Hi
How to ReMap or sheilding bad sectors in MRT Ultra for WD hard drives?

may help this pdf

Make sure before start 9 *All Data Will Erase *

Watch Video for WD Drives provided By MRT

Thanks but I looking for WD drives, It seem this method is only for SeaGate and not works with WD drives.

Hi, you can find the tutorials in below two links:

http://en.mrtlab.com/category/tutorial
http://us.mrtlab.com/tech/


MRT Sales consultant--Pink
Email: sales@mrtlab.com
Skype: live:sales_54921
QQ:3292109557

_________________
MRT Express & Ultra, Professional Data Recovery Tool
Email & Skype: sales@mrtlab.com
Whatsup: +8615827155998

Just give me the link for tutorial , not link of the mrt website! i know mrt website! Or maybe MRT Utra can NOT remap bad sector for WD devices?

_________________
A Beginner in Data Recovery with MRT Ultra

So no one has any real solution for remaping bad sector in WD drives

_________________
A Beginner in Data Recovery with MRT Ultra

What drive model ? How many bad sectors ?

If just a few move G-List to P-List and re-format.

If you have considerable amount of bad sectors run Self-Scan.

You might need to disable heads if one surface (or more) have a huge amount of bad blocks that can't fit the P-List.

_________________
1Q9xrDTzTddUXeJAFRn37aqh1Yr6buDCdw - (Bitcoin Donations)
paypal.me/Spildit - (PayPal Donations)
The HDD Oracle - Platform for OPEN research on Data Recovery.

thanks for your answer

My question is for all WD Drives.

how big is P-list? and how many bad sector it can contain?

_________________
A Beginner in Data Recovery with MRT Ultra

Depends from model to model !!!

Just plug a WD drive to your MRT and open the P-List to check it out ?

_________________
1Q9xrDTzTddUXeJAFRn37aqh1Yr6buDCdw - (Bitcoin Donations)
paypal.me/Spildit - (PayPal Donations)
The HDD Oracle - Platform for OPEN research on Data Recovery.

Hi, please refer to http://us.mrtlab.com/tech/wdc/198.html


MRT Sales Consultant--Pink
Email: sales@mrtlab.com
Skype: live:sales_54921

_________________
MRT Express & Ultra, Professional Data Recovery Tool
Email & Skype: sales@mrtlab.com
Whatsup: +8615827155998

Self-Scan might be a little bit overkill ...

_________________
1Q9xrDTzTddUXeJAFRn37aqh1Yr6buDCdw - (Bitcoin Donations)
paypal.me/Spildit - (PayPal Donations)
The HDD Oracle - Platform for OPEN research on Data Recovery.

yeah, you have to if you want ReMap or sheilding bad sector.
The so-called "All-in-one button " is not rigorous, different HDD has different faults, different cases has different situations.
To experienced and skillful technicans, they always need to make judgement when facing different cases, no matter how powerful tools they use.

_________________
MRT Express & Ultra, Professional Data Recovery Tool
Email & Skype: sales@mrtlab.com
Whatsup: +8615827155998

Or you can disable entire zones if bad blocks are concentrated in a particular area, but this will reduce hdd capacity.
If you have a lot of bad blocks distributed a little bit here and a little bit there on hdd surface, then you might reallocate all those in p-list (it might be necessary to increase p-list size).
Sediv is able to increase p-list size, if is needed it's possible to increase its size by reducing user area space in passport section (example you can choose to reduce 1% of entire hdd capacity).
Waqas Ali made a video tutorial on how to do that, i followed it and worked very good.

Thanks for the info.

_________________
1Q9xrDTzTddUXeJAFRn37aqh1Yr6buDCdw - (Bitcoin Donations)
paypal.me/Spildit - (PayPal Donations)
The HDD Oracle - Platform for OPEN research on Data Recovery.