All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 12 posts ] 
Author Message
 Post subject: SEAGATE ST31000524AS - JC4A
PostPosted: October 16th, 2018, 13:10 
Offline
User avatar

Joined: June 17th, 2018, 11:43
Posts: 470
Location: spain
PCB : 100574451 REV B

I have 3 hd of this model and in principle with the same symptom. it hits the head and the engine stops.

It does not give me output per terminal. I have another with another plate model and if it gives me output per terminal.

I could try loading the virtualloader and the loader but I can not find them.

Any ideas. Thank you.

_________________
Is Earth an intelligent being?


Top
 Profile  
 
 Post subject: Re: SEAGATE ST31000524AS - JC4A
PostPosted: October 17th, 2018, 2:20 
Offline

Joined: September 26th, 2016, 4:26
Posts: 110
Location: Russia
This?
https://yadi.sk/d/hm5bt1ZY3ZaeWP/Seagat ... 0_3.5/JC4A


Top
 Profile  
 
 Post subject: Re: SEAGATE ST31000524AS - JC4A
PostPosted: October 17th, 2018, 10:00 
Offline
User avatar

Joined: June 17th, 2018, 11:43
Posts: 470
Location: spain
E123 wrote:


Thanks for the reply.
This is a seagate firmware update.
Can I get the ldr that the mrtlab uses from it?

_________________
Is Earth an intelligent being?


Top
 Profile  
 
 Post subject: Re: SEAGATE ST31000524AS - JC4A
PostPosted: October 17th, 2018, 10:12 
Offline

Joined: December 12th, 2017, 4:27
Posts: 48
Location: Poland, Warsaw
Check PCB first

_________________
Backup is Your best friend. Still learning English. Sorry for language bugs. My websites: Centrum Odzyskiwania Danych


Top
 Profile  
 
 Post subject: Re: SEAGATE ST31000524AS - JC4A
PostPosted: October 17th, 2018, 10:18 
Offline
User avatar

Joined: June 17th, 2018, 11:43
Posts: 470
Location: spain
COD wrote:
Check PCB first


I've thought about it because it does not give a terminal and the engine speeds up a lot.
I have another 2 more broken with the same symptom in principle.
Do you know if the breakage of the PCB is typical of this model?

_________________
Is Earth an intelligent being?


Top
 Profile  
 
 Post subject: Re: SEAGATE ST31000524AS - JC4A
PostPosted: October 17th, 2018, 10:19 
Offline

Joined: September 26th, 2016, 4:26
Posts: 110
Location: Russia
Here is the tool:
https://yadi.sk/d/UD5Kx4eK3WjN2U
Cut off the excess, everything that you think is not necessary. It also can send loader by ATA.


Top
 Profile  
 
 Post subject: Re: SEAGATE ST31000524AS - JC4A
PostPosted: October 17th, 2018, 13:28 
Offline

Joined: December 12th, 2017, 4:27
Posts: 48
Location: Poland, Warsaw
If the PCB will be good the heads neads to be replaced. Typical is bad word in data recovery. I always check simplest solution at start.

_________________
Backup is Your best friend. Still learning English. Sorry for language bugs. My websites: Centrum Odzyskiwania Danych


Top
 Profile  
 
 Post subject: Re: SEAGATE ST31000524AS - JC4A
PostPosted: October 17th, 2018, 15:10 
Offline
User avatar

Joined: June 17th, 2018, 11:43
Posts: 470
Location: spain
Thank you very much for your interest.
I had never seen the LodEdit, I am going to study it and try it and I will comment on the final result (good or bad).

_________________
Is Earth an intelligent being?


Top
 Profile  
 
 Post subject: Re: SEAGATE ST31000524AS - JC4A
PostPosted: October 18th, 2018, 17:54 
Offline
User avatar

Joined: June 17th, 2018, 11:43
Posts: 470
Location: spain
I give up the case.
The three disc has the same symptom, the engine accelerates more than the account, the problem; I put the photo.

The four surfaces are scratched.

Anyway, I'm going to see the theme of this plate model that does not give me a terminal when it's isolated. I will speak with MRTLAB.

If I take something out of the terminal with this model plate I mention it.

Thank you.


Attachments:
IMG_20181018_234550.jpg
IMG_20181018_234550.jpg [ 2.01 MiB | Viewed 7882 times ]

_________________
Is Earth an intelligent being?
Top
 Profile  
 
 Post subject: Re: SEAGATE ST31000524AS - JC4A
PostPosted: October 18th, 2018, 20:18 
Offline

Joined: December 8th, 2010, 11:37
Posts: 738
Location: Ottawa, Canada
With these Seagates, it pays to listen to them before spending much time on them. If you hear scraping noises, they usually have platters that look like yours. Rather than open the drive in a cleanroom environment, I remove just one of the screws that secure the magnets and if it's covered in data dust, it's obviously a goner and would make a hell of a mess of your laminar flow bench.

_________________
Sabo Computer Repairs & Data Recovery


Top
 Profile  
 
 Post subject: Re: SEAGATE ST31000524AS - JC4A
PostPosted: October 18th, 2018, 20:19 
Offline

Joined: December 8th, 2010, 11:37
Posts: 738
Location: Ottawa, Canada
With these Seagates, it pays to listen to them before spending much time on them. If you hear scraping noises, they usually have platters that look like yours. I remove just one of the screws that secure the magnets and if it's covered in data dust, it's obviously a goner.

_________________
Sabo Computer Repairs & Data Recovery


Top
 Profile  
 
 Post subject: Re: SEAGATE ST31000524AS - JC4A
PostPosted: October 19th, 2018, 2:14 
Offline
User avatar

Joined: June 17th, 2018, 11:43
Posts: 470
Location: spain
LarrySabo wrote:
With these Seagates, it pays to listen to them before spending much time on them. If you hear scraping noises, they usually have platters that look like yours. I remove just one of the screws that secure the magnets and if it's covered in data dust, it's obviously a goner.


I'll remember that for next time.
I miss the noise that made, it seemed that the engine was faster than normal, but it seems that the noise was due to friction.

_________________
Is Earth an intelligent being?


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 12 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: drHDD, Google [Bot], Google Adsense [Bot] and 18 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group