All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 18 posts ] 
Author Message
 Post subject: Maxtor 6Y080M0 FW+Loader Required
PostPosted: March 16th, 2017, 14:47 
Offline

Joined: March 11th, 2008, 4:35
Posts: 1050
Location: Bangladesh
Got a very old drive in hand.

6Y080M0-YAR511W0

Need FW+Loader

If anyone have this one please share

_________________
__________
There is no substitute for education and experience
THANK YOU
SHAHI
shahi.mahbub@gmail.com


Top
 Profile  
 
 Post subject: Re: Maxtor 6Y080M0 FW+Loader Required
PostPosted: March 16th, 2017, 14:59 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 15463
Location: Australia
Is this OK?


Attachments:
910.zip [606.92 KiB]
Downloaded 420 times

_________________
A backup a day keeps DR away.
Top
 Profile  
 
 Post subject: Re: Maxtor 6Y080M0 FW+Loader Required
PostPosted: March 16th, 2017, 15:05 
Offline

Joined: March 11th, 2008, 4:35
Posts: 1050
Location: Bangladesh
Thanks, but it's incomplete.

Modules are missing, Loaders (Boot.com, boot.ram) are missing as well.

_________________
__________
There is no substitute for education and experience
THANK YOU
SHAHI
shahi.mahbub@gmail.com


Top
 Profile  
 
 Post subject: Re: Maxtor 6Y080M0 FW+Loader Required
PostPosted: March 16th, 2017, 16:05 
Offline

Joined: March 11th, 2008, 4:35
Posts: 1050
Location: Bangladesh
For dealing Maxtor Drive, I've SD Doctor also MRT (MRT could be buggy, I found a Loader but it's not working, most of the functions of MRT Maxtor looks like dead)

It has been several years I worked with Maxtor HDD, yes, in SD Doctor, the loader is Boot.cod and boot.ram...

@spildit, fzabkar shared the resouces from SD Doctor! and things are missing as stated!

By SD Doctor, things are like the following picture


Attachments:
maxtor loaders.png
maxtor loaders.png [ 3.83 KiB | Viewed 12557 times ]

_________________
__________
There is no substitute for education and experience
THANK YOU
SHAHI
shahi.mahbub@gmail.com
Top
 Profile  
 
 Post subject: Re: Maxtor 6Y080M0 FW+Loader Required
PostPosted: March 16th, 2017, 16:20 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 15463
Location: Australia
FWIW, I have 6Y080M0-YAR51HW0.

_________________
A backup a day keeps DR away.


Top
 Profile  
 
 Post subject: Re: Maxtor 6Y080M0 FW+Loader Required
PostPosted: March 16th, 2017, 16:35 
Online

Joined: October 15th, 2012, 13:50
Posts: 45
Location: EUROPE
Hi...


Try this ...(only modules)


Attachments:
Maxtor-Calypso-Maxtor 6Y080M0-YAR511W0.zip [584.23 KiB]
Downloaded 430 times
Top
 Profile  
 
 Post subject: Re: Maxtor 6Y080M0 FW+Loader Required
PostPosted: March 16th, 2017, 16:39 
Online

Joined: October 15th, 2012, 13:50
Posts: 45
Location: EUROPE
Or this....(RAm+modules)


Attachments:
Maxtor-Calypso-Maxtor 6Y080M0-YAR511W0 2.rar [1.09 MiB]
Downloaded 437 times
Top
 Profile  
 
 Post subject: Re: Maxtor 6Y080M0 FW+Loader Required
PostPosted: March 16th, 2017, 16:43 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 15463
Location: Australia
Spildit wrote:
On HRT 3.0 and 5.0 MAXTOR "Loader" it's just the totality of CPs that you send to the drive. There are modules and CPs. CPs can be loaded in reverse as well or you can select what to load.

The "1.GRP" and "7.GRP" files in my first resource consist of CP0 to CP22. I can extract them for you if necessary. (The 2 GRP files are identical, BTW)

_________________
A backup a day keeps DR away.


Top
 Profile  
 
 Post subject: Re: Maxtor 6Y080M0 FW+Loader Required
PostPosted: March 16th, 2017, 16:46 
Offline

Joined: March 11th, 2008, 4:35
Posts: 1050
Location: Bangladesh
@jackass, its not helpful yet until I get loader or boot.cod and. ram
I found some fw in hddsurgery site, but didn't work with mrt. as said, seems the mrt is bugy, and thee hdd with SATA interface by the way

@fzabkar, you can share whatever you have, can try at least

and it would be great if its possible to extract /convert into boot.cod and. ram

_________________
__________
There is no substitute for education and experience
THANK YOU
SHAHI
shahi.mahbub@gmail.com


Top
 Profile  
 
 Post subject: Re: Maxtor 6Y080M0 FW+Loader Required
PostPosted: March 16th, 2017, 17:11 
Offline

Joined: March 11th, 2008, 4:35
Posts: 1050
Location: Bangladesh
The loader I found in hddsurgery in pc3k format, in mrt it can be used as I see it has the function. but it fails, the reason can be either the loader is not compatible or mrt is buggy.
in sd, it gets grp as well which are in total 9 what I can remember. the cp you are referring I see it 22pcs of files. if grp contains the boot n ram. so which numbers? so that can be converted straight by just renaming the extension (not sure. if its gonna work or not)

_________________
__________
There is no substitute for education and experience
THANK YOU
SHAHI
shahi.mahbub@gmail.com


Top
 Profile  
 
 Post subject: Re: Maxtor 6Y080M0 FW+Loader Required
PostPosted: March 16th, 2017, 17:12 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 15463
Location: Australia
Are these of any use?


Attachments:
Y23.zip [2.38 MiB]
Downloaded 427 times
Y22.zip [2.14 MiB]
Downloaded 390 times

_________________
A backup a day keeps DR away.
Top
 Profile  
 
 Post subject: Re: Maxtor 6Y080M0 FW+Loader Required
PostPosted: March 16th, 2017, 17:13 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 15463
Location: Australia
shahij wrote:
The loader I found in hddsurgery in pc3k format, in mrt it can be used as I see it has the function. but it fails, the reason can be either the loader is not compatible or mrt is buggy.

Could we see an example of each loader?

_________________
A backup a day keeps DR away.


Top
 Profile  
 
 Post subject: Re: Maxtor 6Y080M0 FW+Loader Required
PostPosted: March 16th, 2017, 17:22 
Offline

Joined: March 11th, 2008, 4:35
Posts: 1050
Location: Bangladesh
Thanks, hopefully things can be helpful. Will try with SD Doctor tomorrow and update you here

_________________
__________
There is no substitute for education and experience
THANK YOU
SHAHI
shahi.mahbub@gmail.com


Top
 Profile  
 
 Post subject: Re: Maxtor 6Y080M0 FW+Loader Required
PostPosted: March 16th, 2017, 18:37 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 15463
Location: Australia
It looks like the HRT loader prefixes each CP with its size in bytes, plus some minor header stuff. It should be easy to convert between one tool and another.

_________________
A backup a day keeps DR away.


Top
 Profile  
 
 Post subject: Re: Maxtor 6Y080M0 FW+Loader Required
PostPosted: March 16th, 2017, 19:00 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 15463
Location: Australia
Here are the CPs from the "910.zip" resource dump.


Attachments:
CPs.rar [244.84 KiB]
Downloaded 414 times

_________________
A backup a day keeps DR away.
Top
 Profile  
 
 Post subject: Re: Maxtor 6Y080M0 FW+Loader Required
PostPosted: March 16th, 2017, 19:41 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 15463
Location: Australia
The BOOT_nnnn.COD file appears to have the following format (YAR51HW0 example):

Code:
00000 - 001FF  header
00200 - 201FF  CP0x00
20200 - 203FF  CP list (IDs and sizes)
20400 - 243FF  CP0x03
24400 - 283FF  CP0x04
.....
90400 - 943FF  CP0x1F

The "nnnn" characters in the filename correspond to the checksum word at the end of CP00. Each CP also contains this word at byte offset 0x04.

header:

Code:
Offset(h) 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F

00000000  01 00 00 00 00 00 00 00 00 00 02 00 00 00 00 00
                                  ^^^^^^^^^^^
                                  size of CP00 = 0x20000

00000010  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
........
000001F0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

CP list:

Code:
Offset(h) 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F

00020200  01 03 00 00 00 00 00 00 00 40 00 00 00 00 00 00
             ^^                   ^^^^^
             CP ID                size in bytes = 0x4000

00020210  01 04 00 00 00 00 00 00 00 40 00 00 00 00 00 00
00020220  01 05 00 00 00 00 00 00 00 40 00 00 00 00 00 00
........
000203B0  01 1E 00 00 00 00 00 00 00 40 00 00 00 00 00 00
000203C0  01 1F 00 00 00 00 00 00 00 40 00 00 00 00 00 00
000203D0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
000203E0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
000203F0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

end of CP00:

Code:
Offset(h) 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F

000201F0  FF FF FF FF FF FF FF FF FF FF FF FF FF FF CD 6C
                                                    ^^^^^
                                                 checksum

_________________
A backup a day keeps DR away.


Last edited by fzabkar on March 16th, 2017, 19:51, edited 1 time in total.

Top
 Profile  
 
 Post subject: Re: Maxtor 6Y080M0 FW+Loader Required
PostPosted: March 16th, 2017, 19:46 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 15463
Location: Australia
I goofed with CP0x00.bin in my earlier RAR.

Here is the correct one.


Attachments:
CP0x00.rar [70.78 KiB]
Downloaded 222 times

_________________
A backup a day keeps DR away.
Top
 Profile  
 
 Post subject: Re: Maxtor 6Y080M0 FW+Loader Required
PostPosted: March 17th, 2017, 14:31 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 15463
Location: Australia
Attached is a PC3000 loader for the YAR511W0/6Y080M0 drive.

One loader contains CP3 - CP1F, the other includes CPs 3-22.


Attachments:
6Y080M0_YAR511W0_LDR.rar [431.73 KiB]
Downloaded 225 times

_________________
A backup a day keeps DR away.
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 18 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: Google [Bot] and 79 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group