Spildit wrote:
einstein9 wrote:
(...)
Am aware of this, If you mean the Power-up in Standby,, it will not work
I mean somethinmg like this :
viewtopic.php?f=1&t=19107&start=20Will explain it more here to have a better understanding:
I backup resources (full +rom) then plug it to the PC install windows and leave its default setting and Hibernate and then it never spins back by all means.
Then, i read ROM with my programmer and compare it with its Original ITS THE SAME, read all resources n compare it with the original FW (which i took the 1st. time) its the SAME 100%
Moving ROM to new PCB spins normal,,
Tested it with 3 drives and killed ALL OF THEM (MCU)
Now, conclusion here and this is FYI
I have a similar customized App. like the Job Organizer Ref.
http://hddsurgery.com/job-organizer and using it here
we always enter notes about clients drives and always asking what happened before the hdd fails/die or whatever (Indexed & searchable)
and enter it, after some time when you get similar models with similar problems this rings a bell where i verify it myself
but this specific problem i tried with new drives and have at least 5 drives in total and am sure its a PCB Design issue
(Thats why i have many dead/faulty pcb`s to repair
viewtopic.php?f=1&t=36695)
hope this answers your question.