All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 6 posts ] 
Author Message
 Post subject: WD drive isn't responding
PostPosted: August 31st, 2017, 5:11 
Offline

Joined: August 28th, 2017, 3:27
Posts: 16
Location: Manaus
Hello guys! :D

I have WD drive which comes ready after power on but hangs when I'm trying start the Utility.
Can somedody help me?


Top
 Profile  
 
 Post subject: Re: WD drive isn't responding
PostPosted: August 31st, 2017, 11:38 
Offline
User avatar

Joined: December 8th, 2013, 4:48
Posts: 831
Location: Pakistan
what tools you are using ? can take a look remotely if interested

good luck

_________________
Data Recovery Pakistan


Top
 Profile  
 
 Post subject: Re: WD drive isn't responding
PostPosted: September 3rd, 2017, 1:57 
Offline
User avatar

Joined: July 19th, 2017, 2:05
Posts: 109
Location: Dubai
he is using Pc3000 i think as post is in Pc3000 Category ...

_________________
Specialized in Physical Data Recovery

https://lifeguarddatarecovery.com


Top
 Profile  
 
 Post subject: Re: WD drive isn't responding
PostPosted: September 3rd, 2017, 2:00 
Offline
User avatar

Joined: July 19th, 2017, 2:05
Posts: 109
Location: Dubai
hi,
could you give more details about drive & Behavior when you power on .

_________________
Specialized in Physical Data Recovery

https://lifeguarddatarecovery.com


Top
 Profile  
 
 Post subject: Re: WD drive isn't responding
PostPosted: September 4th, 2017, 8:42 
Offline

Joined: November 9th, 2006, 15:15
Posts: 2983
Lylor wrote:
Hello guys! :D

I have WD drive which comes ready after power on but hangs when I'm trying start the Utility.
Can somedody help me?


sounds like common issue relating to device relocation parameters - clear parameters inside module #02 and empty #32 - you may need to force device into a ready state without loading current SA to RAM otherwise you will face BSY error constantly


Top
 Profile  
 
 Post subject: Re: WD drive isn't responding
PostPosted: November 22nd, 2017, 13:38 
Offline

Joined: August 28th, 2017, 3:27
Posts: 16
Location: Manaus
hddguy wrote:
Lylor wrote:
Hello guys! :D

I have WD drive which comes ready after power on but hangs when I'm trying start the Utility.
Can somedody help me?


sounds like common issue relating to device relocation parameters - clear parameters inside module #02 and empty #32 - you may need to force device into a ready state without loading current SA to RAM otherwise you will face BSY error constantly


Already forgot about my question here. Yes, it was like you said. There were problemas with clearing parameters but I managed! thank you


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 21 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group