All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 11 posts ] 
Author Message
 Post subject: Free training material
PostPosted: April 20th, 2020, 17:07 
Offline
User avatar

Joined: February 27th, 2009, 3:26
Posts: 1721
Location: French Polynesia Tahiti
To help out during this period of world pandemic I have found all my very old training material. I am handing out this for free right now. Keep in mind this is from 2009 to 2011 and it is older information. They were just course outlines that I had made for the classes I taught. But they are good reference material. I am also handing this out because people have been stealing this information and making training classes and selling it off. So now instead of paying for ripped-off material you can have it for free.


Attachments:
logical recovery chapter 4 [Compatibility Mode].pdf [313.07 KiB]
Downloaded 1831 times
introduction to hard drives 1 [Compatibility Mode].pdf [479.71 KiB]
Downloaded 1748 times
Hard drive Storage 2 [Compatibility Mode].pdf [350.78 KiB]
Downloaded 1618 times
FW and SA chapter 5 [Compatibility Mode].pdf [778.01 KiB]
Downloaded 1801 times
determine HD problems 3 [Compatibility Mode].pdf [81.47 KiB]
Downloaded 1642 times
cast studies chapter 18 [Compatibility Mode].pdf [444.82 KiB]
Downloaded 1684 times

_________________
Iorana Haraharaini
Top
 Profile  
 
 Post subject: Re: Free training material
PostPosted: April 20th, 2020, 17:40 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 15440
Location: Australia
Thanks.

_________________
A backup a day keeps DR away.


Top
 Profile  
 
 Post subject: Re: Free training material
PostPosted: April 21st, 2020, 5:29 
Offline
User avatar

Joined: May 13th, 2019, 7:50
Posts: 907
Location: Nederland
Thank you!

_________________
Joep - http://www.disktuna.com - video & photo repair & recovery service


Top
 Profile  
 
 Post subject: Re: Free training material
PostPosted: April 21st, 2020, 6:18 
Offline
User avatar

Joined: December 4th, 2012, 1:35
Posts: 3844
Location: Adelaide, Australia
Thank You!


Top
 Profile  
 
 Post subject: Re: Free training material
PostPosted: April 22nd, 2020, 1:56 
Offline

Joined: August 3rd, 2012, 7:47
Posts: 394
Location: slovenija
Thank you Ann


Top
 Profile  
 
 Post subject: Re: Free training material
PostPosted: June 1st, 2020, 11:53 
Offline
User avatar

Joined: April 20th, 2017, 7:28
Posts: 121
Thank you !


Top
 Profile  
 
 Post subject: Re: Free training material
PostPosted: March 12th, 2021, 12:21 
Offline
User avatar

Joined: May 29th, 2020, 19:08
Posts: 97
Location: Tunisia
Thank you!

_________________
Slim Farza

Arobas Uldry Tunis
I.T. support and data recovery.

http://tunis.ausarl.ch


Top
 Profile  
 
 Post subject: Re: Free training material
PostPosted: April 10th, 2021, 9:55 
Offline

Joined: April 9th, 2021, 3:47
Posts: 85
Location: Yemen
thanks a lot


Top
 Profile  
 
 Post subject: Re: Free training material
PostPosted: June 27th, 2022, 19:59 
Offline

Joined: September 3rd, 2017, 7:52
Posts: 3
Location: Brazil
Thank you!


Top
 Profile  
 
 Post subject: Re: Free training material
PostPosted: June 27th, 2022, 23:35 
Offline

Joined: November 23rd, 2010, 13:32
Posts: 461
Location: brisbane
poehere wrote:
To help out during this period of world pandemic I have found all my very old training material. I am handing out this for free right now. Keep in mind this is from 2009 to 2011 and it is older information. They were just course outlines that I had made for the classes I taught. But they are good reference material. I am also handing this out because people have been stealing this information and making training classes and selling it off. So now instead of paying for ripped-off material you can have it for free.


Thank you so much Ann :good: :-D
This knowledge is indeed priceless. It will help many peoples .
Appreciate all the efforts.


Top
 Profile  
 
 Post subject: Re: Free training material
PostPosted: June 27th, 2022, 23:55 
Offline

Joined: September 1st, 2012, 6:16
Posts: 182
Location: Universe
poehere wrote:
To help out during this period of world pandemic I have found all my very old training material. I am handing out this for free right now. Keep in mind this is from 2009 to 2011 and it is older information. They were just course outlines that I had made for the classes I taught. But they are good reference material. I am also handing this out because people have been stealing this information and making training classes and selling it off. So now instead of paying for ripped-off material you can have it for free.


Hi poehere
Thanks. I want to know pricing of latest material . I am keen to buy specific Service area /Firmware related study material as well as firmware repair process using pc3000 ( though ace manual and youtube channel has information available ,it is not comprehensive and covers basic simple cases only)
Actual knowledge comes from self experimentation ,but peoples like me don't have sufficient time for research as being a single one man army we will have to handle all business activities.
I am also keen to outsource my firmware recovery (pc3000 ) remotely as I will get expert technical support.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 11 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group