View topic - Problem with a Seagate ST31500341AS (motor)

Main » Forums home » PC-3000 support forum

All times are UTC - 5 hours [ DST ]

Problem with a Seagate ST31500341AS (motor)

Page 1 of 1

[ 2 posts ]

Print view

Previous topic | Next topic

Author

Message

Loutrage

Post subject: Problem with a Seagate ST31500341AS (motor)

Posted: November 13th, 2019, 12:13

Joined: October 17th, 2019, 7:44
Posts: 4
Location: Belgium

Hello !

I tried to recover datas from a damaged Seagate ST31500341AS.

When I connect the device to PC3000, I heard that the motor try to start as you can see in this printscreen in attachment.
The disk is in busy state. After 4 or 5 minutes, the motor stop completely.

Do you have an idea if this hard drive can be repair with PC3000 or I have to change some parts ?

Thank you for your advices !

Attachments:

motor_problem.PNG [ 14.84 KiB | Viewed 7018 times ]

Top

pcimage

Post subject: Re: Problem with a Seagate ST31500341AS (motor)

Posted: November 13th, 2019, 16:53

Joined: November 29th, 2006, 10:08
Posts: 7843
Location: UK

My money is on it being seized solid.

So will require platters and heads swap into a good chassis.

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!

Top

Page 1 of 1

[ 2 posts ]

Main » Forums home » PC-3000 support forum

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 25 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum