View topic - How do you match a new head assembly?

Main » Forums home » PC-3000 support forum

All times are UTC - 5 hours [ DST ]

How do you match a new head assembly?

Page 1 of 1

[ 6 posts ]

Print view

Previous topic | Next topic

Author

Message

olinyer

Post subject: How do you match a new head assembly?

Posted: July 19th, 2016, 11:17

Joined: March 3rd, 2016, 12:51
Posts: 49
Location: Costa Rica

Hi,

I hope you are doing great.

Question:
How do you match a new head assembly?

Thank you for the help.

Best regards,

Top

data-medics

Post subject: Re: How do you match a new head assembly?

Posted: July 19th, 2016, 11:33

Joined: April 3rd, 2011, 0:19
Posts: 2003
Location: Providence, RI

That all depends on the model of hard drive, what brand it is, what family, etc.

Try posting a picture of your drive label, and we can tell you what to match.

_________________
Data Medics - Hard Drive, SSD, and RAID Data Recovery Service Company

Top

olinyer

Post subject: Re: How do you match a new head assembly?

Posted: July 20th, 2016, 15:05

Joined: March 3rd, 2016, 12:51
Posts: 49
Location: Costa Rica

Please find attached the picture.

Brand: WD

Model: WD20NMVW-11AV3S2.

Thank you for the help.

Best regards,

Attachments:

File comment: Attached.

WD20NMVW-11AV3S2.png [ 4.72 MiB | Viewed 7165 times ]

Top

jermy

Post subject: Re: How do you match a new head assembly?

Posted: July 20th, 2016, 15:35

Joined: March 19th, 2015, 15:01
Posts: 1387
Location: isreal

The second drive here will be most likely a match
Matching the HM and preamp rev. Can confirm it
(Btw providing the no. H and HM and preamp rev. Can "maybe" find more cheaper)

this one will be most likely the same FW ver. too (need to check with them) but its a lot of $$$

Top

fzabkar

Post subject: Re: How do you match a new head assembly?

Posted: July 20th, 2016, 16:04

Joined: September 8th, 2009, 18:21
Posts: 15528
Location: Australia

Headstack matching for Western Digital:
http://www.hddoracle.com/viewtopic.php? ... 036&p=4555

_________________
A backup a day keeps DR away.

Top

olinyer

Post subject: Re: How do you match a new head assembly?

Posted: July 25th, 2016, 13:04

Joined: March 3rd, 2016, 12:51
Posts: 49
Location: Costa Rica

Thank you for the help.

Top

Page 1 of 1

[ 6 posts ]

Main » Forums home » PC-3000 support forum

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 26 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum