Hello all,

I've just received in a memory stick using a VFBGA63 chip (NQ280 Micron). I don't think this is eMMC as there is a pretty standard AU processor on the memory stick. I've not seen this type of chip in, and do not have any adapters to try and take a read out. Does anyone?

John

_________________
CDR - Manchester Data Recovery Services
0161 408 4857
http://www.cheadledatarecovery.co.uk/

http://www.ebay.de/itm/U08631-VFBGA63-B ... 1990452089

If you will got adapter you convert it to any other existing device

_________________
Best regards,
Boguslaw Rzepka,
Multi-COM Ltd., Poland

Don't have an adaptor, but I believe this is the pinout...

http://www.macronix.com/Lists/Datasheet ... 20v1.3.pdf

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!

Cheers. Given it's unlikely to ever see on of these chips in again the cost associated with adapter is probably not worthwhile for a one off job. Thanks though for pointing it out and the PDF of specifications.

The customer does have a copy of the data on a failed HDD too. It's Samsung M9 series with heads stuck to the platter. If I have the choice of wiring in to the pins of the BGA or replacing the heads on the HDD... well I think we all know the what we would choose.

I'll make a check with one or two others to see if they hold the adapter in stock.

Thanks,
John

_________________
CDR - Manchester Data Recovery Services
0161 408 4857
http://www.cheadledatarecovery.co.uk/