All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 13 posts ] 
Author Message
 Post subject: Pinout scheme of 8GB Kingston DTSE9 monolith USB
PostPosted: June 12th, 2019, 10:45 
Offline

Joined: June 12th, 2019, 4:58
Posts: 3
Location: Poland
Hi everyone,
One of my colleagues brought to me 8GB Kingston DTSE9 monolith USB memory. The system did not see it. I removed the upper coating and got access to the copper layer. I have searched the net but I could not find the right pinout scheme. Maybe some of you had already same problem and could assist. Thank you in advance for your help.
Mariusz


Attachments:
File comment: Copper layer of 8GB Kingston DTSE9 monolith USB memory
20190612_122131.jpg
20190612_122131.jpg [ 4.9 MiB | Viewed 1464 times ]
Top
 Profile  
 
 Post subject: Re: Pinout scheme of 8GB Kingston DTSE9 monolith USB
PostPosted: June 12th, 2019, 10:54 
Offline

Joined: November 29th, 2006, 10:08
Posts: 7463
Location: UK
May I ask, which flash recovery tool are you planning to use with this device?

Soft Center? PC3k Flash? VNR?

It’s a pretty common pinout and readily available from the above developers.

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!


Top
 Profile  
 
 Post subject: Re: Pinout scheme of 8GB Kingston DTSE9 monolith USB
PostPosted: June 12th, 2019, 16:00 
Offline

Joined: October 24th, 2009, 15:22
Posts: 639
Location: Poland
If you can outsource case let me know.

_________________
Odzyskiwanie danych


Top
 Profile  
 
 Post subject: Re: Pinout scheme of 8GB Kingston DTSE9 monolith USB
PostPosted: June 13th, 2019, 4:56 
Offline

Joined: June 12th, 2019, 4:58
Posts: 3
Location: Poland
I was going to use PC3k Flash, but I could not find this scheme on http://www.pc3000flash.com/solbase/mono ... 8&lang=eng.
Would you be able to assist ?


Top
 Profile  
 
 Post subject: Re: Pinout scheme of 8GB Kingston DTSE9 monolith USB
PostPosted: June 13th, 2019, 7:29 
Offline

Joined: June 12th, 2019, 4:58
Posts: 3
Location: Poland
I was going to use PC3k Flash, but I could not find the right scheme in ACELab global solution center. Any help with this scheme would be much appreciated.


Top
 Profile  
 
 Post subject: Re: Pinout scheme of 8GB Kingston DTSE9 monolith USB
PostPosted: June 13th, 2019, 8:06 
Offline
User avatar

Joined: February 9th, 2009, 16:13
Posts: 2226
Location: Ontario, Canada
As I see it, you have several options:

1. Pay someone who has figured it out to provide it to you
2. Outsource to someone who has it figured out
3. Buy the tools necessary to figure it out yourself
4. Wait and see if it ever shows up in the ACE global solution center

To be honest, having Arvika in the same country makes it a no brainer to outsource to them.

_________________
Luke
RAID Data Recovery


Top
 Profile  
 
 Post subject: Re: Pinout scheme of 8GB Kingston DTSE9 monolith USB
PostPosted: June 13th, 2019, 10:12 
Offline
User avatar

Joined: March 6th, 2010, 3:46
Posts: 391
Location: Kolding | Denmark
arvika wrote:
If you can outsource case let me know.


+1 outsource to arvika

_________________
Digitalsupport Data Recovery
https://digitalsupport.dk


Top
 Profile  
 
 Post subject: Re: Pinout scheme of 8GB Kingston DTSE9 monolith USB
PostPosted: June 13th, 2019, 14:37 
Offline

Joined: November 29th, 2006, 10:08
Posts: 7463
Location: UK
digisupport wrote:
arvika wrote:
If you can outsource case let me know.


+1 outsource to arvika


+2 for Arvika, he’s local to you :-)

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!


Top
 Profile  
 
 Post subject: Re: Pinout scheme of 8GB Kingston DTSE9 monolith USB
PostPosted: June 13th, 2019, 23:28 
Offline

Joined: July 30th, 2012, 3:37
Posts: 256
Location: Fairfield, CT USA
A common failure on this model is the fuse blowing.. measure +5 to GND for resistance, if there is none it is a blown fuse, fix it accordingly :-)

_________________
Recover My Flash Drive


Top
 Profile  
 
 Post subject: Re: Pinout scheme of 8GB Kingston DTSE9 monolith USB
PostPosted: June 14th, 2019, 7:17 
Offline
User avatar

Joined: December 4th, 2012, 1:35
Posts: 3372
Location: Adelaide, Australia
jeremyb wrote:
A common failure on this model is the fuse blowing.. measure +5 to GND for resistance, if there is none it is a blown fuse, fix it accordingly :-)


Yep, Just use the X-ray machine and Lazer you have laying around...


Top
 Profile  
 
 Post subject: Re: Pinout scheme of 8GB Kingston DTSE9 monolith USB
PostPosted: June 14th, 2019, 17:27 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 11715
Location: Australia
HaQue wrote:
jeremyb wrote:
A common failure on this model is the fuse blowing.. measure +5 to GND for resistance, if there is none it is a blown fuse, fix it accordingly :-)

Yep, Just use the X-ray machine and Lazer you have laying around...

If you know the location of the uncovered V+ pad (B), then measure its resistance to the corresponding pin (A) of the edge connector. No need for a laser.

However, before bridging the fuse (F), I would first confirm that there is no excessively low resistance between V+ and ground.

Code:
                  controller
           F      .---------.    .------.
       A  ___  B  |   .----.|    |      |
+5V o--+-|___|-+------|3.3V|---+-|      |
       |       |  |   |reg ||  | |      |
      ---      |  |   '----'|  | | NAND |
      ---      |  |         |  | |      |
       |       |  '---------'  | '------'
Gnd o--+       |               |
       |      ---             ---
      ===     --- capacitors  ---
      GND      |               |
              ===             ===
              GND             GND

The above diagram is for a USB flash drive, but the principle is the same.

BTW, have people never heard of cropping their images?

_________________
A backup a day keeps DR away.


Top
 Profile  
 
 Post subject: Re: Pinout scheme of 8GB Kingston DTSE9 monolith USB
PostPosted: June 14th, 2019, 17:33 
Offline
User avatar

Joined: June 11th, 2013, 17:01
Posts: 1276
Location: Phoenix, AZ USA
fzabkar wrote:
BTW, have people never heard of cropping their images?

Personally I think it is a very nice table.... :wink:

_________________
HDD, SSD, Flash and RAID Data Recovery


Top
 Profile  
 
 Post subject: Re: Pinout scheme of 8GB Kingston DTSE9 monolith USB
PostPosted: June 17th, 2019, 10:24 
Offline

Joined: July 30th, 2012, 3:37
Posts: 256
Location: Fairfield, CT USA
HaQue wrote:
jeremyb wrote:
A common failure on this model is the fuse blowing.. measure +5 to GND for resistance, if there is none it is a blown fuse, fix it accordingly :-)


Yep, Just use the X-ray machine and Lazer you have laying around...

You don't need an X-Ray, its very very easy to guess where the fuse is..

The question is how to get into the monolithic chip easily, perhaps a CNC machine???

_________________
Recover My Flash Drive


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 13 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 6 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group