All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 14 posts ] 
Author Message
 Post subject: Head swap maxtor diamondmax plus 9 80 GB PATA
PostPosted: October 10th, 2018, 15:31 
Offline

Joined: September 14th, 2018, 13:41
Posts: 293
Location: italy
hi guys, today I entered a new case of this disk that emits noises inside, from noise and clicks I think to the head. The disk has the following data plate: code: yar41bw0 n, m, c, d
s.n y325yj0e
6y080l0032013
made in singapore 12 aug 2003
Is it possible to get advice on how to identify a head donor?
I had found this product in September 2003 according to you it is possible to use the heads?


Attachments:
s-l1600.jpg
s-l1600.jpg [ 300.93 KiB | Viewed 11082 times ]
Top
 Profile  
 
 Post subject: Re: Head swap maxtor diamondmax plus 9 80 GB PATA
PostPosted: October 11th, 2018, 4:17 
Offline
User avatar

Joined: November 3rd, 2013, 13:04
Posts: 321
Location: Hungary
Hi!
Do you have more information about your donor?


Top
 Profile  
 
 Post subject: Re: Head swap maxtor diamondmax plus 9 80 GB PATA
PostPosted: October 11th, 2018, 9:45 
Offline

Joined: September 14th, 2018, 13:41
Posts: 293
Location: italy
the donor it's in photo , I have found on ebay


Top
 Profile  
 
 Post subject: Re: Head swap maxtor diamondmax plus 9 80 GB PATA
PostPosted: October 11th, 2018, 14:13 
Offline

Joined: December 5th, 2011, 5:38
Posts: 1626
Location: Italy
Does it produce head clicking sounds or a kind of melody?

Faulty head sound:
https://www.youtube.com/watch?v=pavE77Yussk

Voice coil melody:
https://www.youtube.com/watch?v=JCmLdi3_16I

_________________
My firmware database:
https://mega.nz/folder/O01DkBRI#MxP2J6ZNqXDcrX40I8MoQQ


Top
 Profile  
 
 Post subject: Re: Head swap maxtor diamondmax plus 9 80 GB PATA
PostPosted: October 11th, 2018, 14:50 
Offline

Joined: May 21st, 2007, 16:10
Posts: 1592
Location: Gothenburg/ Sweden
You got info on your other post...reading involved.
viewtopic.php?f=1&t=37390&hilit=swap+heads+on+maxtor

_________________
Rescue IT Datarecovery service Sweden
Rescue IT Dataräddning Göteborg AB
http://www.rescue-it.se


Top
 Profile  
 
 Post subject: Re: Head swap maxtor diamondmax plus 9 80 GB PATA
PostPosted: October 12th, 2018, 1:26 
Offline

Joined: September 14th, 2018, 13:41
Posts: 293
Location: italy
michael chiklis wrote:
Does it produce head clicking sounds or a kind of melody?

Faulty head sound:
https://www.youtube.com/watch?v=pavE77Yussk

Voice coil melody:
https://www.youtube.com/watch?v=JCmLdi3_16I


No melody, click


Top
 Profile  
 
 Post subject: Re: Head swap maxtor diamondmax plus 9 80 GB PATA
PostPosted: October 12th, 2018, 1:46 
Offline

Joined: September 14th, 2018, 13:41
Posts: 293
Location: italy
The real problem is finding an identical unit, I tried on ebay looking at over 200 units image after image. I found only units with 6y08l04 and not 003 it almost seems that Maxtor has only built this one that I have LOL, how do you do in these cases? Do you pray to the god of hard disks? : -}

Spildit wrote:
MAXTOR Hard Drive Match Criteria (for Head Stack Assembly replacement) :

1. Full Model Number. Example: 6H500F0, 4R160L00420P1, 2F040L0

2. Code. Example: RAMB1TU0, VAM51JJ0

3. Four characters (sometimes three). Example: N,F,G,D / N,M,B,B

http://hddguru.com/articles/2006.02.17- ... k-Q-and-A/

Maxtor (all families)
Firmware + Country + Third character in alphabetic code type X, X, X, X should match


Top
 Profile  
 
 Post subject: Re: Head swap maxtor diamondmax plus 9 80 GB PATA
PostPosted: October 12th, 2018, 4:17 
Offline

Joined: September 14th, 2018, 13:41
Posts: 293
Location: italy
guys after so much research I found this hdd, does not have all the same parameters but the model is very similar, according to you can be good? thank you.
Difference : patient have code YAR41BW0 code on donor yar41vw0
letters on patient : nmcd letters on donor : kmcd
sn on patient : y325tjoe sn on donor : y31rvxae
model patient : 6y080l0032013 made in singapore a2 model donor 6y080l0030403 made in singapore c51


Attachments:
s-l1600.jpg
s-l1600.jpg [ 248.57 KiB | Viewed 10897 times ]
Top
 Profile  
 
 Post subject: Re: Head swap maxtor diamondmax plus 9 80 GB PATA
PostPosted: January 7th, 2019, 23:28 
Offline

Joined: January 7th, 2019, 23:23
Posts: 3
Location: 02467
Hi Magnetepazzoo, was your head swap on Maxtor succsessful? I am up for platter-move (stuck rotor) on similar 160gb drive (was sitting for 10 years) and was looking for tips.


Top
 Profile  
 
 Post subject: Re: Head swap maxtor diamondmax plus 9 80 GB PATA
PostPosted: January 8th, 2019, 20:07 
Offline

Joined: January 7th, 2019, 23:23
Posts: 3
Location: 02467
I've done open surgery before, but on single-platter 2.5" IBM drive, not on multi-platter/Maxtor, hence question on any pointers on this drive.
Code: YAR41BW0 N,M,C,D
SN: Y41FQ98E
6Y160P0041201
Yes, I opened it to inspect, and though not in cert. clean room.
I have exact donor (actually 2).

Thanks!


Attachments:
IMG_20190108_183858.jpg
IMG_20190108_183858.jpg [ 192.69 KiB | Viewed 10178 times ]
Top
 Profile  
 
 Post subject: Re: Head swap maxtor diamondmax plus 9 80 GB PATA
PostPosted: January 9th, 2019, 1:23 
Offline

Joined: October 5th, 2015, 18:53
Posts: 478
Location: US
Platter by platter move will not work. You have to unstuck rotor or remove all platters with spindle assembled and put it to donor. It is only possible way as I remember.


Top
 Profile  
 
 Post subject: Re: Head swap maxtor diamondmax plus 9 80 GB PATA
PostPosted: January 9th, 2019, 4:41 
Offline

Joined: November 29th, 2006, 10:08
Posts: 7843
Location: UK
Have had varying levels of success with unsticking motor by force, but it’s worth a shot IMHO.

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!


Top
 Profile  
 
 Post subject: Re: Head swap maxtor diamondmax plus 9 80 GB PATA
PostPosted: January 10th, 2019, 5:31 
Offline

Joined: October 5th, 2015, 18:53
Posts: 478
Location: US
there is a way how to do it platter by platter but you need to know some tricks how to do it. I am not sure if those tricks were in public.


Top
 Profile  
 
 Post subject: Re: Head swap maxtor diamondmax plus 9 80 GB PATA
PostPosted: January 10th, 2019, 9:35 
Offline

Joined: January 7th, 2019, 23:23
Posts: 3
Location: 02467
(Maxtor 6Y160P0041201 with stuck motor)
I was going to use platter-stack compression removal. Rather than buying, can someone borrow/lease compression tool?


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 14 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: Google [Bot] and 79 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group