All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 6 posts ] 
Author Message
 Post subject: HDD id has not been read
PostPosted: April 9th, 2019, 6:16 
Offline

Joined: April 9th, 2019, 6:09
Posts: 4
Location: India
Hello experts.
greeting of the day.
I am facing the issue while using pc3000 "hdd id has not been read, capacity is .49mb(1000)"
and the status is showing DWF
please help[ me to solve this issue so that i can recover my data.

Thanks


Attachments:
pc3000.png
pc3000.png [ 132.95 KiB | Viewed 12533 times ]
Top
 Profile  
 
 Post subject: Re: HDD id has not been read
PostPosted: April 9th, 2019, 11:43 
Offline
User avatar

Joined: April 3rd, 2011, 0:19
Posts: 2003
Location: Providence, RI
You need to fix whatever is wrong with the hard drive. There's no push-button solution here. I'd start by replacing the PCB and see if that helps. Could be heads, media damage, or any number of other causes. We'd need a lot more information to even attempt to help you.

_________________
Data Medics - Hard Drive, SSD, and RAID Data Recovery Service Company


Top
 Profile  
 
 Post subject: Re: HDD id has not been read
PostPosted: April 10th, 2019, 0:24 
Offline

Joined: April 9th, 2019, 6:09
Posts: 4
Location: India
Spildit wrote:
Full model of your Seagate HDD ?

Most likely it will be a F3 Arch drive and NOT a ST-10 / U5 so you might be using the wrong PC-3000 utility ...


model: Seagate
s/n: 9TX110YJ
ST3320310CS


Top
 Profile  
 
 Post subject: Re: HDD id has not been read
PostPosted: April 12th, 2019, 0:53 
Offline

Joined: April 9th, 2019, 6:09
Posts: 4
Location: India
Spildit wrote:
F3 Arch drive....

Baud rate of 9600 is for older ST-10 ... It will NOT display terminal log on F3 ARCH. You have wrong settings and you are using wrong utility ....

Then give me the solution for this..


Top
 Profile  
 
 Post subject: Re: HDD id has not been read
PostPosted: April 12th, 2019, 1:05 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 15461
Location: Australia
rohitdharan wrote:
Spildit wrote:
F3 Arch drive....

Baud rate of 9600 is for older ST-10 ... It will NOT display terminal log on F3 ARCH. You have wrong settings and you are using wrong utility ....

Then give me the solution for this..

Choose F3 Architecture (Garbo family?), baud rate = 38400bps

_________________
A backup a day keeps DR away.


Top
 Profile  
 
 Post subject: Re: HDD id has not been read
PostPosted: April 14th, 2019, 23:54 
Offline

Joined: April 9th, 2019, 6:09
Posts: 4
Location: India
Thank you ALL for your help and your time :)


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 11 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group