I have 2 N40P drives that show G-list as "-" "-" "-" ie 2 dashes rather than 3 check marks. I presume it is corrupt. When I try to correct by going to module correction menu and pressing "ATPOL g-list" to fix it. I get a "module correction error" and the g-list is not fixed. I have the right ldr file and I have tried in master and safe mode. Any suggestions?

can you help me understand please, master mode and safe mode?


thanks.

your g-list is too corrupt to repair
you need to over write the module with another g-list from a similar model
the erase the g-list

First get the complete firmware of the hdd u want to fix , put the firmware in the pc3k directory then goto the wirte modules option chk module 1B which is glist . rewirte it and the hdd becomes ok
Hope that helps!!

"Check Structure firmware" because I think you have many modules defective in "system area".
Regards