All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 10 posts ] 
Author Message
 Post subject: Toshiba MQ01ABD100H G3461A PCB Dead
PostPosted: January 3rd, 2018, 20:04 
Offline
User avatar

Joined: January 3rd, 2018, 19:07
Posts: 7
Location: Vancouver, WA
Hello,

I have a Toshiba MQ01ABD100H drive that one day was dead no spin nothing will not even detect in the bios... I removed and put in a USB dock nothing no noise etc. Data on the drive is not to important figured I would post here maybe get a place to start to see if it can be salvaged vs. going to the landfill after a visit from the air hammer.

Nothing visually on the board looks burnt, But I am capable of minor smt surgery if required replacing diode, resistors, etc.

Thanks in advance.

Image

Best Photos I Can take at the Moment. Remove the -1024x576.jpg to get to larger image.

Board Image 1
Image

Board Image 2
Image

Flip Side
Image


Top
 Profile  
 
 Post subject: Re: Toshiba MQ01ABD100H G3461A PCB Dead
PostPosted: January 3rd, 2018, 22:01 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 15462
Location: Australia
I would start by measuring the voltages at the fuse and V1-V4.

I would also like to know the markings on each of the chips, if you can make them out. IC617 is of special interest to me.


Attachments:
V3_V4.jpg
V3_V4.jpg [ 209.77 KiB | Viewed 7269 times ]
V1_V2.jpg
V1_V2.jpg [ 132.59 KiB | Viewed 7269 times ]
fuse.jpg
fuse.jpg [ 115.93 KiB | Viewed 7269 times ]

_________________
A backup a day keeps DR away.
Top
 Profile  
 
 Post subject: Re: Toshiba MQ01ABD100H G3461A PCB Dead
PostPosted: January 3rd, 2018, 22:33 
Offline
User avatar

Joined: January 3rd, 2018, 19:07
Posts: 7
Location: Vancouver, WA
Thank For The Reply fzabkar

5V Line is 5V
Fuse is 5V Both Sides

V1 is 2.9
V2 is 2.5

V3 is 1V
V4 is 1.7V


Top
 Profile  
 
 Post subject: Re: Toshiba MQ01ABD100H G3461A PCB Dead
PostPosted: January 3rd, 2018, 23:14 
Offline
User avatar

Joined: January 3rd, 2018, 19:07
Posts: 7
Location: Vancouver, WA
I noticed on the drive where PJ701 connects to the drive that there was oxidization on the pads on the drive.

Gave it some cleaning re assembled it guess what... it spun up and it detected. but no partitions


Top
 Profile  
 
 Post subject: Re: Toshiba MQ01ABD100H G3461A PCB Dead
PostPosted: January 4th, 2018, 3:37 
Offline

Joined: November 29th, 2006, 10:08
Posts: 7843
Location: UK
What device was the drive out of?

A laptop or a USB caddy?

Maybe it’s passworded or encrypted?

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!


Top
 Profile  
 
 Post subject: Re: Toshiba MQ01ABD100H G3461A PCB Dead
PostPosted: January 4th, 2018, 4:02 
Offline
User avatar

Joined: January 3rd, 2018, 19:07
Posts: 7
Location: Vancouver, WA
Was out of a laptop.

It is being detected now quiet no clicking or anything but shows no partition and cannot be partitioned tried all I can just get i/o error trying to initialize it.


Top
 Profile  
 
 Post subject: Re: Toshiba MQ01ABD100H G3461A PCB Dead
PostPosted: January 4th, 2018, 4:25 
Offline

Joined: November 29th, 2006, 10:08
Posts: 7843
Location: UK
Have you still got the laptop?

Did it ask for a password on bootup?

If so then put it back in the laptop and enter the password.

There’s no chance you could have mixed up the PCB for a other one?

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!


Top
 Profile  
 
 Post subject: Re: Toshiba MQ01ABD100H G3461A PCB Dead
PostPosted: January 4th, 2018, 18:05 
Offline
User avatar

Joined: January 3rd, 2018, 19:07
Posts: 7
Location: Vancouver, WA
No password on boot up in the laptop. I will try some other tests that have been recommended.


Top
 Profile  
 
 Post subject: Re: Toshiba MQ01ABD100H G3461A PCB Dead
PostPosted: January 4th, 2018, 19:40 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 15462
Location: Australia
http://forum.acelaboratory.com/viewtopic.php?f=147&t=9175

_________________
A backup a day keeps DR away.


Top
 Profile  
 
 Post subject: Re: Toshiba MQ01ABD100H G3461A PCB Dead
PostPosted: January 5th, 2018, 6:26 
Offline

Joined: March 7th, 2009, 12:43
Posts: 1080
Location: Angel Data Recovery
MQ01ABD100H
It is hybrid drive. Behaivour very similar when problem with NAND. Need to init it using special technical commands via terminal.

_________________
Angel Data Recovery


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 10 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 50 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group