I was thinking that @DRUG might be able to make sense of DFL's map file, in which case he could write code specifically for you. AISI, all one would need to do would be to convert DFL's maps to ddrescue's log format, then run ddrutility against the log. BTW, the author of ddrutility is @maximus.

_________________
A backup a day keeps DR away.

Try to compress the map file with something like winrar ....

If the pattern on the file is almost the same for the entire file it will compress nicely ....

_________________
1Q9xrDTzTddUXeJAFRn37aqh1Yr6buDCdw - (Bitcoin Donations)
paypal.me/Spildit - (PayPal Donations)
The HDD Oracle - Platform for OPEN research on Data Recovery.

Here are the only two files that may be useful, as far as I know. I don't know how useful they will be; they boggle my (easily boggled) mind.

_________________
Sabo Computer Repairs & Data Recovery

ISTM that it shouldn't be too difficult to add DFL's skipped sectors to a ddrescue log as bad sectors (-).

excerpt from a ddrescue log


DFL skipped sectors example

_________________
A backup a day keeps DR away.

This is what made me write this code. I kept having drives that had some % of zeroed / blank files (FF,BB,00) and I always like to provide the client with the best information possible about the percentage of files recovered.

I'll pm you soon @LarrySabo.

_________________
BTC Wallet - 3AoQPTBsz9PbfoanCx44Lw76Y2TwtKa1x5

This tool might be useful to those who are limited to RapidSpar. If you don't make the search pattern editable, are you able to add <unreadable> as one of the search pattern options?

_________________
Luke
SSD Data Recovery

@fzabkar

What is DFL default fill on unreadbale sectors? 2E?

_________________
BTC Wallet - 3AoQPTBsz9PbfoanCx44Lw76Y2TwtKa1x5

@DRUG, fill characters for DFL should be 42h according to my results in the Spildit Imager Challenge: "The DDP program writes a sector full of 42h ("B") in place of unreadable sectors." However, the recovery job just competed shows 00h as fill characters, so I'm confused and need to do more research/testing.

_________________
Sabo Computer Repairs & Data Recovery

Can't you just configure DFL to fill the un-readable sectors with a pattern of your choice ?

This is my HRT-DRE (data recovery edition) data extraction / cloning&imaging tool :



You chose the pattern that you want to use to fill the LBA space on the image/clone for the sectors that can't be read and the ones that are skipped from the original drive.

_________________
1Q9xrDTzTddUXeJAFRn37aqh1Yr6buDCdw - (Bitcoin Donations)
paypal.me/Spildit - (PayPal Donations)
The HDD Oracle - Platform for OPEN research on Data Recovery.

None that I can find in the settings.

_________________
Sabo Computer Repairs & Data Recovery

Ok so.

Some bugs* were fixed and:

added suport for DFL default <unreadable>
added support for MRT fill !bad option

bugs*:
0KB files we're not being marked as corrupted.
Maintaining directory structure on corrupted files folder

Still on work:

Displaying file hex content on a box
Creating a Snap2HTML report of the corrupted files (still being considered)

I'm also open to sugestions from users as to other functionalities of this software so please be my guest and ask for it.

_________________
BTC Wallet - 3AoQPTBsz9PbfoanCx44Lw76Y2TwtKa1x5

Actually, I think <unreadable> is the Rapidspar fill pattern, but no matter.

_________________
Sabo Computer Repairs & Data Recovery

You are right, my typo. Fixed

_________________
BTC Wallet - 3AoQPTBsz9PbfoanCx44Lw76Y2TwtKa1x5

So, weekend updates:

Two kinds of operations:

Check for 00 or FF or BB percentage in a group of files

or

Do a string check:

User will input is string in hex and the software will run and marks the ones found with such string.

Working now on a auto-update feature so any changes will be made to all users.

_________________
BTC Wallet - 3AoQPTBsz9PbfoanCx44Lw76Y2TwtKa1x5

Does it scan folders and sub-folders recursively or does the user need to select each folder individually?

_________________
Sabo Computer Repairs & Data Recovery

It does folder and sub-folder scan.

_________________
http://www.pclab.com.pt facebook.com/PCLAB.Assistencia.Tecnica
ACELab partner

Not to put a wrench in this project, it surely is something that is needed. But, wouldn't it be nice if R-TT were to add the ability to search and select files within R-Studio Tech based on cross-referencing file contents with a pattern entered by the user? It kind of sucks that R-Studio already shows a file's condition by cross-referencing the DeepSpar sector map on the clone, yet after a few years of my requesting, still haven't provided any method for using that information to filter the files.

_________________
Luke
SSD Data Recovery

I tried to see if there was any other tool or even Linux command that could do this usefully for hex strings, and I came up short, so this could definitely be a useful tool. Don’t be surprised if I write one for Linux at some point in time, maybe a future pro feature of hddsuperclone

But I would like to point out that if you have some sort of map file that can be converted to ddrescue format, then there is a way to use the pro version of HDDSuperClone along with a Linux licensed copy of R-Studio to know exactly which files have the bad sectors. It involves using the virtual disk feature to present the recovery as a virtual block device to the system, which requires the clone/image and a map file (called a progress log in hddsuperclone, which can be an imported ddrescue map file). You then use R-Studio to extract the files from the virtual disk, which will give I/O errors for the bad files (according to the map) so they can be sorted by R-Studio. But that does require converting whatever map file format the imager created to a ddrescue one. And I don’t plan on adding any other import format into hddsuperclone at this time, so someone would have to either write a converter, or convince me that there would actually be enough demand for me to do it. I just wanted to point out that it could be possible, although not as easy as one would like.

_________________
http://www.sdcomputingservice.com
Home of HDDSuperClone and HDDSuperTool

If you were to search for text strings, would grep be suitable? :?


I've written some simple code to extract the bad sectors from a DFL DE map and convert them to ddrescue format. Would the following map be sufficient for HDDSuperClone to process, or do I need to include the ranges for the good sectors?

_________________
A backup a day keeps DR away.

Sort of, but grep would be looking for that string anywhere in the file. In the event of a bad sector, the pattern would be in 512 byte blocks (typical logical sector size), so you would really only need to check the first part of every 512 byte offset for the pattern, and then if it matches, optionally make sure the whole 512 byte block continues to match the pattern. Only checking on 512 byte boundaries would speed it up. Grep can't do that.


Actually, the good ranges are more important than the bad in this case. The virtual driver will present any area that was not successfully read as an IO error. So the answer is yes, the good ranges would need to be included.

_________________
http://www.sdcomputingservice.com
Home of HDDSuperClone and HDDSuperTool