Main » Forums home » PC-3000 support forum

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 8 posts ] 
  Print view Previous topic | Next topic 
Author Message
AYNIADAM
 Post subject: rosewood abr error
PostPosted: October 26th, 2019, 6:56 
Offline

Joined: June 12th, 2012, 7:03
Posts: 6
Hello there. I have a rosewood dm35 1 tb disc. Device error detected "ABR". terminal is working. id cannot. all system files can be read and backed up. Translator command successful. but again can not id. abr error rosewood. Do you think there is a solution?
Top
 Profile  
 
digisupport
 Post subject: Re: rosewood abr error
PostPosted: October 26th, 2019, 8:21 
Offline
User avatar

Joined: March 6th, 2010, 3:46
Posts: 601
Location: Kolding | Denmark
Have a few questions

What tool do you use?
How do you unlock if terminal is not working?
What "translator command" is successful?

_________________
Digitalsupport Data Recovery
https://digitalsupport.dk
Top
 Profile  
 
AYNIADAM
 Post subject: Re: rosewood abr error
PostPosted: October 26th, 2019, 9:45 
Offline

Joined: June 12th, 2012, 7:03
Posts: 6
I'm using PC3K. terminal lock is on. all sysfile backed up.
m0,6,2,,,,,22 succesful

"abr" error continues.
Top
 Profile  
 
AYNIADAM
 Post subject: Re: rosewood abr error
PostPosted: October 26th, 2019, 10:13 
Offline

Joined: June 12th, 2012, 7:03
Posts: 6
Code:
Boot 0x80M
Tech Unlock Handshake: 0x9678E8F8
Reply:

QB
Rst 0x80MSrv DETCR init 0x0000
PrgF
(P) SATA Reset

RAW OFF
PASS
(DOS Table) Worst Count: 00000000 At SU: FFFFFFFF NT: 00000000 OT: 00000000
(POR) Recover Secondary MCMT Opened Recovered
MSP213
(MC POR Duration): 00000000D6
Intel 6G->3G
Send Status: COMRESET seen
CSpd= 3Gbps
DSC
ASCII Diag mode

F3 T>
ASCII Diag mode

F3 T>V40
Nonresident GList                    0 entries returned
Total entries available: 0
          PBA           Len  Flags  Phy Cyl Hd  PhySctr    SFI

F3 T>V4
Reassigned Sectors List Enabled
Entries: 0000, Alts: 0000, Removed: 0000,
Pending: 0000, Host Pending: 0000, Max RSL Size: 00002000

Idx  LBA          PBA          LLLCHS of LBA Wdg PLPCHS of PBA SFI    Hours Msecs  Status   BBM Mask

F3 T>/1

F3 1>N1

Clear Current Device Internal Status Log
Clear SMART is completed.
F3 1>
ASCII Diag mode

F3 T>
ASCII Diag mode

F3 T>/

F3 T>m0,6,2,,,,,22
Max Wr Retries = 08, Max Rd Retries = 32,  Max Iterations = FF, Max Certify Rewrite Retries = 14E8
Ev LBA/Soft XferLen  Zn Trk      Hd Sct  Wdg  PBA      ErrCode

(DOS) File Save Pass  Wrst Ct: 0000 SU: FFFFFFFF NT: 00000000 OT: 00000000
(DOS Table) Worst Count: 00000000 At SU: FFFFFFFF NT: 00000000 OT: 00000000
MCMainPOR: Start:
Media Cache Data Base  00747B05D8
MCInitialize: Start:  Host VBM Size (Bytes): 00000210 Metadata VBM Size (Bytes):   Starting LBA 00747B05D8, Count 01CF8718..
ClearMC:  Completed, Last LBA 00764A8CF0
TCC:0020:002F
MCInitialize:  MC Cleared
MCInitialize:  MCMTBufferPtr->Header.MCMTHeader.MediaCacheDiscStateFlags = 0000000A
MCInitialize:  MCMTBufferPtr->Header.MCMTHeader.MCStateFlagsDisc = 00000001
MCInitialize:  MCStateFlags = 00000001

MCMT Save:Pass
MCInitialize: Init complete:
MCMainPOR: MediaCacheDiscStateFlags 00000022  MCStateFlags 00000040
(MC POR Duration): 000001A879
User Partition Format Successful - Elapsed Time 0 mins 00 secs       
Total capacity 00000EEE9096 PBAs. SMR spares left 0 PBAs [+0.00e-0%], UMP spares left 3055C PBAs [+7.90e-2%].

F3 T>
Boot 0x80M
Tech Unlock Handshake: 0xA24425A0
Reply:

QB
Rst 0x80MSrv DETCR init 0x0000
PrgF
(P) SATA Reset

RAW OFF
PASS
(DOS Table) Worst Count: 00000000 At SU: FFFFFFFF NT: 00000000 OT: 00000000
MSP213
(MC POR Duration): 000000003C
Intel 6G->3G
Send Status: COMRESET seen
CSpd= 3Gbps
DSC
FAFH_TRIGGER_POWER_UP


Top
 Profile  
 
unknown
 Post subject: Re: rosewood abr error
PostPosted: October 26th, 2019, 10:30 
Offline

Joined: October 21st, 2007, 8:48
Posts: 1631
Translator regeneration wasn't necessary .
Top
 Profile  
 
AYNIADAM
 Post subject: Re: rosewood abr error
PostPosted: October 26th, 2019, 11:51 
Offline

Joined: June 12th, 2012, 7:03
Posts: 6
How to solved problem?
Top
 Profile  
 
AYNIADAM
 Post subject: Re: rosewood abr error
PostPosted: October 26th, 2019, 14:47 
Offline

Joined: June 12th, 2012, 7:03
Posts: 6
Is there anyone to help?
Top
 Profile  
 
AYNIADAM
 Post subject: Re: rosewood abr error
PostPosted: November 7th, 2019, 6:32 
Offline

Joined: June 12th, 2012, 7:03
Posts: 6
Problem solved
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 8 posts ] 

Main » Forums home » PC-3000 support forum

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 6 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group