of automatically deleting files after skipping
- Fix the bug “program cannot be exited when clicking Pause immediately after clicking Stop task”
- Remove the option "Run factory program" when creating task
- Add the option “Create partition head map”
- Add the options “Create virtual partition” and “Delete virtual partition”
- Add the option “Automatically create task name”
- Add support for GPT partition
- Optimize parsing and scanning NTFS
- Establish global MFT entries corresponding table, optimize the speed of scanning and parsing
- Add the function of viewing and editing data template
- Add data template in sector editor
- Add right-click menu for sector editor status bar
- Modify the control “file list” to make it consistent with operating habit
- When positioning sector at disk image, there will be a blue border at the sector jumped to, with a character “x” inside marking it. It will not disappear even when mouse entering the border. It is more convenient for viewing.
- Add the function of counting nodes size in file tree, supports NTFS, FAT32 / 16/12, exFAT file systems.
- Count the total size of multiple marked nodes. (When counting marked size, you cannot select root node. Counting folders size in multiple partitions is supported)
- After modification of file tree operation, we adjust the operation of scanning partition accordingly.
- Creation time of recovered file will be the same as the time it was created, not the time when it was recovered.
- Fix the fault that “factory mode cannot be exited after setting task transmission mode”
- Cancel the default checked status of “soft reset” when creating a task
- Optimize the function of counting multiple selected files
- Change the default task name to “Rename” when creating a task
- Fix the fault that “GPT partition can be identified but cannot be expanded”
- Fix the fault that “when another DE task is browsing files, the existed DE task doing file image would crash”
- Allow interface operation when scanning file system and marking valid data of partition
- Unify the operation of marking valid data and scanning partition. They both can be done only when partition expanded
- Optimize LBA conversion interface and operation to make it more convenient to operate
- Support task name with a maximum length of 128 characters
- Fix the fault that “Root node cannot be expanded after scan terminated”
Rewrite Seagate F3 utility, version: 2.0.0.1
- Add P-List translator
- For some of HDD families, support to get module list when ATA is not ready. Support by serial port method to read and write module
- Add reading and writing system file . 12 generation and above, it supports ATA method, serial port method, ABA method to read and write. 11 generation, it supports ABA method to read and write system file
- Changing ROM Tools, it can edit CAP, SAP, RAP.
- It supports to back up module CP ROM tracks files to database, and read from data function
- Support back up ROM by serial port method. Support back up ROM by system files method
- New method of getting tracks list
- Revise reading and writing bug (The problem of reading and writing cache is too smal of some HDDs)
- Add scan and repair of tracks. Add scan and repair of ABA
- Provide more detail report of reading and writing tracks error. (It can reports the reading and writing error in a specific sector of tracks and if it is searching tracks error or sectors error)
- Add quick clear password function
- 12 generation and above, it supports to create LDR and write LDR by ATA method, by serial port method and by ABA method.
- 11 generation, it supports to create LDR and write LDR by by ABA method. It also support to create LDR from tracks
- Read and write tracks by ABA method. It can handle cross-track and heads problem
- It supports to get system files list by ATA method and serial port method
- Add test mode. It can repair some problems
- View password
- Add a subdirectory to the default directory folder based on the previous one. Named for the family member ID.
- Add automatically identify new family buttons in family selection dialog. When it is in the normal mode, it gets family name by ATA. When it is in the terminal mode, it gets family name by termianl
- Add one click to clear the password button. It supports some of HDD families.
- Add database function
- When you power on, it sets the terminal baud rate to 38400 automatically.
- Fix common terminal commands bug
- Fix P-List editing buf. Add deleting the specified type entries function. Support Deleting multi-selection
- Fix ROM tools bug
- Click ABA method to read and write system files, it will enter serial binary mode automatically.
- Exit serial binary mode will also remove the selection of ABA method to read and write system file
- Add writing ATA instructions directly when Write LDR. (Using this function when HDD is ready)
- Add repair Init Smart Fail function
- Add repair MCMT function
- Optimize some details
Hitachi ARM, Version: 2.0.2.0
- Modify toolbar icon of main interface
- Revise the decrypting function. Add the function of backing up ROM, which only supports decrypting of HDDs with 3 heads or more by now.
- Fix the bug that prompt in function button on main interface
Hitachi IBM, version: 2.1.0.0
- Revise the function of shielding heads (supports all notebook hard drives of new series with SATA interface)
- Revise the function of redefining master head mannually
- Revise the function of generating Zone
- Add NV-RAM viewing panel. Fix the bug of loading NV-RAM from database error. Modify the button icon of selecting data source on NV-RAM viewing panel
- Add the function of clearing defects translator
- Add the shortcut menu of viewing modules list
- Add the function of translator regeneration
- Revise the function of clearing P-List and G-List, transforming G-List to P-List
- Revise the funciton of writing back modules in batch. Fix the bug of incorrect message on selection panel of writing back modules
- Revise the function of SA structure test
- Modify the toolbar icon of main interface
- Fix the bug that prompt in function button on main interface
Toshiba, version 2.0.3.0
- Revise G-List editor for Toshiba series HDDs. It supports G-List viewing, editing and writing back.
- Revise the function of transforming G-List to P-List for Toshiba series HDDs
- Modify the toolbar icon of main interface
- Revise the family selection panel. Add power control button and re-identify HDD button
- Fixed the bug of power lights
- Optimization of Smart function, combined the strong removal of Smart function
Western Digital, Version: 2.2.2.9
- Add loading support of 5C module
- Add creating LDR. Add one click load LDR function
- Add supporting new families:Giant,Kojn_Re,Trailxls,Diablo 3S
- Optmiize search function. Improve search length. Revise positioning wrong place when searching to the same module address
- Add to support ROM Head bitmap editing of new HDD
- Optimize test mode. Slove defects address problem and cumulative number problem. Add new loading LDR method
- Revise loading LDR log error
- Revise the problem of searching head 1 is not completely
Samsung, version: 1.0.1.0
- Add loading resources function
- Add defect list editing function. It can add S, A, D, T lists to translator to edit
- Add A list to S list, and S list log report
- Optimize clearing SMART function. Slove the problem of clearing SMART not completely
- Slove the problem of not supporting some HDDs to write ROM
- Revise editing defect list. Slove the problem of LBA type of files can not be added
Good Luck and Enjoy