View topic - Seagate Thin SSHD

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Seagate Thin SSHD - Not spinning up

Page 1 of 1

[ 6 posts ]

Previous topic | Next topic

Author

Message

daRecoM

Post subject: Seagate Thin SSHD - Not spinning up

Posted: June 4th, 2018, 21:30

Joined: January 2nd, 2009, 4:18
Posts: 74

Good day,

I've received this HDD from one of our clients
Model: ST500LM000
FW: SM30
PCB NO.: 100731589

I have tried swapped ROM to a donor PCB, without avail

Please advise

Best regards

Attachments:

IMG_20180604_135814.jpg [ 2.34 MiB | Viewed 6848 times ]

IMG_20180604_135734_HDR.jpg [ 4.4 MiB | Viewed 6848 times ]

Top

Tomset

Post subject: Re: Seagate Thin SSHD - Not spinning up

Posted: June 4th, 2018, 22:01

Joined: September 29th, 2005, 4:10
Posts: 402
Location: Moscow

Need log terminal.

Top

lasek

Post subject: Re: Seagate Thin SSHD - Not spinning up

Posted: June 5th, 2018, 2:50

Joined: February 26th, 2016, 5:02
Posts: 81
Location: Poland

When did you change PCB then disk start spinning?

Very popular problem with this disk is damaged nand. Then symptoms is like disk is completely dead without any noise and don't spin.

Top

daRecoM

Post subject: Re: Seagate Thin SSHD - Not spinning up

Posted: June 5th, 2018, 3:16

Joined: January 2nd, 2009, 4:18
Posts: 74

lasek wrote:

When did you change PCB then disk start spinning?

Very popular problem with this disk is damaged nand. Then symptoms is like disk is completely dead without any noise and don't spin.

Hi lasek,
No, it doesn't spin up even we have swapped to donor PCB
Thanks

Top

Masterclass

Post subject: Re: Seagate Thin SSHD - Not spinning up

Posted: June 5th, 2018, 6:57

Joined: May 29th, 2011, 8:47
Posts: 131
Location: Russia

daRecoM wrote:

I have tried swapped ROM to a donor PCB, without avail

Really useless to swap ROM chip on an SSHD drive. If you need data - take it to some skilled engineer

Top

MasterHDD

Post subject: Re: Seagate Thin SSHD - Not spinning up

Posted: June 6th, 2018, 11:27

Joined: May 15th, 2018, 18:46
Posts: 26
Location: Toronto

Agreed with Masterclass. It's best if you do not mess with it yourself if you are not sure what you are doing.

_________________
Yevgeniy. No, NOT Malkin.
Ambassador at ADRS®

Top

Page 1 of 1

[ 6 posts ]

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: Google [Bot], MasterT and 47 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum