All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 16 posts ] 
Author Message
 Post subject: About S.A : where is it located ? it's essential ?
PostPosted: February 1st, 2019, 13:40 
Offline

Joined: November 5th, 2018, 8:10
Posts: 43
Location: London
I know that for many it will be a stupid question, but on hard drives with multiple platters :

1- Is the SA located in several platters or in only one?

2- Is it essential to read it in order to boot a hard drive?


Top
 Profile  
 
 Post subject: Re: About S.A : where is it located ? it's essential ?
PostPosted: February 1st, 2019, 13:53 
Offline
User avatar

Joined: September 29th, 2005, 12:02
Posts: 3561
Location: Chicago
usually one platter but both sides
it is essential for a drive to read SA in order to boot

_________________
SAN, NAS, RAID, Server, and HDD Data Recovery.


Top
 Profile  
 
 Post subject: Re: About S.A : where is it located ? it's essential ?
PostPosted: February 1st, 2019, 14:34 
Offline

Joined: November 5th, 2018, 8:10
Posts: 43
Location: London
And you can not crack the firmware so that it does not go to look for the SA?


Top
 Profile  
 
 Post subject: Re: About S.A : where is it located ? it's essential ?
PostPosted: February 1st, 2019, 15:15 
Offline

Joined: November 29th, 2006, 10:08
Posts: 7843
Location: UK
fender wrote:
And you can not crack the firmware so that it does not go to look for the SA?


The firmware IS on the SA (Service Area), well the vast majority of it is. Specifically the useful stuff like defect tables, translator, head tuning adaptives etc....

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!


Top
 Profile  
 
 Post subject: Re: About S.A : where is it located ? it's essential ?
PostPosted: February 1st, 2019, 15:17 
Offline
User avatar

Joined: June 11th, 2013, 17:01
Posts: 1710
Location: Phoenix, AZ USA
fender wrote:
And you can not crack the firmware so that it does not go to look for the SA?

Hmmm. Sounds anti-data recovery.....

_________________
HDD, SSD, Flash and RAID Data Recovery
Founder of The Data Recovery Professionals Group


Top
 Profile  
 
 Post subject: Re: About S.A : where is it located ? it's essential ?
PostPosted: February 1st, 2019, 15:24 
Offline

Joined: November 5th, 2018, 8:10
Posts: 43
Location: London
ddrecovery wrote:
Hmmm. Sounds anti-data recovery.....


jajaj no no, I'm just learning about hard drives, and I wanted to know how indispensable it really is the SA that is on the hard disk platters for a recovery.

Imagine that just the SA has a scratch, Game over?

You can´t avoid it ?


Top
 Profile  
 
 Post subject: Re: About S.A : where is it located ? it's essential ?
PostPosted: February 1st, 2019, 15:28 
Offline
User avatar

Joined: June 11th, 2013, 17:01
Posts: 1710
Location: Phoenix, AZ USA
The SA is stored in at least two places (sometimes 4) on modern drives. Some of the FW is unique to the drives such as the translator and if those unique parts are lost then the drive is toast, but some FW is interchangeable. All depends on what area is corrupt.

_________________
HDD, SSD, Flash and RAID Data Recovery
Founder of The Data Recovery Professionals Group


Top
 Profile  
 
 Post subject: Re: About S.A : where is it located ? it's essential ?
PostPosted: February 3rd, 2019, 14:19 
Offline

Joined: November 5th, 2018, 8:10
Posts: 43
Location: London
Thanks very much for the info. I will read it.


Top
 Profile  
 
 Post subject: Re: About S.A : where is it located ? it's essential ?
PostPosted: February 3rd, 2019, 17:17 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 15461
Location: Australia
newbie info, from and for newbies :) About firmware, SA, etc:
https://forum.hddguru.com/viewtopic.php?f=16&t=6562

_________________
A backup a day keeps DR away.


Top
 Profile  
 
 Post subject: Re: About S.A : where is it located ? it's essential ?
PostPosted: February 4th, 2019, 6:56 
Offline

Joined: November 5th, 2018, 8:10
Posts: 43
Location: London
After reading all the links I still have the doubt of whether reading the information contained in the SA (on the platters) is absolutely essential to read and interpret the data on a hard disk or on the contrary it can be "bypassed" by modifying the firmware of the PCB.

That is, if the sectors of the platter( or platters ) where the S.A is is completely destroyed (headcrash for example) make it necessary to give up.

I also understand that certain brands, such as Toshiba, that have an exclusive firmware for each specific unit, will look for the password in or certain vital information to confirm that this platter belongs from that drive, therefore accessing the S.A would be something vital. But in other models I understand that no ..¿ im right ?


Top
 Profile  
 
 Post subject: Re: About S.A : where is it located ? it's essential ?
PostPosted: February 4th, 2019, 7:43 
Offline

Joined: November 5th, 2018, 8:10
Posts: 43
Location: London
For example SMART and G-list :

Are they completely indispensable and unique to each unit?


Top
 Profile  
 
 Post subject: Re: About S.A : where is it located ? it's essential ?
PostPosted: February 4th, 2019, 10:05 
Offline
User avatar

Joined: April 3rd, 2011, 0:19
Posts: 2003
Location: Providence, RI
fender wrote:
After reading all the links I still have the doubt of whether reading the information contained in the SA (on the platters) is absolutely essential to read and interpret the data on a hard disk

Better go back and read it all again, but this time slow down by a factor of 10 and try to actually understand what you're reading.
fender wrote:
That is, if the sectors of the platter( or platters ) where the S.A is is completely destroyed (headcrash for example) make it necessary to give up.

If the SA is completely destroyed, it's unrecoverable 100% of the time. There's nothing to even bother attempting.

fender wrote:
or on the contrary it can be "bypassed" by modifying the firmware of the PCB.

There's very little firmware on the PCB beyond what it needs to be able to read the SA, where the other 99% of the firmware code is stored. Including all the drive specific adaptives, translation, etc. etc. etc. Rebuilding all of this from scratch would be the equivalent of guessing a 1,000,000 digit long password. It's never going to happen.
fender wrote:
I also understand that certain brands, such as Toshiba, that have an exclusive firmware for each specific unit

No, all modern drives have parts of the firmware that are drive specific. In fact, most drives now have a whole lot of firmware data that is drive specific and most of it (sometimes all) is actually stored in the SA. Toshiba is actually different in the fact that a higher percentage of the drive specific adaptives are stored as configuration pages on the ROM of the PCB instead of the platter SA. So Toshibas are less susceptible to firmware corruption for this reason.

_________________
Data Medics - Hard Drive, SSD, and RAID Data Recovery Service Company


Top
 Profile  
 
 Post subject: Re: About S.A : where is it located ? it's essential ?
PostPosted: February 4th, 2019, 10:21 
Offline
User avatar

Joined: April 3rd, 2011, 0:19
Posts: 2003
Location: Providence, RI
fender wrote:
For example SMART and G-list :

Are they completely indispensable and unique to each unit?


No. They're unique to each unit, but not indispensable. Those can both be cleared.

But the P-List, T-List, Translator, SED modules, head adaptives, service area adaptives, head adaptives, RAP, CAP, service area translator, and many many other modules are completely unique and are indispensable in many cases.

_________________
Data Medics - Hard Drive, SSD, and RAID Data Recovery Service Company


Last edited by data-medics on February 4th, 2019, 10:33, edited 1 time in total.

Top
 Profile  
 
 Post subject: Re: About S.A : where is it located ? it's essential ?
PostPosted: February 4th, 2019, 10:29 
Offline
User avatar

Joined: June 11th, 2013, 17:01
Posts: 1710
Location: Phoenix, AZ USA
I still think this post is about anti-data recovery.

_________________
HDD, SSD, Flash and RAID Data Recovery
Founder of The Data Recovery Professionals Group


Top
 Profile  
 
 Post subject: Re: About S.A : where is it located ? it's essential ?
PostPosted: February 4th, 2019, 10:35 
Offline
User avatar

Joined: April 3rd, 2011, 0:19
Posts: 2003
Location: Providence, RI
ddrecovery wrote:
I still think this post is about anti-data recovery.


Perhaps. Clearly, it's by someone with a vastly over-simplified concept of how a HDD works.

_________________
Data Medics - Hard Drive, SSD, and RAID Data Recovery Service Company


Top
 Profile  
 
 Post subject: Re: About S.A : where is it located ? it's essential ?
PostPosted: February 4th, 2019, 14:25 
Offline

Joined: November 5th, 2018, 8:10
Posts: 43
Location: London
data-medics wrote:
ddrecovery wrote:
I still think this post is about anti-data recovery.


Perhaps. Clearly, it's by someone with a vastly over-simplified concept of how a HDD works.


I'm not a professional, but I like this topic as a hobby. That's why I do not understand many things and I ask.

Thanks a lot for the info data-medics :wink:


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 16 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 76 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group