Main » Forums home » Software and hardware tools

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 11 posts ] 
  Print view Previous topic | Next topic 
Author Message
bubu321
 Post subject: home made pc pci
PostPosted: July 13th, 2006, 3:39 
Offline

Joined: November 4th, 2005, 7:10
Posts: 65
hi,
- how to make firmware for this home made pc pci, IP cores from ISE Web ?

Image

--> refresh..
Top
 Profile  
 
bubu321
 Post subject:
PostPosted: July 16th, 2006, 8:33 
Offline

Joined: November 4th, 2005, 7:10
Posts: 65
hi,
BOM of project


Code:
Partlist

EAGLE Version 4.13 Copyright (c) 1988-2004 CadSoft

Part     Value          Device        Package   Library                          Sheet

IC7      XCF01S-VO20    XCF01S-VO20   VO20      xilinx_virtexii-xc2v80&flashprom 1
IC8      LM1117DTX-2.5  LM1117DTX-2.5 TO252     lm1117                           1
IC9      LM1117DTX-3.3  LM1117DTX-3.3 TO252     lm1117                           1
PCI1                    PCI2-SLOTB+   PCI_BRDB+ con-pc                           1
QG1      20 MHz         QG5460        DIL08S    crystal                          1
U1       XC2S100-PQ208  XC2S100-PQ208 PQFP-208  idegrabb                         1
U2       XC9572XL-VQ44  XC9572VQ44    VQ44      XILINX                           1
U3       74HC245        74245+        SO20W     74xx-eu                          1
U4       74HC245        74245+        SO20W     74xx-eu                          1
U5       74HC245        74245+        SO20W     74xx-eu                          1
U6       74Hc245        74245+        SO20W     74xx-eu                          1
U7       74HC245        74245+        SO20W     74xx-eu                          1
U8       74HC245        74245+        SO20W     74xx-eu                          1
U9       XC17S200-PD8   XC17S200A-PD8 DIL08     seng                             1
U16      330            4X0805        4X1206    idegrabb                         1
U17      330            4X0805        4X1206    idegrabb                         1
U18      330            4X0805        4X1206    idegrabb                         1
U19      330            4X0805        4X1206    idegrabb                         1
U20      330            4X0805        4X1206    idegrabb                         1
U21      330            4X0805        4X1206    idegrabb                         1
U24      330            4X0805        4X1206    idegrabb                         1
U25      330            4X0805        4X1206    idegrabb                         1
U26      330            4X0805        4X1206    idegrabb                         1
U27      330            4X0805        4X1206    idegrabb                         1
W1       ATA-0          AWP-40K       057-040-0 idegrabb                         1


:D
Top
 Profile  
 
hddguru
 Post subject:
PostPosted: July 16th, 2006, 15:00 
Offline
User avatar

Joined: September 27th, 2005, 14:14
Posts: 125
Location: In the Middle - bit to the left
looks like aclabs PCI card :roll:

_________________
A man is as old as he feels, and a woman as old as she looks
Top
 Profile  
 
Dmitry Postrigan
 Post subject:
PostPosted: July 16th, 2006, 21:42 
Offline

Joined: September 27th, 2005, 8:21
Posts: 765
Same for me :roll:
Top
 Profile  
 
bubu321
 Post subject:
PostPosted: July 17th, 2006, 2:39 
Offline

Joined: November 4th, 2005, 7:10
Posts: 65
hi,

- ops sorry.
- but not truth in 100%, this "project" contain xcf01 chip extra.

:wink:
Top
 Profile  
 
bubu321
 Post subject:
PostPosted: July 20th, 2006, 14:26 
Offline

Joined: November 4th, 2005, 7:10
Posts: 65
hi,
next step: IP Core, set true address of BAR0, BAR1, BAR2

Image

Image
Top
 Profile  
 
bubu321
 Post subject:
PostPosted: July 27th, 2006, 12:44 
Offline

Joined: November 4th, 2005, 7:10
Posts: 65
hi,
boundary scan by JTAG

Image

Image
Top
 Profile  
 
bubu321
 Post subject:
PostPosted: September 10th, 2006, 3:54 
Offline

Joined: November 4th, 2005, 7:10
Posts: 65
hi,

- refresh about project.

Image


:lol:
Top
 Profile  
 
gmosin
 Post subject:
PostPosted: September 28th, 2006, 18:16 
Offline

Joined: September 28th, 2006, 18:06
Posts: 4
Hi bubu321
you project is good . what about jtag dumping of pci3000 xilinx spartan , you have a dump of microcode? Please share jtag cable datasheet wich connected on JP2 (diag) and soft for dumping. I trying to home made pci.
Top
 Profile  
 
bubu321
 Post subject:
PostPosted: October 2nd, 2006, 2:26 
Offline

Joined: November 4th, 2005, 7:10
Posts: 65
hi,

- jp2 connector ( DIAG) only connect to 17s200 not xc9572xl.
- 17s200 ( 17s1500 control configuration of xc2s200 Spartan.
- xc9572xl save s/n and some little configuration file, clock.
Top
 Profile  
 
a_lex
 Post subject:
PostPosted: November 23rd, 2006, 8:11 
Offline

Joined: November 23rd, 2006, 7:50
Posts: 6
Looks attractive :wink:

How is it going, btw
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 11 posts ] 

Main » Forums home » Software and hardware tools

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 19 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group