All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 9 posts ] 
Author Message
 Post subject: WD40PURZ-85TTDY0 Drive with Dead Rom chip
PostPosted: May 16th, 2019, 13:06 
Offline

Joined: March 23rd, 2017, 1:36
Posts: 8
Location: SriLanka
Hi Everyone,

This drive came to me Totally dead. not spinning or no sign of life what so ever,
i have checked the board and found a blown fuse replaced it and results were same.
then used a doner board and it got busted too. after changing the head assembly now drive does spins up fine and gets ready without any clicking noises with doner ROM
but no sign of life with original ROM,
so i tried reading the original rom via programmer and wrote it back to another chip, still same result.

This drive belongs to Apollo Family and can someone please guide me how to generate the ROM and Rom modules from SA ?.
?

or else if anyone can have a look at my original ROM dump and help me down here im attaching my original ROM Dump

Thanks in advanaced


Attachments:
W25X40_20190516_33049.zip [237.62 KiB]
Downloaded 610 times
Top
 Profile  
 
 Post subject: Re: WD40PURZ-85TTDY0 Drive with Dead Rom chip
PostPosted: May 16th, 2019, 17:32 
Offline

Joined: March 23rd, 2017, 1:36
Posts: 8
Location: SriLanka
thanks for the quick reply,

this drive belongs to one of my best friends.
so i gotta talk to him about whole shipping thing,

anyway if im gonna ship it, may i know to where should i ship ??


Top
 Profile  
 
 Post subject: Re: WD40PURZ-85TTDY0 Drive with Dead Rom chip
PostPosted: May 16th, 2019, 18:34 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 15461
Location: Australia
AFAICT, this looks like a case where the 1.8V ROM has been dumped with a 3.3V tool. The result is that dwords are randomly omitted from the dump.

I would extract the ROYL modules by hand and hope that they have not been corrupted. Otherwise these adaptive modules would need to be repaired.

_________________
A backup a day keeps DR away.


Top
 Profile  
 
 Post subject: Re: WD40PURZ-85TTDY0 Drive with Dead Rom chip
PostPosted: May 16th, 2019, 18:57 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 15461
Location: Australia
Here are the ROYL sections:

Attachment:
ROYL_sections.7z [1.51 KiB]
Downloaded 578 times


I have not tested their checksums or adjusted their sizes.

Module 0x0B appears to be missing.

Module "0x00" is a mystery to me.

There are two copies of 0x0A, 0x0D and 0x4F. One copy is a template, the other is the real thing.

_________________
A backup a day keeps DR away.


Top
 Profile  
 
 Post subject: Re: WD40PURZ-85TTDY0 Drive with Dead Rom chip
PostPosted: May 17th, 2019, 0:47 
Offline

Joined: March 23rd, 2017, 1:36
Posts: 8
Location: SriLanka
if it was 3.0V chip it should be dead in the reader right ??? and when i plug in the board with the original rom there is no response from the board,
other than the power indicator on status register.

is there anyway that i can dump the ROM using MRT and the board ??


Top
 Profile  
 
 Post subject: Re: WD40PURZ-85TTDY0 Drive with Dead Rom chip
PostPosted: May 17th, 2019, 1:10 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 15461
Location: Australia
I suspect that the ROM has been dumped previously, and that the corrupted dump was then written back to a donor PCB.

As for physical damage, I suspect that the original ROM probably survived, although it did not dump correctly.

ISTM that your best plan of action would be to find a donor ROM image from the same firmware version, patch the patient's adaptives into the donor ROM, and then write this patched image back to the patient PCB. That should be an easy thing to do.

_________________
A backup a day keeps DR away.


Top
 Profile  
 
 Post subject: Re: WD40PURZ-85TTDY0 Drive with Dead Rom chip
PostPosted: May 17th, 2019, 1:29 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 15461
Location: Australia
Could we see a photo of the original PCB?

_________________
A backup a day keeps DR away.


Top
 Profile  
 
 Post subject: Re: WD40PURZ-85TTDY0 Drive with Dead Rom chip
PostPosted: May 17th, 2019, 1:51 
Offline

Joined: March 23rd, 2017, 1:36
Posts: 8
Location: SriLanka
there you go


Attachments:
20190517_111139.jpg
20190517_111139.jpg [ 2.16 MiB | Viewed 13206 times ]
20190517_111132.jpg
20190517_111132.jpg [ 2.2 MiB | Viewed 13206 times ]
Top
 Profile  
 
 Post subject: Re: WD40PURZ-85TTDY0 Drive with Dead Rom chip
PostPosted: May 17th, 2019, 2:11 
Offline

Joined: March 23rd, 2017, 1:36
Posts: 8
Location: SriLanka
Found a firmware on HDD surgery firmware which is dated as 12/7/18 database and wrote rom and rom modules from that. and now drive works, it is slow, gotta do the slow fix.. now backing up the modules. thanks for your valuable time everyone :)


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 9 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 9 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group