All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 4 posts ] 
Author Message
 Post subject: MRT SSD Samsung 840
PostPosted: July 8th, 2018, 9:18 
Offline
User avatar

Joined: June 19th, 2018, 4:52
Posts: 45
Location: United Kingdom
I was wondering what actual happens when you read out the memory chips via the MRT tools and the create loader functions.

840 SSD is being detected in MRT but memory error access, boot loader and short allows for dump chip function and I got 8 x 16GB dumped.

Here are my questions:

Does it read the chips via the controller and applies the xor key and strips of encryption during the read.

Also how am I combine those 8 bin files ( I assume they are raid and paired )

There is nothing in the mrt Manuel and whenever I check the dumped bin files I get only FF data in all dumps via RStudio hex editor. Any input would be great


Top
 Profile  
 
 Post subject: Re: MRT SSD Samsung 840
PostPosted: July 8th, 2018, 11:27 
Offline
User avatar

Joined: August 15th, 2006, 3:01
Posts: 3464
Location: CDRLabs @ Chandigarh [ India ]
nicoalbrecht wrote:
I was wondering what actual happens when you read out the memory chips via the MRT tools and the create loader functions.

840 SSD is being detected in MRT but memory error access, boot loader and short allows for dump chip function and I got 8 x 16GB dumped.

Here are my questions:

Does it read the chips via the controller and applies the xor key and strips of encryption during the read.

Also how am I combine those 8 bin files ( I assume they are raid and paired )

There is nothing in the mrt Manuel and whenever I check the dumped bin files I get only FF data in all dumps via RStudio hex editor. Any input would be great


Well,
MRT SSD Support is Experimental Only Solution is Chipoff is few cases and PC 3000 SSD .Supported Models Are Here -> http://blog.acelaboratory.com/pc-3000-s ... dated.html

_________________
Regards
Amarbir S Dhillon , Chandigarh Data Recovery Labs [India]
Logical,Semi Physical And Physical Data Recovery
Website-> http://www.chandigarhdatarecovery.com


Top
 Profile  
 
 Post subject: Re: MRT SSD Samsung 840
PostPosted: July 8th, 2018, 12:17 
Offline

Joined: October 16th, 2013, 13:21
Posts: 713
Location: Brazil
If the dump files are all 0xFF, then MRT couldnĀ“t read from the chips, even it it said so.


Top
 Profile  
 
 Post subject: Re: MRT SSD Samsung 840
PostPosted: July 8th, 2018, 12:23 
Offline
User avatar

Joined: June 19th, 2018, 4:52
Posts: 45
Location: United Kingdom
Well chip off I can do via Rusolut but nand chips are encrypted so no joy here. I need to check tomorrow why it only writes FF in the dumps.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 18 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group