Main » Forums home » Research and development

All times are UTC - 5 hours [ DST ]

Forum rules


Please do not post questions about data recovery cases here (use this forum instead). This forum is for topics on finding new ways to recover data. Accessing firmware, writing programs, reading bits off the platter, recovering data from dust...



Post new topic Reply to topic  Page 5 of 5
  [ 96 posts ]  Go to page Previous  1, 2, 3, 4, 5
  Previous topic | Next topic 
Author Message
HaQue
 Post subject: Re: Marvell 88i6745n JTAG
PostPosted: May 7th, 2015, 11:06 
Offline
User avatar

Joined: December 4th, 2012, 1:35
Posts: 3704
Location: Adelaide, Australia
Doomer wrote:
_dex_ wrote:
"Tiny Console" is activated!
Connect resistor 4k7 to P1 test point (+3.3v) and E6 test point.

So you made "5" (or maybe it was 0x1C00A84E)
If you make it "3" you'll get X-Modem
Great work


I am looking at some similar stuff, but on SSD. I believe the great Dex isn't with us anymore, which is sad.
I wonder if anyone can tell me... how does one come to the conclusion that a 4k7 resistor would need to be across there?

Is it some kind of knowledge of other systems that this is the case?
a guess?
something points to it in the firmware disassembly?
access to a manual?
access to inside info or another hacker?

I can fully se someone figuring out the JTAG pads, but this seems like not something that is accidently happened apon.
Top
 Profile  
 
NuttyProfessor
 Post subject: Re: Marvell 88i6745n JTAG
PostPosted: May 7th, 2015, 17:31 
Offline

Joined: April 28th, 2015, 9:15
Posts: 5
Location: United States
Post clear image(s) of the SSD board.
Top
 Profile  
 
HaQue
 Post subject: Re: Marvell 88i6745n JTAG
PostPosted: May 7th, 2015, 18:35 
Offline
User avatar

Joined: December 4th, 2012, 1:35
Posts: 3704
Location: Adelaide, Australia
Samsung MZ-7PD128M

Attachment:
MZ-7PD128M-1.jpg
MZ-7PD128M-1.jpg [ 955.54 KiB | Viewed 22419 times ]

Attachment:
MZ-7PD128M-2.jpg
MZ-7PD128M-2.jpg [ 736.57 KiB | Viewed 22419 times ]


Top
 Profile  
 
HaQue
 Post subject: Re: Marvell 88i6745n JTAG
PostPosted: May 7th, 2015, 21:19 
Offline
User avatar

Joined: December 4th, 2012, 1:35
Posts: 3704
Location: Adelaide, Australia
I would like to keep the post a couple back where I quoted Doomer and _dex_, but I would rather keep this thread true to _dex_'s content and I will start another thread for each of the SSDs I am looking at.

I don't want _dex_ and Doomer's work to be buried in a long meandering off topic thread.

If a Moderator wants to delete the above post with 2 pictures(or not) is fine by me. I will only post here again if it is very on topic.
Top
 Profile  
 
NuttyProfessor
 Post subject: Re: Marvell 88i6745n JTAG
PostPosted: May 11th, 2015, 17:35 
Offline

Joined: April 28th, 2015, 9:15
Posts: 5
Location: United States
I'm certainly not the expert, but those seven plated wholes are pretty suspect.
Assuming just a two sided board it looks like at least six of them have traces.
Could be jTAG, and, or, serial there.

Meter them out. See if some have the typical 3.3 or 1.8v logic levels.
Top
 Profile  
 
freebird2992
 Post subject: Re: Marvell 88i6745n JTAG
PostPosted: February 27th, 2016, 5:58 
Offline

Joined: September 29th, 2014, 18:43
Posts: 10
Location: china
Hi , i want make friend with you ! my QQ:1186046994
Top
 Profile  
 
jermy
 Post subject: Re: Marvell 88i6745n JTAG
PostPosted: February 27th, 2016, 14:00 
Offline

Joined: March 19th, 2015, 15:01
Posts: 1411
Location: isreal
freebird2992 wrote:
Hi , i want make friend with you ! my QQ:1186046994

friend with who ?
if you mean the OP ?!
the OP don't have the ability to use QQ anymore :( (read page 4)
Top
 Profile  
 
einstein9
 Post subject: Re: Marvell 88i6745n JTAG
PostPosted: June 8th, 2019, 11:37 
Offline
User avatar

Joined: May 13th, 2010, 11:17
Posts: 2703
Location: Kuwait
A better image to the Source Code of Marvell JTAG

R.I.P. dejan....

Its Hard to forget someone like you....


Attachments:
701499_JTAG_pinout - forum.jpg
701499_JTAG_pinout - forum.jpg [ 3.09 MiB | Viewed 17271 times ]

_________________
Kuwait Data Recovery - UNIX GTC
The only reason for time is so that everything doesn't happen at once. By: Albert Einstein
Top
 Profile  
 
einstein9
 Post subject: Re: Marvell 88i6745n JTAG
PostPosted: June 13th, 2019, 5:44 
Offline
User avatar

Joined: May 13th, 2010, 11:17
Posts: 2703
Location: Kuwait
Sean, you asked me and i got the Tool Today.... :wink:

Really appreciate his recommendation


Attachments:
DHL_.jpg
DHL_.jpg [ 1.53 MiB | Viewed 17205 times ]

_________________
Kuwait Data Recovery - UNIX GTC
The only reason for time is so that everything doesn't happen at once. By: Albert Einstein
Top
 Profile  
 
fzabkar
 Post subject: Re: Marvell 88i6745n JTAG
PostPosted: June 15th, 2019, 17:44 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 13102
Location: Australia
einstein9 wrote:
Sean, you asked me and i got the Tool Today.... :wink:

Really appreciate his recommendation

https://www.jtag.com/ru/product/jtag-live-controller/ :wink: :wink: :wink:

_________________
A backup a day keeps DR away.
Top
 Profile  
 
HaQue
 Post subject: Re: Marvell 88i6745n JTAG
PostPosted: June 16th, 2019, 6:13 
Offline
User avatar

Joined: December 4th, 2012, 1:35
Posts: 3704
Location: Adelaide, Australia
195 Euros? to do JTAG? Holy Shit, would want some pretty good features
Top
 Profile  
 
einstein9
 Post subject: Re: Marvell 88i6745n JTAG
PostPosted: June 16th, 2019, 7:42 
Offline
User avatar

Joined: May 13th, 2010, 11:17
Posts: 2703
Location: Kuwait
HaQue wrote:
195 Euros? to do JTAG? Holy Shit, would want some pretty good features


Diff. screw drivers (brands) to do the same job :idea:

_________________
Kuwait Data Recovery - UNIX GTC
The only reason for time is so that everything doesn't happen at once. By: Albert Einstein
Top
 Profile  
 
HaQue
 Post subject: Re: Marvell 88i6745n JTAG
PostPosted: June 16th, 2019, 20:12 
Offline
User avatar

Joined: December 4th, 2012, 1:35
Posts: 3704
Location: Adelaide, Australia
Kia's & Ferrari's... Gotchya! ;-)
Top
 Profile  
 
fzabkar
 Post subject: Re: Marvell 88i6745n JTAG
PostPosted: June 17th, 2019, 3:35 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 13102
Location: Australia
If you're testing the waters, here is a JTAG identification tool (JTAGenum) for US$3, delivered.

JTAGulator vs. JTAGenum, Tools for Identifying JTAG Pins in IoT Devices:
https://www.praetorian.com/blog/jtagulator-vs-jtagenum-tools-for-identifying-jtag-pins-in-iot-devices?edition=2019

Quote:
What are some other differences between the two options?

As far as hardware differences go the JTAGulator has built in level conversion and input protection. This is why I am releasing a shield for the Arduino which provides the exact same capabilities. The open hardware designs for the shield are available here:

https://github.com/dxa4481/inputProtectionShield

_________________
A backup a day keeps DR away.
Top
 Profile  
 
SANJAY
 Post subject: Re: Marvell 88i6745n JTAG
PostPosted: April 6th, 2020, 10:10 
Offline

Joined: July 9th, 2015, 14:11
Posts: 3
Location: india
einstein9, I WANT SOME REVIEW IN THIS POST. TDO SIGNAL IS TOO HIGH ITS 2.70 .OPENOCD NOT GET ID
Top
 Profile  
 
SANJAY
 Post subject: Re: Marvell 88i6745n JTAG
PostPosted: April 6th, 2020, 10:14 
Offline

Joined: July 9th, 2015, 14:11
Posts: 3
Location: india
guru, anyone help me this topic. tdo signal is too high it is 2.7 volt .how to get id .pls help
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 5 of 5
  [ 96 posts ]  Go to page Previous  1, 2, 3, 4, 5

Main » Forums home » Research and development

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 1 guest

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group