Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 11 posts ] 
  Previous topic | Next topic 
Author Message
posidon
 Post subject: how to deal with this WD mypassport 2TB
PostPosted: May 4th, 2019, 9:02 
Offline

Joined: January 12th, 2016, 3:46
Posts: 139
Location: India
Hi Friends
I have got this WD my passport 2TB as per customer disk asks for format.
This model is not supported in my udma. In sector access disk shows all sectors zero. What could be the issue and possible solution.
Id hardware encryption part is not getting involved is the reason showing all zeros ?(I think it should show garbage instead)
Or WD smartware metadata is corrupt. If anyone has experienced same situation then pls. help.


Attachments:
wd 2t1b.jpg
wd 2t1b.jpg [ 157.89 KiB | Viewed 3826 times ]
Capture.JPG
Capture.JPG [ 45.94 KiB | Viewed 3829 times ]
56.JPG
56.JPG [ 120.94 KiB | Viewed 3829 times ]
Top
 Profile  
 
terminator2
 Post subject: Re: how to deal with this WD mypassport 2TB
PostPosted: May 6th, 2019, 10:21 
Offline

Joined: November 23rd, 2010, 13:32
Posts: 178
Location: brisbane
I have faced several similar cases , each time I could not get access.
Is there any solution ? Possibly no one can recover data from WD 2TB drives since acelab does not support these models as of now.
Top
 Profile  
 
Blizzard
 Post subject: Re: how to deal with this WD mypassport 2TB
PostPosted: May 6th, 2019, 11:04 
Offline
User avatar

Joined: October 21st, 2014, 1:39
Posts: 128
Location: Ellijay, GA
Some SMR drives by Western Digital have an issue with the secondary translator that can cause all sectors to be zero. They also support TRIM on some external models, but it most likely a translator issue. You can test the theory on a Spyglass model. Put some data on it, regen translator, power cycle, now data appears as zeros. There are at least 2 new modules involved. You can read some basic info on WD SMR drives here. I'm guessing Doomer has done some advanced research on these so he might want to expand on this.

_________________
Blizzard Data Recovery
Top
 Profile  
 
posidon
 Post subject: Re: how to deal with this WD mypassport 2TB
PostPosted: May 7th, 2019, 22:23 
Offline

Joined: January 12th, 2016, 3:46
Posts: 139
Location: India
Hi Blizzard
Thanks a ton for detailed explanation :good: :-D
Your post must have enlightened many members who have faced same issue.
Top
 Profile  
 
Doomer
 Post subject: Re: how to deal with this WD mypassport 2TB
PostPosted: May 7th, 2019, 23:38 
Online
User avatar

Joined: September 29th, 2005, 12:02
Posts: 3409
Location: Chicago
Short answer - data is gone.

These drives have a bug(or feature) that sometimes causes the secondary translator to become empty.
When it happens data is usually unrecoverable

_________________
SAN, NAS, RAID, Server, and HDD Data Recovery.
Top
 Profile  
 
posidon
 Post subject: Re: how to deal with this WD mypassport 2TB
PostPosted: May 9th, 2019, 10:07 
Offline

Joined: January 12th, 2016, 3:46
Posts: 139
Location: India
Oh its horrible ,
Thanks a lot Doomer. :good:
Top
 Profile  
 
Corsari
 Post subject: Re: how to deal with this WD mypassport 2TB
PostPosted: May 26th, 2019, 1:45 
Offline

Joined: June 25th, 2006, 13:51
Posts: 137
Location: Italy
@Doomer

GLOM!
that's owfully NASTY

Blizzard talks about two new modules to experiment with but I haven't found a thread where those two modules are listed

do you kindly know their numbers?
Thank you
Top
 Profile  
 
Blizzard
 Post subject: Re: how to deal with this WD mypassport 2TB
PostPosted: May 26th, 2019, 10:11 
Offline
User avatar

Joined: October 21st, 2014, 1:39
Posts: 128
Location: Ellijay, GA
Corsari wrote:
@Doomer

GLOM!
that's owfully NASTY

Blizzard talks about two new modules to experiment with but I haven't found a thread where those two modules are listed

do you kindly know their numbers?
Thank you

I updated the end of the post a few days ago with a little more information and the mod numbers.

_________________
Blizzard Data Recovery
Top
 Profile  
 
Blizzard
 Post subject: Re: how to deal with this WD mypassport 2TB
PostPosted: May 26th, 2019, 10:44 
Offline
User avatar

Joined: October 21st, 2014, 1:39
Posts: 128
Location: Ellijay, GA
I should add, the testing we have done was only with 3-4TB SPyglass models. The experimental information is unrelated to Charger and Palmer and the post was just supposed to be an introduction to new SSD-like translation.

_________________
Blizzard Data Recovery
Top
 Profile  
 
jono-ats
 Post subject: Re: how to deal with this WD mypassport 2TB
PostPosted: May 26th, 2019, 22:57 
Offline
User avatar

Joined: June 8th, 2006, 19:44
Posts: 3064
Location: Atlanta, GA
Modules 189 & 190 on Spyglass. Beware: GOOD modules register as corrupted (checksum error) with PC3K.

_________________
http://www.datasaversllc.com
Top
 Profile  
 
pepe
 Post subject: Re: how to deal with this WD mypassport 2TB
PostPosted: May 30th, 2019, 16:43 
Online

Joined: October 3rd, 2005, 0:40
Posts: 3405
Location: Hungary
yeah, we cursed seagates for using MC. WDs do it the other way, which is a lot more prone to leave us without data apparently...

_________________
Adatmentés - Data recovery
No bitcoin donations :)
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 11 posts ] 

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: Doomer, Google [Bot], Google Adsense [Bot], pepe and 32 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group