All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 10 posts ] 
Author Message
 Post subject: ST2000DM001's PCB burnt itself
PostPosted: April 19th, 2018, 9:35 
Offline

Joined: December 14th, 2013, 17:10
Posts: 210
Location: istanbul
st2000dm001 9yn164-500 cc4b

I wanted to back up my data. I plugged the power. and this occurs.

I used to identical PCB. Everything is the same except the serial number.( swapping chip already). but it is useless.

Now i lost the flash chip. :?


Attachments:
st2000dm001 9yn164-500 cc4b pcb.jpg
st2000dm001 9yn164-500 cc4b pcb.jpg [ 221.16 KiB | Viewed 6941 times ]
st2000dm001 9yn164-500 cc4b pcb (1).jpg
st2000dm001 9yn164-500 cc4b pcb (1).jpg [ 277.35 KiB | Viewed 6941 times ]
Top
 Profile  
 
 Post subject: Re: ST2000DM001's PCB burnt itself
PostPosted: April 19th, 2018, 9:44 
Offline

Joined: October 16th, 2013, 13:21
Posts: 713
Location: Brazil
If you lost ( don´t know where it is ) the flash chip, then game over. No cheap solution.

If you still have the flash chip, why do you believe it is damaged ? Try reading it in an external programmer.


Top
 Profile  
 
 Post subject: Re: ST2000DM001's PCB burnt itself
PostPosted: April 19th, 2018, 11:43 
Offline

Joined: December 8th, 2010, 11:37
Posts: 738
Location: Ottawa, Canada
I think he's referring to this IC, which is not the BIOS.

Attachment:
ST2000DM001 burnt IC.jpg
ST2000DM001 burnt IC.jpg [ 32.68 KiB | Viewed 6920 times ]

_________________
Sabo Computer Repairs & Data Recovery


Top
 Profile  
 
 Post subject: Re: ST2000DM001's PCB burnt itself
PostPosted: April 19th, 2018, 11:54 
Offline

Joined: December 14th, 2013, 17:10
Posts: 210
Location: istanbul
i know that is not flash chip..

but it needs donor PCB.
identical PCB can't solve problem.

at the end i lost the flash chip at my home.

after all I'm afraid to change seagate PCB.

7200.14 series is a troublemaker.


Top
 Profile  
 
 Post subject: Re: ST2000DM001's PCB burnt itself
PostPosted: April 19th, 2018, 12:00 
Offline

Joined: October 16th, 2013, 13:21
Posts: 713
Location: Brazil
I understand he doesn´t have the chip anymore. If that is so, then no use to keep insisting with this hard disk. He can store it in some place in the case he founds the chip on the floor later.


Top
 Profile  
 
 Post subject: Re: ST2000DM001's PCB burnt itself
PostPosted: April 19th, 2018, 13:56 
Offline

Joined: November 29th, 2006, 10:08
Posts: 7843
Location: UK
Spildit wrote:
Most likely it's NOT his drive and it's a client HDD instead if we take intro consideration the number of posts done by the OP on the last day(s) regarding diferent drives ...

Sad ...


Very sad indeed, for the poor customers :-(

I bet they won’t find out WHY they haven’t got their data back, they’ll be told some pack of lies no doubt :evil:

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!


Top
 Profile  
 
 Post subject: Re: ST2000DM001's PCB burnt itself
PostPosted: April 19th, 2018, 14:31 
Offline

Joined: December 14th, 2013, 17:10
Posts: 210
Location: istanbul
pcimage wrote:
Spildit wrote:
Most likely it's NOT his drive and it's a client HDD instead if we take intro consideration the number of posts done by the OP on the last day(s) regarding diferent drives ...

Sad ...


Very sad indeed, for the poor customers :-(

I bet they won’t find out WHY they haven’t got their data back, they’ll be told some pack of lies no doubt :evil:



Yeah!... clients must f...d by only DR company.

These are my disks. i bought that from wrecker because i need donor drive, at least PCB .
when i recover a disk i got a many oppurtunity.. you know..
Recovered data needs another hdd.

i never harm clients data.. Most of successfully recovered. as you can see below.

https://forum.donanimhaber.com/memberRe ... emID=94826


Last edited by mikail13 on April 19th, 2018, 14:41, edited 1 time in total.

Top
 Profile  
 
 Post subject: Re: ST2000DM001's PCB burnt itself
PostPosted: April 19th, 2018, 14:52 
Offline

Joined: December 14th, 2013, 17:10
Posts: 210
Location: istanbul
Clients sends to me only patient disk.

i send recovered data with another healhty disk.

mass of data needs another hard drive.
it can be shipping another city.


Top
 Profile  
 
 Post subject: Re: ST2000DM001's PCB burnt itself
PostPosted: April 19th, 2018, 15:10 
Offline
User avatar

Joined: January 29th, 2009, 11:23
Posts: 248
Location: SXSW
mikail13 wrote:
Clients sends to me only patient disk.

i send recovered data with another healhty disk.

mass of data needs another hard drive.
it can be shipping another city.


Attachments:
Capture.JPG
Capture.JPG [ 41.27 KiB | Viewed 6872 times ]
Top
 Profile  
 
 Post subject: Re: ST2000DM001's PCB burnt itself
PostPosted: April 19th, 2018, 15:19 
Offline

Joined: December 14th, 2013, 17:10
Posts: 210
Location: istanbul
I'm also e-seller, hdd supplier.

https://www.sanalpazar.com/dukkan/mikail13/d-649249/p-1


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 10 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: Google Adsense [Bot] and 73 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group