All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 23 posts ]  Go to page 1, 2  Next
Author Message
 Post subject: How to Fix Data Error (Cyclic Redundancy Check)!
PostPosted: September 7th, 2017, 7:42 
Offline

Joined: September 7th, 2017, 6:58
Posts: 10
Location: london
Hi everyone!
I have a big problem with my Toshiba MQ01ABU032W 2.5" sata hard drive 320Go
more information plz visite : https://www.hdsentinel.com/storageinfo_ ... Q01ABU032W
or : https://toshiba.semicon-storage.com/ap- ... uxxxw.html
the problem is when i'm traing to format my HDD i have the message OF ata Error (Cyclic Redundancy Check)!
What is the problem that you think it might be? Please help!!
Thanks in advance ;)


Attachments:
File comment: This my HDD
2.jpg
2.jpg [ 6.01 KiB | Viewed 1506 times ]
Top
 Profile  
 
 Post subject: Re: How to Fix Data Error (Cyclic Redundancy Check)!
PostPosted: September 8th, 2017, 15:07 
Offline
User avatar

Joined: December 19th, 2006, 8:49
Posts: 8159
Location: Portugal
As you are trying to Format we assume that the data is not important.

So the sollution is very simple ..... Replace the drive (buy a new one)

_________________
1Q9xrDTzTddUXeJAFRn37aqh1Yr6buDCdw - (Bitcoin Donations)
The HDD Oracle - Platform for OPEN research on Data Recovery.


Top
 Profile  
 
 Post subject: Re: How to Fix Data Error (Cyclic Redundancy Check)!
PostPosted: September 9th, 2017, 6:08 
Offline

Joined: September 7th, 2017, 6:58
Posts: 10
Location: london
thanx Spildit, for the answer but i need my HDD and i want fix it


Top
 Profile  
 
 Post subject: Re: How to Fix Data Error (Cyclic Redundancy Check)!
PostPosted: September 9th, 2017, 9:26 
Offline

Joined: September 30th, 2005, 7:33
Posts: 523
Cyclic Redundancy Check error is caused by bad SATA cable or bad connection. Try repluging the SATA cable (on both sides) and changing it with a good one.


Top
 Profile  
 
 Post subject: Re: How to Fix Data Error (Cyclic Redundancy Check)!
PostPosted: September 10th, 2017, 5:20 
Offline

Joined: September 7th, 2017, 6:58
Posts: 10
Location: london
Thanks BGman, For the advice but i changed the SATA cable but i still have the same problem


Top
 Profile  
 
 Post subject: Re: How to Fix Data Error (Cyclic Redundancy Check)!
PostPosted: September 10th, 2017, 6:30 
Offline

Joined: September 30th, 2005, 7:33
Posts: 523
Give us more details about the program you are using, the format you are trying to do, what is the exact message you are receiving.


Top
 Profile  
 
 Post subject: Re: How to Fix Data Error (Cyclic Redundancy Check)!
PostPosted: September 10th, 2017, 9:13 
Offline

Joined: September 7th, 2017, 6:58
Posts: 10
Location: london
okey, i use windows 32 bits to format but when i insialise the HDD whit MBR or GPT i recive the message of Data Error (Cyclic Redundancy Check) this is the picture


Attachments:
122.jpg
122.jpg [ 91.9 KiB | Viewed 1322 times ]
123.PNG
123.PNG [ 226.46 KiB | Viewed 1322 times ]
Top
 Profile  
 
 Post subject: Re: How to Fix Data Error (Cyclic Redundancy Check)!
PostPosted: September 10th, 2017, 9:35 
Offline
User avatar

Joined: December 19th, 2006, 8:49
Posts: 8159
Location: Portugal
Typical problem with bad drives .....

Either drive is completly damaged or have a bunch of bad sectors at start or bad head.

Replace drive with new one.

Also if you want to test your drive get something like MHDD and try a full surface scan. S.M.A.R.T. report will also help ...

http://www.hddoracle.com/viewtopic.php?f=117&t=1393

But most likely you can't repair that MQ ...

_________________
1Q9xrDTzTddUXeJAFRn37aqh1Yr6buDCdw - (Bitcoin Donations)
The HDD Oracle - Platform for OPEN research on Data Recovery.


Top
 Profile  
 
 Post subject: Re: How to Fix Data Error (Cyclic Redundancy Check)!
PostPosted: September 10th, 2017, 15:08 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 9752
Location: Australia
The drive is not being detected properly.

    238.47 gibibytes = 256.055 gigabytes

What does CrystalDiskInfo report?

_________________
A backup a day keeps DR away.


Top
 Profile  
 
 Post subject: Re: How to Fix Data Error (Cyclic Redundancy Check)!
PostPosted: September 13th, 2017, 9:28 
Offline

Joined: September 7th, 2017, 6:58
Posts: 10
Location: london
Hi guys, and thanks for the help , MRs fzabkar, CrystalDiskInfo report givs me inconnu


Top
 Profile  
 
 Post subject: Re: How to Fix Data Error (Cyclic Redundancy Check)!
PostPosted: September 13th, 2017, 18:34 
Offline

Joined: October 16th, 2013, 13:21
Posts: 225
Location: Brazil
Where was this drive being used before ? If it is from a DVR or something, that also would be one of the errors presented when formatting.


Top
 Profile  
 
 Post subject: Re: How to Fix Data Error (Cyclic Redundancy Check)!
PostPosted: September 20th, 2017, 14:02 
Offline

Joined: September 7th, 2017, 6:58
Posts: 10
Location: london
i don't know, may be it was in SERVER


Top
 Profile  
 
 Post subject: Re: How to Fix Data Error (Cyclic Redundancy Check)!
PostPosted: September 20th, 2017, 18:17 
Offline

Joined: October 16th, 2013, 13:21
Posts: 225
Location: Brazil
Maybe ? It is a little hard then, because the drive could be somehow locked , personalized or had some other alteration in firmware done. Not necessarily bad.

One best solution would to take the drive with someone with pc3000 and the knowledge to a correct diagnostic before condemning the drive.


Top
 Profile  
 
 Post subject: Re: How to Fix Data Error (Cyclic Redundancy Check)!
PostPosted: September 20th, 2017, 19:44 
Offline
User avatar

Joined: April 3rd, 2011, 0:19
Posts: 1667
Location: Providence, RI
rogfanther wrote:
Maybe ? It is a little hard then, because the drive could be somehow locked , personalized or had some other alteration in firmware done. Not necessarily bad.

One best solution would to take the drive with someone with pc3000 and the knowledge to a correct diagnostic before condemning the drive.


No one who's spent the money on a PC-3000 system is going to waste time trying to fix a broken drive when there's no data needing to be recovered. It's cheaper and easier to just buy another drive. Even if the OP manages to make the drive work for a bit, it's likely going to just fail again in short time.

_________________
Hard Drive & RAID Data Recovery Services
https://www.data-medics.com/raid-data-recovery/


Top
 Profile  
 
 Post subject: Re: How to Fix Data Error (Cyclic Redundancy Check)!
PostPosted: September 20th, 2017, 20:25 
Offline

Joined: October 16th, 2013, 13:21
Posts: 225
Location: Brazil
data-medics wrote:
rogfanther wrote:
Maybe ? It is a little hard then, because the drive could be somehow locked , personalized or had some other alteration in firmware done. Not necessarily bad.

One best solution would to take the drive with someone with pc3000 and the knowledge to a correct diagnostic before condemning the drive.


No one who's spent the money on a PC-3000 system is going to waste time trying to fix a broken drive when there's no data needing to be recovered. It's cheaper and easier to just buy another drive. Even if the OP manages to make the drive work for a bit, it's likely going to just fail again in short time.


Agreed. My comment for the pc3000 is mostly because the OP seems to not know from where the drive came, and so the reason/cause of the symptoms can´t be correctly assessed, due to lack of adequate tools. Someone with pc3000, or even Sediv, and the necessary knowlege, would be able to say if the drive is defective in some way, or is locked due to belonging to some other kind of machine/dvr/etc.


Top
 Profile  
 
 Post subject: Re: How to Fix Data Error (Cyclic Redundancy Check)!
PostPosted: September 22nd, 2017, 6:01 
Offline

Joined: September 7th, 2017, 6:58
Posts: 10
Location: london
thanks rogfanther, and data-medics, for the help but now what is the solution i don't have pc3000 and i don't know any one for help me can you do it for me PLZ !!!!


Top
 Profile  
 
 Post subject: Re: How to Fix Data Error (Cyclic Redundancy Check)!
PostPosted: September 22nd, 2017, 8:01 
Offline

Joined: September 30th, 2005, 7:33
Posts: 523
xayd wrote:
but now what is the solution !!!!

The solution could come only after good diagnostics and you have done nothing about it. Start with the S.M.A.R.T. data from your drive, for example, than surface scan, etc.


Top
 Profile  
 
 Post subject: Re: How to Fix Data Error (Cyclic Redundancy Check)!
PostPosted: September 22nd, 2017, 8:51 
Offline
User avatar

Joined: February 9th, 2009, 16:13
Posts: 1925
Location: Ontario, Canada
xayd wrote:
thanks rogfanther, and data-medics, for the help but now what is the solution i don't have pc3000 and i don't know any one for help me can you do it for me PLZ !!!!

The cost of our time to us is worth more than the value of your drive...and at the end of the day, we all recognize that it is a waste of time, as the drive cannot be "fixed". It would be cheaper, faster and actually result in your getting a working drive back if we were to simply buy you a new hard drive.

here is a link to buying a replacement on E-Bay - https://www.ebay.com/p/Toshiba-320GB-In ... /194321179

_________________
Luke
RAID Data Recovery


Top
 Profile  
 
 Post subject: Re: How to Fix Data Error (Cyclic Redundancy Check)!
PostPosted: September 22nd, 2017, 10:06 
Offline

Joined: September 7th, 2017, 6:58
Posts: 10
Location: london
thanks BGman, for your help i will do some diagnostics and i will show you what i receved

and for you MRs lcoughey, you too thanks for the advice but i need my HDD and if you don't have any thing to give don't pute yourself in discussion ok bye


Top
 Profile  
 
 Post subject: Re: How to Fix Data Error (Cyclic Redundancy Check)!
PostPosted: September 22nd, 2017, 18:28 
Offline

Joined: October 16th, 2013, 13:21
Posts: 225
Location: Brazil
That picture is too small. Can you provide a better one ?


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 23 posts ]  Go to page 1, 2  Next

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 30 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group