All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 45 posts ]  Go to page Previous  1, 2, 3
Author Message
 Post subject: Re: Samsung HM322IX USB interface fail
PostPosted: May 1st, 2018, 20:19 
Offline

Joined: October 16th, 2013, 13:21
Posts: 713
Location: Brazil
At the picture, you can see the pins of the Marvell chip go to the other of the board through some vias.

At the other side of the board, follow the traces and you will see they pass through two pairs of capacitors, then connect to the bridge chips ( the one near the usb connector ) .

You will remove those 4 capacitors, and connect the sata connector wires to the empty pads, at the side that goes to the Marvell chip.

For this one-off job, no need to use other resistors/capacitors in circuit. But keep the wires short and neatly arranged. You can find many other threads here about the same procedure with a discussion about the importance of the cabling.

Connect the usb cable normally, to give power to the disk


Top
 Profile  
 
 Post subject: Re: Samsung HM322IX USB interface fail
PostPosted: May 12th, 2018, 21:16 
Offline

Joined: May 1st, 2018, 19:34
Posts: 3
Location: Uruguay
Hi everyone! I manage to get the data out of the drive!
I were able to solder a usb cable directly to the pcb.

Here a picture of the finished work.

Thank you all for the help!


Attachments:
P1100726.JPG
P1100726.JPG [ 2.1 MiB | Viewed 5939 times ]
Top
 Profile  
 
 Post subject: Re: Samsung HM322IX USB interface fail
PostPosted: May 13th, 2019, 15:08 
Offline
User avatar

Joined: June 16th, 2018, 12:09
Posts: 488
Location: Turkey
Old topic but same case.

Samsung HM502JX/VPK
PCB BF41-00282A (M7S-S Line Rev 01 R10 )

Client says damage occured possibly by water . No water anywhere now. Dried .
Drive working. But spinning and clicking nonstop. I guess head problem.

PCP has different connector Not SATA . But I want to check with MRT before head swap. I don't have SATA donor PCB ( BF41-00249B) according to data medics compatible list .
Also no external bios chip. (Maybe not unique rom chip for this drive. I don't know. Don't have donor PCB yet also)

How do I prepare sata connection . Any pinout info to communicate with MRT.
Attachment:
20190513_181412.jpg
20190513_181412.jpg [ 345.92 KiB | Viewed 3637 times ]

Attachment:
20190513_161847.jpg
20190513_161847.jpg [ 374.88 KiB | Viewed 3637 times ]

Attachment:
20190513_161750.jpg
20190513_161750.jpg [ 385.73 KiB | Viewed 3637 times ]

Attachment:
20190513_161726.jpg
20190513_161726.jpg [ 240.39 KiB | Viewed 3637 times ]


Sound
Attachment:
HM502JX_VPX.rar [2.68 MiB]
Downloaded 318 times

_________________
A Recovery Service In Turkey . Veri Kurtarma Türkiye https://www.digitalverikurtarma.com
Donor Drives hdddonormarket.com


Top
 Profile  
 
 Post subject: Re: Samsung HM322IX USB interface fail
PostPosted: May 13th, 2019, 18:41 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 15461
Location: Australia
Locate the SATA Tx/Rx pairs on the SATA PCB and follow the traces back to their respective pins on the MCU:
https://hddsdatarecovery.com/2527-thickbox_default/samsung-hm320ii-pn-c2131f141a4c9c-bf41-00249b-02-pcb.jpg

Then locate those same MCU pins on the USB PCB, remove the coupling capacitors, etc.

_________________
A backup a day keeps DR away.


Top
 Profile  
 
 Post subject: Re: Samsung HM322IX USB interface fail
PostPosted: May 13th, 2019, 20:42 
Offline
User avatar

Joined: June 16th, 2018, 12:09
Posts: 488
Location: Turkey
fzabkar wrote:
Locate the SATA Tx/Rx pairs on the SATA PCB and follow the traces back to their respective pins on the MCU:
https://hddsdatarecovery.com/2527-thickbox_default/samsung-hm320ii-pn-c2131f141a4c9c-bf41-00249b-02-pcb.jpg

Then locate those same MCU pins on the USB PCB, remove the coupling capacitors, etc.

Thanks. I have decided to do same way. Would try

_________________
A Recovery Service In Turkey . Veri Kurtarma Türkiye https://www.digitalverikurtarma.com
Donor Drives hdddonormarket.com


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 45 posts ]  Go to page Previous  1, 2, 3

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 73 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group