All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 20 posts ] 
Author Message
 Post subject: recover refurbished drive OOS3000G or tp3000GB
PostPosted: February 14th, 2019, 2:52 
Offline

Joined: January 23rd, 2009, 6:29
Posts: 108
Hi to all
newly, arrived a refurbished hdd seagete 3 tb that i think some heads are weak so i want use head map but i
can access to service area

Hdd detect

Model : OOS3000G
Serial : 00000000
Firmware : ZZZZFFFF
Capacity : 3 TB (5 860 533 168)

in log

Family ID by HDD ID: 58
Selected family......................... : 58, Grenada
Model by ID............................. : OOS3000G

Loading default settings!
Use the options dialog to review and save utility settings.
Then press OK!


Family default settings loading!


Tech Key...
En Tech err! Tech state 0xFF, 0xFF010000
Detecting SA Phys Sct Size...
Can not detect SA phys secotr size by terminal!

in terminal
Family ID by HDD ID: 58
Selected family......................... : 58, Grenada
Model by ID............................. : OOS3000G

Loading default settings!
Use the options dialog to review and save utility settings.
Then press OK!


Family default settings loading!


Tech Key...
En Tech err! Tech state 0xFF, 0xFF010000
Detecting SA Phys Sct Size...
Can not detect SA phys secotr size by terminal!


In terminal

UNLOCK ERROR!

Spin Up
SpinOK
TCC:001B

(P) SATA Reset

ASCII Diag mode

After ctrl +L
F3 T>
Overlay PartNum: 10060942
CFW PartNum: 05272014
Overlay CompileDate: 20131006
CFW CompileDate: 20140527

OverlayCompatibilityCheck failed

Unable to load Diag Cmd Processor Overlay


some command works V1,V2,...
but other command not worked

_________________
NS DATA RECOVERY
www.nsrecovery.ir


Top
 Profile  
 
 Post subject: Re: recover refurbished drive OOS3000G or tp3000GB
PostPosted: February 14th, 2019, 3:03 
Offline

Joined: January 23rd, 2009, 6:29
Posts: 108
I tried load ldr but i dont know what's that fw


i have access to lba but very low speed and not stable

Thanks for any idea !


after short in terminal


Boot 0x40M
Tech Unlock Handshake: 0x98A2AE92
Reply: UNLOCK ERROR!

Spin Up
SpinOK
TCC:0020

(P) SATA Reset

ASCII Diag mode

F3 T>
ASCII Diag mode

F3 T>
ASCII Diag mode

F3 T>
ASCII Diag mode

F3 T>
Boot 0x40M[LBA=0x000042F9][LBA=0x000042F9][LBA=0x00066E3B][LBA=0x00066E3D][LBA=0x0000831D][LBA=0x0000831D][LBA=0x0006AE5F][LBA=0x0006AE6E]
Tech Unlock Handshake: 0xAD182DD5
Reply: UNLOCK ERROR!

Spin Up
SpinOK
TCC:0020

RECOV Servo Op=0600 Resp=0005
RECOV Servo Op=0600 Resp=0005
RECOV Servo Op=0600 Resp=0005
RECOV Servo Op=0600 Resp=0005
(P) SATA Reset

ASCII Diag mode

F3 T>
Boot 0x40M
Tech Unlock Handshake: 0x57BA644E
Reply: UNLOCK ERROR!

Spin Up
SpinOK
TCC:0020

(P) SATA Reset

Boot 0x40M
Tech Unlock Handshake: 0xE8F50467
Reply: UNLOCK ERROR!

Spin Up
SpinOK
TCC:0020

FAIL Servo Op=0055 Resp=0003
0055 071C 0456 7FFF 7FFF 7FFF 0000 0003 0000 0804 43E8 0003 FFFF 03B0 0000 3F00 0058 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
ResponseFrame 0000 0040 0000 0000 0004 FF70 0920 DFA0 0003 0F9F 0F8D 0F79 0F76 0F85 1054 105B 48DB A20F F940 FD69 8420 1886 A1AD 797F CEA6 8F45 0001 204E 2001 0001 0020 0000 0016
RECOV Servo Op=0055 Resp=0005
FAIL Servo Op=0055 Resp=0003
0055 071C 0456 7FFF 7FFF 7FFF FD00 0003 0000 0804 43E8 0003 FFFF 03B0 0000 3F00 0058 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
ResponseFrame 0000 0040 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 1054 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0002 204E 0001 0001 0020 0000 0016
RECOV Servo Op=0055 Resp=0005
SNOOOZZZZZZEEE Retry
SNOOOZZZZZZEEE Retry
SNOOOZZZZZZEEE Retry
SNOOOZZZZZZEEE Retry
SNOOOZZZZZZEEE Retry
SNOOOZZZZZZEEE Retry
ASCII Diag mode

F3 T>
ASCII Diag mode

F3 T>
ASCII Diag mode

F3 T>
SNOOOZZZZZZEEE Retry
MCMainPOR: Start:
User Data Base 0043F340
Check MCMT Version: Factory Init
MCInitialize: Start: Host VBM Size (Bytes): 00000210 Metadata VBM Size (Bytes):
ClearMC: Start Full Starting LBA 0000C400, Count 00432F40[0000000000001880]v00000008qv00000008qv00000008qv00000008qv00000008qv00000008qv00000008qv00000008qv00000008qv00000008q
LPC Disc Xfr: EXCEPTION: ProcessRWError: Status =00000002
Next Accessed LBA = 00001880
Retry LBA = 00001880
Retry Level = 00000000
Starting LBA of RW Request=0000001880 Length=000865E8
ProcessRWError -Write- at LBA 0000001880 Sense Code=C4090081
FAIL Servo Op=0165 Resp=0003
0165 0505 0700 7FFF 7FFF 7FFF 0070 0806 3D46 0A05 43E8 4604 FFFF 0810 0000 7000 0000 000F 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
ResponseFrame 0000 0001 0000 0000 21DA E052 1F16 08A5 0000 0000 0000 0000 0000 0000 1059 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0001 204E 0000 0001 0020 0000 0019
FAIL Servo Op=008F Resp=0003
008F 0500 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
ResponseFrame 6702 0001 FFFF ED3D 21DA E052 1F16 08A5 0000 0000 0000 0000 0000 0000 1059 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0002 1000 0000 0040 0020 0000 0000
RECOV Servo Op=0165 Resp=0005
FAIL Servo Op=0165 Resp=0003
0165 0505 0700 7FFF 7FFF 7FFF 0070 0806 3D46 0A05 43E8 4604 FFFF 0810 0000 7000 0000 000F 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
ResponseFrame 0004 0001 0004 BBDB 21DA E052 1F16 08A5 0000 0000 0000 0000 0000 0000 1170 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0004 204E 0000 0001 0020 0000 FFFF
RECOV Servo Op=0165 Resp=0005[000000002BB5420C]v00000028qv00000008qv
FAIL Servo Op=0165 Resp=0003
0165 0505 0700 7FFF 7FFF 7FFF 0070 0806 3D46 0A05 43E8 4604 FFFF 0810 0000 7000 0000 000F 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
ResponseFrame 0000 0001 0000 0000 21DA E052 1F16 08A5 0000 0000 0000 0000 0000 0000 1053 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0009 204E 0000 0001 0020 0000 0018v00000008qv00000008qv00000008qv00000008qv00000008qv
FAIL Servo Op=0165 Resp=0003
0165 0505 0700 7FFF 7FFF 7FFF 0070 0806 3D46 0A05 43E8 4604 FFFF 0810 0000 7000 0000 000F 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
ResponseFrame 0000 0001 FFFF ED2B 21DA E052 1F16 08A5 0000 0000 0000 0000 0000 0000 1053 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 000A 204E 0000 0001 0020 0000 FFFFv00000028qV00000008qV00000008qV00000028qV
FAIL Servo Op=0165 Resp=0003
0165 0505 0700 7FFF 7FFF 7FFF 0070 0806 3D46 0A05 43E8 4604 FFFF 0810 0000 7000 0000 000F 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
ResponseFrame 0000 0001 FFFF ED1F 21DA E052 1F16 08A5 0000 0000 0000 0000 0000 0000 1053 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 000B 204E 0000 0001 0020 0000 FFFF
ASCII Diag mode

F3 T>V00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV
FAIL Servo Op=0165 Resp=0003
0165 0505 0700 7FFF 7FFF 7FFF 0070 0806 3D46 0A05 43E8 4604 FFFF 0810 0000 7000 0000 000F 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
ResponseFrame 0000 0001 FFFF ED27 21DA E052 1F16 08A5 0000 0000 0000 0000 0000 0000 1053 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 000C 204E 8000 0001 0020 0000 FFFFV00000008qV00000028qV00000008qV
FAIL Servo Op=0165 Resp=0003
0165 0505 0700 7FFF 7FFF 7FFF 0070 0806 3D46 0A05 43E8 4604 FFFF 0810 0000 7000 0000 000F 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
ResponseFrame 0000 0001 FFFF ED1D 21DA E052 1F16 08A5 0000 0000 0000 0000 0000 0000 1053 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 000D 204E 0000 0001 0020 0000 FFFF
ASCII Diag mode

F3 T>V00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV
ASCII Dia00000008gq Vmode

F3 T>00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV
FAIL Servo Op=0165 Resp=0003
0165 0505 0700 7FFF 7FFF 7FFF 0070 0806 3D46 0A05 43E8 4604 FFFF 0810 0000 7000 0000 000F 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
ResponseFrame 0000 0001 FFFF ED21 21DA E052 1F16 08A5 0000 0000 0000 0000 0000 0000 1053 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 000E 204E 8000 0001 0020 0000 FFFF
ASCII Diag mode

F3 T>
RECOV Servo Op=0165 Resp=0005V00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV
FAIL Servo Op=0165 Resp=0003
0165 0505 0700 7FFF 7FFF 7FFF 0070 0806 3D46 0A05 43E8 4604 FFFF 0810 0000 7000 0000 000F 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
ResponseFrame 0001 0001 0000 2513 21DA E052 1F16 08A5 0000 0000 0000 0000 0000 0000 1053 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 000F 204E 0000 0001 0020 0000 FFFF
ASCII Diag mode

F3 T>
ASCII Diag mode

F3 T>
ASCII Diag mode

F3 T>
RECOV Servo Op=0165 Resp=0005V00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000028qV
FAIL Servo Op=0165 Resp=0003
0165 0505 0700 7FFF 7FFF 7FFF 0070 0806 3D46 0A05 43E8 4604 FFFF 0810 0000 7000 0000 000F 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
ResponseFrame 0004 0001 0004 C3B7 21DA E052 1F16 08A5 0000 0000 0000 0000 0000 0000 1053 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0010 204E 0001 0001 0020 0000 FFFF
ASCII Diag mode

F3 T>V00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV
FAIL Servo Op=0165 Resp=0003
0165 0505 0700 7FFF 7FFF 7FFF 0070 0806 3D46 0A05 43E8 4604 FFFF 0810 0000 7000 0000 000F 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
ResponseFrame 0000 0001 FFFF ED07 21DA E052 1F16 08A5 0000 0000 0000 0000 0000 0000 1053 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0011 204E 0000 0001 0020 0000 FFFFV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV
FAIL Servo Op=0165 Resp=0003
0165 0505 0700 7FFF 7FFF 7FFF 0070 0806 3D46 0A05 43E8 4604 FFFF 0810 0000 7000 0000 000F 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
ResponseFrame 0000 0001 FFFF ECFA 21DA E052 1F16 08A5 0000 0000 0000 0000 0000 0000 1053 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0012 204E 0000 0001 0020 0000 FFFFV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV
FAIL Servo Op=0165 Resp=0003
0165 0505 0700 7FFF 7FFF 7FFF 0070 0806 3D46 0A05 43E8 4604 FFFF 0810 0000 7000 0000 000F 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
ResponseFrame 0000 0001 FFFF ECFC 21DA E052 1F16 08A5 0000 0000 0000 0000 0000 0000 1053 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0013 204E 0000 0001 0020 0000 FFFFV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV
FAIL Servo Op=0165 Resp=0003
0165 0505 0700 7FFF 7FFF 7FFF 0070 0806 3D46 0A05 43E8 4604 FFFF 0810 0000 7000 0000 000F 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
ResponseFrame 0000 0001 FFFF ECFE 21DA E052 1F16 08A5 0000 0000 0000 0000 0000 0000 1053 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0014 204E 0001 0001 0020 0000 FFFFV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008qV00000008q[000000002BB5420C]v00000008qv00000008qv00000008qv00000008qv00000008qv00000008qv00000008qv00000008qv00000008q
ASCII Diag mode

F3 T>
ASCII Diag mode

F3 T>
FAILED to spare00000903
Device Fault is set!
.
ClearMC: Completed, Last LBA 000043F340
MCInitialize: MC Cleared
MCInitialize: MCTBufferPtr->Header.MCTStateFlags = 0000000A
MCInitialize: MCTBufferPtr->Header.MCStateFlagsDisc = 00000001
MCInitialize: MCStateFlags = 00000001

Set MCMT Version Current
ASCII Diag mode

F3 T>
[MCMTWS] Tail/Head 0000 0000
MCInitialize: Init complete:
MCMainPOR: MCTStateFlags 00000022 MCStateFlags 00000041 Tms 000027D9
ASCII Diag mode

F3 T>
ASCII Diag mode

F3 T>
SNOOOZZZZZZEEE Retry
SNOOOZZZZZZEEE Retry
MSP MainPOR: Feature Disabled by AMPS
No HOST FIS-ReadyStatusFlags 0002A181
ASCII Diag mode

F3 T>
ASCII Diag mode

F3 T>


Attachments:
File comment: IDD after read rom
rom edit idd .jpg
rom edit idd .jpg [ 347.57 KiB | Viewed 4359 times ]

_________________
NS DATA RECOVERY
www.nsrecovery.ir
Top
 Profile  
 
 Post subject: Re: recover refurbished drive OOS3000G or tp3000GB
PostPosted: February 14th, 2019, 3:05 
Offline

Joined: January 23rd, 2009, 6:29
Posts: 108
after search below link similar my problem
https://forum.acelaboratory.com/viewtopic.php?t=9668

also i tried read terminal but end with error



again
Thanks for any idea


Attachments:
File comment: try for read sa with terminal
try read terminal.png
try read terminal.png [ 140.14 KiB | Viewed 4358 times ]

_________________
NS DATA RECOVERY
www.nsrecovery.ir
Top
 Profile  
 
 Post subject: Re: recover refurbished drive OOS3000G or tp3000GB
PostPosted: February 14th, 2019, 9:25 
Offline

Joined: September 26th, 2016, 4:26
Posts: 48
Location: Russia
hamidbid
Can I see it's ROM? Interesting case. Someone load an incompatible loader into it. There is a small collection. And from refarb too. Maybe something will be selected.


Top
 Profile  
 
 Post subject: Re: recover refurbished drive OOS3000G or tp3000GB
PostPosted: February 14th, 2019, 12:39 
Offline

Joined: January 23rd, 2009, 6:29
Posts: 108
E123 wrote:
hamidbid
Can I see it's ROM? Interesting case. Someone load an incompatible loader into it. There is a small collection. And from refarb too. Maybe something will be selected.


Hi E123

yes I think so


Attachments:
File comment: rom
ROM_00000000_37449BF1.rar [183.22 KiB]
Downloaded 103 times
Top
 Profile  
 
 Post subject: Re: recover refurbished drive OOS3000G or tp3000GB
PostPosted: February 14th, 2019, 15:27 
Offline

Joined: September 26th, 2016, 4:26
Posts: 48
Location: Russia
Unfortunately, I do not have a loader compatible with this ROM and there is no ROM under the overlays 2013.10.06. I can only suggest that the prototype was ST3000DM001-1CH166-899. So there is no need for an unlock. It is only necessary to make compatible ROM and overlays. In this case, I can only offer a risky solution from myself: put an available seagate updateer under 1CH166 into the disk. I have version CC29.


Top
 Profile  
 
 Post subject: Re: recover refurbished drive OOS3000G or tp3000GB
PostPosted: February 16th, 2019, 2:28 
Offline

Joined: January 23rd, 2009, 6:29
Posts: 108
E123 wrote:
Unfortunately, I do not have a loader compatible with this ROM and there is no ROM under the overlays 2013.10.06. I can only suggest that the prototype was ST3000DM001-1CH166-899. So there is no need for an unlock. It is only necessary to make compatible ROM and overlays. In this case, I can only offer a risky solution from myself: put an available seagate updateer under 1CH166 into the disk. I have version CC29.


Thanks for answer
I never have updated fw then I don't know what happen for hard disk
maybe some sections in Rom and Service Area ? is this reversible ?

I have another Rom with another part number ? is this useful

_________________
NS DATA RECOVERY
www.nsrecovery.ir


Top
 Profile  
 
 Post subject: Re: recover refurbished drive OOS3000G or tp3000GB
PostPosted: February 16th, 2019, 8:14 
Offline
User avatar

Joined: April 3rd, 2011, 0:19
Posts: 1944
Location: Providence, RI
If you have LBA access already and terminal access, then I wouldn't bother with trying to update the firmware or anything like that. You can read system file 93 by just using y-modem and the T>r93 command. Turn off all the stuff in the SAP control flags menu, then write it back using the T>w93 command and y-modem.

If for some reason that doesn't work, you can still turn off most of those functions using the F command in terminal manually. It's a bit more complex to explain how to do that, but it should work. Just shoot me a PM if you need help. I don't mind doing a remote session sometime next week.

That should resolve the speed issues.

_________________
Data Medics - Hard Drive, SSD, and RAID Data Recovery Service Company


Top
 Profile  
 
 Post subject: Re: recover refurbished drive OOS3000G or tp3000GB
PostPosted: February 18th, 2019, 4:05 
Offline

Joined: January 23rd, 2009, 6:29
Posts: 108
data-medics wrote:
If you have LBA access already and terminal access, then I wouldn't bother with trying to update the firmware or anything like that. You can read system file 93 by just using y-modem and the T>r93 command. Turn off all the stuff in the SAP control flags menu, then write it back using the T>w93 command and y-modem.

If for some reason that doesn't work, you can still turn off most of those functions using the F command in terminal manually. It's a bit more complex to explain how to do that, but it should work. Just shoot me a PM if you need help. I don't mind doing a remote session sometime next week.

That should resolve the speed issues.


Thanks for Answer,

F3 T>r

HighPowerMode Status 0001 Req 0002
Overlay PartNum: 10060942
CFW PartNum: 05272014
Overlay CompileDate: 20131006
CFW CompileDate: 20140527

OverlayCompatibilityCheck failed

Unable to load Diag Cmd Processor Overlay

F3 T>F

Overlay PartNum: 10060942
CFW PartNum: 05272014
Overlay CompileDate: 20131006
CFW CompileDate: 20140527

OverlayCompatibilityCheck failed

Unable to load Diag Cmd Processor Overlay

F3 T>F,,22

Overlay PartNum: 10060942
CFW PartNum: 05272014
Overlay CompileDate: 20131006
CFW CompileDate: 20140527

OverlayCompatibilityCheck failed

Unable to load Diag Cmd Processor Overlay


It 's not accept This commands in terminal , I don't think it's different with any other terminal program
hdd firmware ignore any special command
some commands are working such as V in T level or 7>x but 7>X not working

I'll be happy for your help?thanks again

_________________
NS DATA RECOVERY
www.nsrecovery.ir


Top
 Profile  
 
 Post subject: Re: recover refurbished drive OOS3000G or tp3000GB
PostPosted: February 18th, 2019, 4:27 
Offline

Joined: January 23rd, 2009, 6:29
Posts: 108
I 'm very appreciate for your information
I learn very useful information about Rom
http://www.hddoracle.com/viewtopic.php? ... ab45c44c89

:D

_________________
NS DATA RECOVERY
www.nsrecovery.ir


Top
 Profile  
 
 Post subject: Re: recover refurbished drive OOS3000G or tp3000GB
PostPosted: February 18th, 2019, 7:38 
Offline

Joined: January 23rd, 2009, 6:29
Posts: 108
I analyzed my refer Rom
in container segment ID 22 000100 ----030000 at both section in Rom (000000-3FFFF,40000-7FFFF)
I found
16 000040 BootFW-DIR
15 000048 General Data
0E 000248 IAP
10 000658 BootFW
03 018000 SFW
0B 02E000 Shell
00 02F100 end container

Interesting , all data in segments at two section are the same

attached all segments


Attachments:
22 container segment.rar [992.55 KiB]
Downloaded 88 times

_________________
NS DATA RECOVERY
www.nsrecovery.ir
Top
 Profile  
 
 Post subject: Re: recover refurbished drive OOS3000G or tp3000GB
PostPosted: February 18th, 2019, 8:09 
Offline

Joined: September 26th, 2016, 4:26
Posts: 48
Location: Russia
You are in the wrong direction headed. If you so want to learn ROM, then here is the F3romExplorer tool https://yadi.sk/d/SpRqMHhE3Vqkvq
And if you do not have access to the UA, then look for a way to fill compatible overlays.
I gave you an updater. And here is another, LodEdit utility:
https://yadi.sk/d/ps0J3Kns3A3KY9
You can disassemble the updater and with the F3romExplorer collect the image CC29 from your own ROM.
Then the updater will be a LOADER for your CC29.


Top
 Profile  
 
 Post subject: Re: recover refurbished drive OOS3000G or tp3000GB
PostPosted: February 18th, 2019, 8:20 
Offline

Joined: January 23rd, 2009, 6:29
Posts: 108
and data in segment General Data is 27.5.2014

I think ,maybe I should find another Rom for 3 tb Grenada family and compare them with my refer to find appropriate fw

also I attached CAP,SAP,RAP my Rom


Attachments:
CAP-ADP-SAP.rar [20.01 KiB]
Downloaded 88 times

_________________
NS DATA RECOVERY
www.nsrecovery.ir
Top
 Profile  
 
 Post subject: Re: recover refurbished drive OOS3000G or tp3000GB
PostPosted: February 18th, 2019, 8:30 
Offline

Joined: January 23rd, 2009, 6:29
Posts: 108
E123 wrote:
You are in the wrong direction headed. If you so want to learn ROM, then here is the F3romExplorer tool https://yadi.sk/d/SpRqMHhE3Vqkvq
And if you do not have access to the UA, then look for a way to fill compatible overlays.
I gave you an updater. And here is another, LodEdit utility:
https://yadi.sk/d/ps0J3Kns3A3KY9
You can disassemble the updater and with the F3romExplorer collect the image CC29 from your own ROM.
Then the updater will be a LOADER for your CC29.


Hi E123
very thanks for share files
sure , i'm going to work on and then left message

_________________
NS DATA RECOVERY
www.nsrecovery.ir


Top
 Profile  
 
 Post subject: Re: recover refurbished drive OOS3000G or tp3000GB
PostPosted: February 18th, 2019, 8:44 
Offline

Joined: September 26th, 2016, 4:26
Posts: 48
Location: Russia
ROM CC29 + loader
https://yadi.sk/d/9FTMofTK-xE7hw


Top
 Profile  
 
 Post subject: Re: recover refurbished drive OOS3000G or tp3000GB
PostPosted: February 25th, 2019, 2:45 
Offline

Joined: January 23rd, 2009, 6:29
Posts: 108
E123 wrote:


The first , I admire you for useful utility
I learn a lot :o

The second Thanks for rebuild Rom and loader
I wrote Rom with terminal after power on
got this message in terminal
Boot 0x40M
Spin Up
Trans.

Disc FW failed to load

after that I used from loader it didn't worked

again wrote refer Rom to Pcb but again got the same message
I changed PCB but again the same message!!? :?:
what happened for Hard disk?

How can I do?


Attachments:
FW failed.jpg
FW failed.jpg [ 275.12 KiB | Viewed 3925 times ]

_________________
NS DATA RECOVERY
www.nsrecovery.ir
Top
 Profile  
 
 Post subject: Re: recover refurbished drive OOS3000G or tp3000GB
PostPosted: February 25th, 2019, 3:02 
Offline

Joined: January 23rd, 2009, 6:29
Posts: 108
E123 wrote:
Unfortunately, I do not have a loader compatible with this ROM and there is no ROM under the overlays 2013.10.06. I can only suggest that the prototype was ST3000DM001-1CH166-899. So there is no need for an unlock. It is only necessary to make compatible ROM and overlays. In this case, I can only offer a risky solution from myself: put an available seagate updateer under 1CH166 into the disk. I have version CC29.


:?
I 'm a little confuse
what's date of 2013.10.06. ? How do you find this date while my data Rom is 2014.27.05?
and In last
How do I load a loader in Grenada family?

I'm so sorry for many questions?

_________________
NS DATA RECOVERY
www.nsrecovery.ir


Top
 Profile  
 
 Post subject: Re: recover refurbished drive OOS3000G or tp3000GB
PostPosted: February 26th, 2019, 6:35 
Offline

Joined: September 26th, 2016, 4:26
Posts: 48
Location: Russia
In your screenshot, the disk has readiness in the ATA registers. Download CC29 loader by ATA. If the ABRT or ERR fails to appear in the registers, use the module "CFW_DISK" from the CC29 loader. This is your 3D loader for MRT. Use the virtual load in MRT.
For dates: do not pay attention. This is me for myself - to identify different versions of the same firmware.


Top
 Profile  
 
 Post subject: Re: recover refurbished drive OOS3000G or tp3000GB
PostPosted: February 26th, 2019, 9:00 
Offline

Joined: September 26th, 2016, 4:26
Posts: 48
Location: Russia
Sorry, stupid.))) Of course, not an MRT, but PC3K. But the meaning is the same, only the names are different.


Top
 Profile  
 
 Post subject: Re: recover refurbished drive OOS3000G or tp3000GB
PostPosted: March 2nd, 2019, 4:14 
Offline

Joined: January 23rd, 2009, 6:29
Posts: 108
E123 wrote:
In your screenshot, the disk has readiness in the ATA registers. Download CC29 loader by ATA. If the ABRT or ERR fails to appear in the registers, use the module "CFW_DISK" from the CC29 loader. This is your 3D loader for MRT. Use the virtual load in MRT.
For dates: do not pay attention. This is me for myself - to identify different versions of the same firmware.


Hi E123
A million Thanks for your response,
after play with loader and cfw-disk finally, I could access to sa and backup from that :D

and built head map ,disabled smp flag

IN continue I tested with another Rom( CC44) and loader (with cfwdisk) and could upgrade fw (from cc29 to cc44)
and in deeper search , I copied sysfile 20D to 20E

after power off/on
Wow :shock: :o :D
hard detect in normal mode ....


again I am really appreciate from E123 and Frank for great help in http://www.hddoracle.com/viewtopic.php?f=59&t=2173

_________________
NS DATA RECOVERY
www.nsrecovery.ir


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 20 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: Majestic-12 [Bot] and 5 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group