All times are UTC - 5 hours [ DST ]


Forum rules


Please do not post questions about data recovery cases here (use this forum instead). This forum is for topics on finding new ways to recover data. Accessing firmware, writing programs, reading bits off the platter, recovering data from dust...



Post new topic Reply to topic  [ 24 posts ]  Go to page 1, 2  Next
Author Message
 Post subject: Seagate 7200.11 Terminal Commands :
PostPosted: April 11th, 2009, 9:52 
Offline
User avatar

Joined: December 19th, 2006, 8:49
Posts: 10828
Location: Portugal
Just for reference, here is a list of Seagate 7200.11 terminal commands :

F3 C>Q

Online ^A: Rev 0002.0000, Flash, DisplayFirmwareRev
Online ^B: Rev 0001.0000, Flash, GetThermistorTemperature
Online ^C: Rev 0001.0000, Flash, FirmwareReset
Online ^D: Rev 0001.0000, Flash, ToggleRwTracing
Online ^E: Rev 0001.0000, Flash, DisplayInterfaceConfig
Online ^F: Rev 0001.0000, Flash, DisplayInterfaceRdCacheInfo
Online ^I: Rev 0001.0000, Flash, DisplayControllerRegs
Online ^K: Rev 0001.0000, Flash, DisplayDstStatus
Online ^L: Rev 0003.0000, Flash, DisplaySignOnMsg
Online CR: Rev 0001.0000, Flash, Abort
Online ^N: Rev 0001.0000, Flash, ToggleRwTracing
Online ^P: Rev 0001.0000, Flash, ToggleDiagIdleMode
Online ^Q: Rev 0001.0000, Flash, ResumeInterfaceTask
Online ^R: Rev 0001.0000, Flash, EnableAsciiOnlineSerialPortMode
Online ^S: Rev 0001.0000, Flash, PauseInterfaceTask
Online ^T: Rev 0001.0000, Flash, EnableEslipSerialPortMode
Online ^U: Rev 0001.0000, Flash, DisplayCongen
Online ^V: Rev 0001.0000, Flash, ToggleInterfaceCmdEcho
Online ^W: Rev 0001.0000, Flash, RwStatsEnableAndInit
Online ^X: Rev 0001.0000, Flash, DisplayInterfaceAndRwCmdHistory
Online ^Y: Rev 0001.0000, Flash, DisplayDstStatus
Online ^Z: Rev 0001.0000, Flash, EnableAsciiDiagSerialPortMode
Online ESC: Rev 0001.0000, Flash, AbortLoopOrBatchFile
Online ^\: Rev 0001.0000, Flash, ToggleDebugDisplayEnable
Online !: Rev 0001.0000, Flash, DisplayRdChannelRegs
Online %: Rev 0001.0000, Flash, DisplayMuxStatus (Obsolete)
Online .: Rev 0001.0000, Flash, DisplayActiveStatus
Online ;: Rev 0001.0000, Flash, DisplayMachineStatus (Obsolete)
Online <: Rev 0001.0000, Flash, DecRwScopeSync
Online >: Rev 0001.0000, Flash, IncRwScopeSync
Online : Rev 0001.0000, Flash, DisplayDiagBufferInfo
Online `: Rev 0001.0000, Flash, DisplayRwStats
Online : Rev 0001.0000, Flash, ToggleEibTracing
Online ~: Rev 0001.0000, Flash, DisplayInterfaceCmdState

All Levels CR: Rev 0001.0000, Flash, Abort
All Levels *: Rev 0001.0000, Overlay, SpecialBatchFileFunction, *[FuncId],[FuncParm0],[FuncParm1]
All Levels +: Rev 0001.0000, Flash, PeekMemoryByte, +[AddrHi],[AddrLo],[Opts]
All Levels -: Rev 0001.0000, Flash, PeekMemoryWord, -[AddrHi],[AddrLo],[Opts]
All Levels /: Rev 0001.0000, Flash, ChangeDiagLevel, /[Level]
All Levels =: Rev 0001.0000, Flash, PokeMemoryByte, =[AddrHi],[AddrLo],[Data],[Opts]
All Levels @: Rev 0001.0000, Overlay, BatchFileLabel, @[LabelNum]
All Levels A: Rev 0002.0000, Overlay, SetTestSpace, A[OptsOrParmSelect],[ParmValue],[AddrType]
All Levels L: Rev 0001.0000, Overlay, EnableLooping, L[Opts],[CountOrStopOnErrCode]
All Levels |: Rev 0001.0000, Overlay, BatchFileTerminator, |

Level 1 B: Rev 0001.0000, Overlay, BufferDisplay, B[DisplayBlk],[RefBlk],[NumBlks],[Opts],[SymBits]
Level 1 D: Rev 0001.0000, Flash, DisplayMemoryBlock, D[AddrHi],[AddrLo],[CompareValue],[NumBytes],[Opts]
Level 1 G: Rev 0001.0000, Overlay, GenericRwRequest, G[Parm0],[Parm1],[Parm2],...[Parm9]
Level 1 N: Rev 0001.0000, Overlay, SmartControl, N[SubCmd],[SubCmdParm0],[SubCmdParm1]
Level 1 S: Rev 0001.0000, Flash, EditProcessorMemoryByte, S[AddrHi],[AddrLo],[MemValue],[NumBytes],[Opts]
Level 1 U: Rev 0001.0000, Flash, EditBufferMemoryByte, U[AddrHi],[AddrLo],[MemValue],[NumBytes],[Opts]
Level 1 c: Rev 0001.0000, Overlay, BufferCompare, c[SrcBlk],[RefBlk],[NumBlks],[ContOnErr]
Level 1 e: Rev 0001.0000, Flash, SpinDownAndResetDrive, e[MsecDelay],[Opts]
Level 1 m: Rev 0001.0000, Flash, EditProcessorMemoryWord, m[AddrHi],[AddrLo],[MemValue],[NumBytes],[Opts]

Level 2 7: Rev 0001.0000, Overlay, WrVerifyChs, 7[Sec],[NumSecs],[WrBufBlk],[Opts]
Level 2 B: Rev 0001.0000, Overlay, BufferDisplay, B[DisplayBlk],[RefBlk],[NumBlks],[Opts],[SymBits]
Level 2 C: Rev 0001.0000, Overlay, BufferCopy, C[SrcBlk],[DestBlk],[NumBlks]
Level 2 E: Rev 0001.0000, Overlay, DisplayEditLog, E[LogNum],[ErrCodeOrSpecialFuncKey],[SpecialFunc]
Level 2 F: Rev 0001.0001, Overlay, Format, F[PSctr],[Action]
Level 2 H: Rev 0001.0000, Overlay, SelectHd, H[Hd],[SkType],[Options]
Level 2 I: Rev 0001.0000, Overlay, DisplayModifyAdaptiveParm, I[ParmValue],[GroupId],[ParmId],[P3],[P4],[P5],[P6],[UpdateOpts]
Level 2 K: Rev 0001.0000, Overlay, SetTrackingOffset, K[OffsetValue],[PersOrTempOpt],[UnitsOpt]
Level 2 M: Rev 0001.0000, Flash, SetDiagIdleMode, M[ModeSelect],[ModeMask],[ResetToPowerOn]
Level 2 O: Rev 0001.0000, Overlay, SeekFromCylToCyl, O[StartPhyCyl0],[StartPhyCyl1],[NumSkPairs],[NumSeconds],[Hd]
Level 2 P: Rev 0001.0000, Overlay, BufferSetPattern, P[PatternSelOrPatternLow],[PatternHi],[PatternBits],[Opts],[BlkNum],[NumBlks]
Level 2 Q: Rev 0001.0000, Overlay, WrRdRdChs, Q[Sec],[NumSecs],[DynamicSparingOpt],[PhyOpt],[Opts]
Level 2 R: Rev 0001.0000, Overlay, RdChs, R[Sec],[NumSecs],[DynamicSparingOpt],[PhyOpt],[Opts]
Level 2 S: Rev 0001.0001, Overlay, SkToLogCyl, S[Cyl],[Hd],[Offset],[OffsetUnitsOpt],[SkType],[Options]
Level 2 T: Rev 0001.0000, Overlay, MeasureThroughput, T[Opts],[MinSkew],[MaxSkew],[SkewStep]
Level 2 U: Rev 0001.0000, Flash, SpinUpDrive, U[HoldState],[Hd],[Cyl]
Level 2 V: Rev 0001.0000, Overlay, RdVerifyChs, V[Sec],[NumSecs],[CompareBlk],[Opts]
Level 2 W: Rev 0001.0000, Overlay, WrChs, W[Sec],[NumSecs],[DynamicSparingOpt],[PhyOpt],[Opts]
Level 2 X: Rev 0001.0000, Overlay, DisplayTrkSectorInfo, X[LogCyl],[Hd],[SysAreaOpt],[Opts],[RowsPerPage]
Level 2 Y: Rev 000A.0000, Overlay, SetDerpRetries, Y[Mode],[MaxRdRetries],[MaxWrtRetries],[OtcTLevel],[Options]
Level 2 Z: Rev 0001.0000, Flash, SpinDownDrive, Z
Level 2 c: Rev 0001.0000, Overlay, BufferCompare, c[SrcBlk],[RefBlk],[NumBlks],[ContOnErr]
Level 2 h: Rev 0001.0000, Overlay, XlatePhySec, h[Sec],[NumSecs]
Level 2 j: Rev 0002.0000, Overlay, RdWedge, j[WedgeAddr],[NumWedges],[NumSkipedWedges],[TranSize],[Opts],[RegAddr0],...,[RegAddr13]
Level 2 l: Rev 0001.0000, Overlay, XlateLogSec, q[Sec],[NumSecs]
Level 2 r: Rev 0001.0000, Overlay, RdLongOrSystemChs, r[LongSec],[LongSecsOrSysSec],[SysSecs],[LongPhySecOpt],[LongOpts],[SysOpts]
Level 2 s: Rev 0001.0000, Overlay, SkToPhyCyl, s[Cyl],[Hd],[ValidKey],[Offset],[OffsetUnitsOpt],[SkType],[Options]
Level 2 t: Rev 0001.0000, Overlay, XlateWedge, t[Wdg],[NumWdgs]
Level 2 u: Rev 0001.0000, Overlay, EnableDisableChannelPreampRegDisplay, u[EnableDisableOpt]
Level 2 v: Rev 0002.0000, Overlay, ConvertTrackPercentageToOffsetCount, v[Percentage]
Level 2 w: Rev 0001.0000, Overlay, WrLongOrSystemChs, w[LongSec],[LongSecsOrSysSec],[SysSecs],[LongPhySecOpt],,[SysOpts]
Level 2 x: Rev 0002.0000, Overlay, DisplayZoneInfo, x[Partition],[Hd],[Zone]
Level 2 y: Rev 0001.0000, Overlay, SetDerpRetryState, y[Type],[PathState],[RetryStateCnt],[LoopCnt1],[LoopCnt2]
Level 2 z: Rev 0002.0000, Overlay, WrWedge, z[WedgeAddr],[NumWedges],[NumSkipedWedges],[TranSize],[Opt],[RegAddr0],...,[RegAddr13]

Level 3 D: Rev 0001.0000, Overlay, MeasureSkAccessTime, D[SkLength],[SkType],[NumSks]
Level 3 E: Rev 0001.0000, Overlay, DisplayEditLog, E[LogNum],[ErrCodeOrSpecialFuncKey],[SpecialFunc]
Level 3 H: Rev 0001.0000, Overlay, SelectHd, H[Hd],[SkType],[Options]
Level 3 O: Rev 0001.0000, Overlay, SeekFromCylToCyl, O[StartPhyCyl0],[StartPhyCyl1],[NumSkPairs],[NumSeconds],[Hd]
Level 3 Q: Rev 0001.0000, Overlay, WrRdWrRdChs, Q[Sec],[NumSecs],[Opts]
Level 3 R: Rev 0001.0000, Overlay, ReadCurrentServoDestination, R
Level 3 S: Rev 0001.0001, Overlay, SkToLogCyl, S[Cyl],[Hd],[Offset],[OffsetUnitsOpt],[SkType],[Options]
Level 3 U: Rev 0001.0000, Flash, SpinUpDrive, U[HoldState],[Hd],[Cyl]
Level 3 V: Rev 0001.0000, Flash, RwPowerAsicReg, V[RegAddr],[RegValue],[WrOpt]
Level 3 Z: Rev 0001.0000, Flash, SpinDownDrive, Z
Level 3 f: Rev 0001.0000, Overlay, RealTimeServoTrace, f[SubCmd],[SubCmdParm0],[SubCmdParm1]
Level 3 p: Rev 0001.0000, Overlay, XlatePhySec, p[Sec],[NumSecs]
Level 3 q: Rev 0001.0000, Overlay, XlateLogSec, q[Sec],[NumSecs]
Level 3 s: Rev 0001.0000, Overlay, SkToPhyCyl, s[Cyl],[Hd],[ValidKey],[Offset],[OffsetUnitsOpt],[SkType],[Options]

Level 4 B: Rev 0001.0000, Overlay, EnableDisableRvff, B[NewRvffControlMode]
Level 4 D: Rev 0001.0000, Overlay, MeasureSkAccessTime, D[SkLength],[SkType],[NumSks]
Level 4 E: Rev 0001.0000, Overlay, DisplayEditLog, E[LogNum],[ErrCodeOrSpecialFuncKey],[SpecialFunc]
Level 4 H: Rev 0001.0000, Overlay, SelectHd, H[Hd],[SkType],[Options]
Level 4 K: Rev 0001.0000, Overlay, SetTrackingOffset, K[OffsetValue],[PersOrTempOpt],[UnitsOpt]
Level 4 O: Rev 0001.0000, Overlay, DisplayMicroJogForLogChs, O[LogCyl],[Hd],[Opts],[SysAreaOpt]
Level 4 S: Rev 0001.0001, Overlay, SkToLogCyl, S[Cyl],[Hd],[Offset],[OffsetUnitsOpt],[SkType],[Options]
Level 4 U: Rev 0001.0000, Overlay, ServoBatchTest, U[SubCmd],[SubCmdParm0],[SubCmdParm1],[SubCmdParm2]
Level 4 e: Rev 0001.0000, Overlay, EnableDisablePesOutput, e[PesLeftShiftCnt],[DisablePesOut]
Level 4 l: Rev 0001.0000, Overlay, ScanTrackForServoDefectsAndZap, l[RdPositionOpt]
Level 4 t: Rev 0001.0000, Overlay, DisplayModifyZapTable, t[EntryNum],[EntryValue]
Level 4 u: Rev 0001.0000, Overlay, SetSkSpeed, u[Opts],[SkSpeed]
Level 4 v: Rev 0001.0000, Overlay, ButterflySeekTest, v[StartPhyCyl0],[StartPhyCyl1],[NumSkPairs],[NumSeconds],[Hd]

Level 5 C: Rev 0001.0000, Overlay, GenericServoCmd, C[CmdNum],[Parm1],[Parm2],[Parm3],...[Parm7]
Level 5 D: Rev 0001.0000, Overlay, ReadUnlockDdrBuffer, B[OperateCode]
Level 5 G: Rev 0001.0000, Overlay, SelectServoController, G[Head],[Controller],[InputShift]
Level 5 R: Rev 0001.0000, Overlay, RdServoRamAtAddr, R[Addr],[NumBytes]
Level 5 S: Rev 0001.0000, Flash, EnterServoMatlabShell, S
Level 5 U: Rev 0001.0000, Overlay, EnableDisableServoUpdates, U[VcmDacUpdateOpt],[AToDUdateOpt]
Level 5 W: Rev 0001.0000, Overlay, WrServoRamAtAddr, W[Addr],[NumBytes],[Data]
Level 5 Z: Rev 0001.0000, Overlay, RdZapFromDiscToTable, Z
Level 5 d: Rev 0001.0000, Overlay, DisableEnableServoZap, d[ZapControlMode]
Level 5 i: Rev 0001.0000, Overlay, RdServoSymbolTableAtIndex, i[Index]
Level 5 r: Rev 0001.0000, Overlay, RdServoRamAtIndex, r[Index],[NumBytes],[ByteOffset]
Level 5 v: Rev 0000.0000, Overlay, GetServoVersion (Obsolete)
Level 5 w: Rev 0001.0000, Overlay, WrServoRamAtIndex, w[Index],[NumBytes],[Data],[ByteOffset]

Level 6 B: Rev 0001.0000, Overlay, RunBatchFile, B[BatchFileNum],[DisplayOpt]
Level 6 D: Rev 0001.0000, Overlay, DisplayBatchFile, D[BatchFileNum]
Level 6 E: Rev 0001.0000, Overlay, EnterBatchFile, E[BatchFileNum]

Level 7 B: Rev 0001.0000, Overlay, BufferDisplay, B[DisplayBlk],[RefBlk],[NumBlks],[Opts],[SymBits]
Level 7 C: Rev 0001.0000, Overlay, BufferCopy, C[SrcBlk],[DestBlk],[NumBlks]
Level 7 D: Rev 0001.0000, Overlay, DisplayTemperature, D,[DevSelect]
Level 7 E: Rev 0001.0000, Overlay, DisplayEditLog, E[LogNum],[ErrCodeOrSpecialFuncKey],[SpecialFunc]
Level 7 H: Rev 0001.0000, Overlay, SelectHd, H[Hd],[SkType],[Options]
Level 7 I: Rev 0001.0000, Overlay, DisplayModifyAdaptiveParm, I[ParmValue],[GroupId],[ParmId],[P3],[P4],[P5],[P6],[UpdateOpts]
Level 7 K: Rev 0001.0000, Overlay, SetTrackFormat, K[UserAreaTrkFormatType],[SysAreaTrkFormatType]
Level 7 P: Rev 0001.0000, Overlay, BufferSetPattern, P[PatternSelOrPatternLow],[PatternHi],[PatternBits],[Opts],[BlkNum],[NumBlks]
Level 7 Q: Rev 0001.0000, Overlay, WrRdRdChs, Q[Sec],[NumSecs],[DynamicSparingOpt],[PhyOpt],[Opts]
Level 7 R: Rev 0001.0000, Overlay, RdChs, R[Sec],[NumSecs],[DynamicSparingOpt],[PhyOpt],[Opts]
Level 7 S: Rev 0001.0001, Overlay, SkToLogCyl, S[Cyl],[Hd],[Offset],[OffsetUnitsOpt],[SkType],[Options]
Level 7 U: Rev 0001.0001, Overlay, ChannelTemperatureAdj, U[TweakTemperature],[Partition],[Hd],[Zone],[Opts]
Level 7 W: Rev 0001.0000, Overlay, WrChs, W[Sec],[NumSecs],[DynamicSparingOpt],[PhyOpt],[Opts]
Level 7 X: Rev 0001.0000, Overlay, DisplayPreampHdResistance, X
Level 7 Y: Rev 000A.0000, Overlay, SetDerpRetries, Y[Mode],[MaxRdRetries],[MaxWrtRetries],[OtcTLevel],[Options]
Level 7 Z: Rev 0001.0000, Flash, SpinDownDrive, Z
Level 7 b: Rev 0001.0000, Overlay, EraseTrk, b[AdjacentTrkCnt],[EraseCntPerTrk],[AcEraseOpt]
Level 7 c: Rev 0001.0000, Overlay, OffTrackCapability, c[Sec],[NumSecs],[SecIncrement],[Offset]
Level 7 h: Rev 0001.0000, Overlay, MarkMediaFlaw, f[PhyCyl],[Hd],[PhySec],[UndisturbedRadius],[EraseBandTrks],[PtrLen]
Level 7 i: Rev 0001.0000, Overlay, GenericRwRequest, i[Parm0],[Parm1],[Parm2],...[Parm9]
Level 7 m: Rev 0001.0001, Overlay, DOS, m[Flags],[StartLba],[EndLba],[MinCount]
Level 7 r: Rev 0001.0000, Overlay, RdNonVolatileAdaptiveParms, r[Opts]
Level 7 s: Rev 0001.0000, Flash, WrPeripheralReg, s[OpType],[RegAddr],[RegValue],[RegMask],[RegPagAddr]
Level 7 t: Rev 0001.0000, Flash, RdPeripheralReg, t[OpType],[RegAddr],[NumRegs],[RegMask],[RegPagAddr]
Level 7 u: Rev 0001.0000, Overlay, EnableDisableWrFault, u[Op]
Level 7 w: Rev 0001.0000, Overlay, WrNonVolatileAdaptiveParms, w[]
Level 7 x: Rev 0002.0000, Overlay, DisplayZoneInfo, x[Partition],[Hd],[Zone]
Level 7 y: Rev 0001.0000, Overlay, SetDerpRetryState, y[Type],[PathState],[RetryStateCnt],[LoopCnt1],[LoopCnt2]

Level 8 C: Rev 0001.0000, Overlay, ServoDiagSubCmds, C[SubCmd],[Parm0],[Parm1],[Parm2]
Level 8 R: Rev 0001.0000, Overlay, ReadCurrentServoDestination, R
Level 8 S: Rev 0001.0001, Overlay, SkToLogCyl, S[Cyl],[Hd],[Offset],[OffsetUnitsOpt],[SkType],[Options]
Level 8 U: Rev 0001.0000, Flash, SpinUpDrive, U[HoldState],[Hd],[Cyl]
Level 8 Z: Rev 0001.0000, Flash, SpinDownDrive, Z

Level 9 contains no valid commands

Level A C: Rev 0001.0000, Overlay, XlatePba, C[PbaHi],[PbaLow],[NumPbas]
Level A D: Rev 0001.0000, Overlay, XlateSfi, D[PhyCyl],[Hd],[Sfi],[NumSfis]
Level A E: Rev 0001.0000, Overlay, DisplayEditLog, E[LogNum],[ErrCodeOrSpecialFuncKey],[SpecialFunc]
Level A F: Rev 0001.0000, Overlay, XlateLba, F[LbaHi],[LbaLo],[SysAreaOpt],[NumLbas]
Level A M: Rev 0001.0000, Overlay, SetControllerTestPort, M[Port],[Value]
Level A P: Rev 0001.0000, Overlay, MergeAltListIntoSlipList, P
Level A Q: Rev 0001.0000, Overlay, WrRdRdLba, Q[Lba],[NumLbas],[Opts]
Level A R: Rev 0001.0000, Overlay, RdLba, R[Lba],[NumLbas],,[Opts]
Level A S: Rev 0001.0000, Overlay, SkToLba, S[LbaHi],[LbaLo],[Offset],[OffsetUnitsOpt],[SkType],[Options]
Level A W: Rev 0001.0000, Overlay, WrLba, W[Lba],[NumLbas],,[Opts]
Level A Y: Rev 000A.0000, Overlay, SetDerpRetries, Y[Mode],[MaxRdRetries],[MaxWrtRetries],[OtcTLevel],[Options]
Level A c: Rev 0001.0000, Overlay, XlateLllChs, c[Cyl],[Hd],[Sec],[SysAreaOpt],[NumSecs]
Level A d: Rev 0001.0000, Overlay, XlatePlpChs, d[Cyl],[Hd],[Sec],[NumSecs]
Level A f: Rev 0001.0000, Overlay, XlatePlpChw, f[Cyl],[Hd],[Wdg],[NumWdgs]
Level A l: Rev 0001.0000, Overlay, DisplayTrkInfo, l[LogCyl],[Hd],[SysAreaOpt],[Opts],[RowsPerPage]
Level A y: Rev 0001.0000, Overlay, SetDerpRetryState, y[Type],[PathState],[RetryStateCnt],[LoopCnt1],[LoopCnt2]

Level B contains no valid commands

Level C Q: Rev 0001.0000, Overlay, DisplayAsciiCmdInfo, Q[CmdLevel],[Cmd]
Level C T: Rev 0001.0000, Overlay, GoopPlot, T[Hd],[StartTrk],[EndTrk],[ECCLvl],[NoFrcSync]

Level D contains no valid commands

Level E B: Rev 0002.0000, Overlay, WrWedge, B[WedgeAddr],[NumWedges],[NumSkipedWedges],[TranSize],[Opt],[RegAddr0],...,[RegAddr13]
Level E C: Rev 0002.0000, Overlay, RdWedge, C[WedgeAddr],[NumWedges],[NumSkipedWedges],[TranSize],[Opts],[RegAddr0],...,[RegAddr13]
Level E m: Rev 0001.0000, Overlay, FastMseserMeasurement, m[]
Level E o: Rev 0001.0000, Overlay, FineRwOffset, o[NumAvgs],[TrkStepSize],[NumGuardTrks]
Level E w: Rev 0001.0000, Overlay, SlowWrChs, w[Sec],[NumSecs],[ConSec],[Skip],[UnitOfSkip]

Level F B: Rev 0001.0000, Overlay, BufferDisplay, B[DisplayBlk],[RefBlk],[NumBlks],[Opts],[SymBits]
Level F C: Rev 0001.0000, Overlay, BufferCopy, C[SrcBlk],[DestBlk],[NumBlks]
Level F D: Rev 0001.0000, Flash, DisplayMemoryBlock, D[AddrHi],[AddrLo],[CompareValue],[NumBytes],[Opts]
Level F P: Rev 0001.0000, Overlay, BufferSetPattern, P[PatternSelOrPatternLow],[PatternHi],[PatternBits],[Opts],[BlkNum],[NumBlks]
Level F U: Rev 0001.0000, Flash, SpinUpDrive, U[HoldState],[Hd],[Cyl]
Level F V: Rev 0001.0000, Overlay, BufferCompare, V[SrcBlk],[RefBlk],[NumBlks],[ContOnErr]
Level F Y: Rev 000A.0000, Overlay, SetDerpRetries, Y[Mode],[MaxRdRetries],[MaxWrtRetries],[OtcTLevel],[Options]
Level F Z: Rev 0001.0000, Flash, SpinDownDrive, Z
Level F b: Rev 0001.0000, Flash, SetBaudRate, b[BaudRate],[MsecDelay]
Level F r: Rev 0001.0000, Overlay, RdSystemChs, r[LogSec],[NumSecs],[Opts]
Level F s: Rev 0001.0000, Overlay, SkToPhyCyl, s[Cyl],[Hd],[ValidKey],[Offset],[OffsetUnitsOpt],[SkType],[Options]
Level F t: Rev 0001.0000, Flash, WrPeripheralReg, t[OpType],[RegAddr],[RegValue],[RegMask],[RegPagAddr]
Level F y: Rev 0001.0000, Overlay, SetDerpRetryState, y[Type],[PathState],[RetryStateCnt],[LoopCnt1],[LoopCnt2]
Level F z: Rev 0001.0000, Overlay, SataDebug, z[SubCmd],[Parm1],[Parm2],[Parm3]

Level G B: Rev 0001.0000, Overlay, FillCorrectionBuffer, B[StartAddr],[EndAddr],[Pattern],[Opts]
Level G C: Rev 0001.0000, Overlay, CopyCorrectionBuffer, C[SrcAddr],[DestAddr],[NumSyms]
Level G D: Rev 0001.0000, Overlay, DisplayCorrectionBuffer, D[StartAddr],[EndAddr],[CompareData]
Level G F: Rev 0001.0000, Overlay, FillSuperParityRam, F[StartAddr],[EndAddr],[Pattern]
Level G G: Rev 0001.0000, Overlay, DisplaySuperParityRam, G[StartAddr],[EndAddr]

Level H B: Rev 0001.0000, Overlay, BufferDisplay, B[DisplayBlk],[RefBlk],[NumBlks],[Opts],[SymBits]
Level H P: Rev 0001.0000, Overlay, BufferSetPattern, P[PatternSelOrPatternLow],[PatternHi],[PatternBits],[Opts],[BlkNum],[NumBlks]
Level H S: Rev 0001.0001, Overlay, SkToLogCyl, S[Cyl],[Hd],[Offset],[OffsetUnitsOpt],[SkType],[Options]

Level I S: Rev 0001.0000, Overlay, IntrinsicLogSk, S[Lba],[Offset],[Opts]
Level I l: Rev 0001.0000, Overlay, IntrinsicLockUnlock, l[Opts]
Level I s: Rev 0001.0000, Overlay, IntrinsicWrRdChannelReg, s[RegBank],[RegAddr],[Data]
Level I t: Rev 0001.0000, Overlay, IntrinsicRdRdChannelReg, t[RegBank],[RegAddr],[NumRegs]

Level L C: Rev 0001.0000, Overlay, CopyLogFile, C[SrcLog],[DestLog],[AppendOpt]
Level L D: Rev 0001.0000, Overlay, DisplayLogFile, D[Log],[ErrCode]
Level L E: Rev 0001.0000, Overlay, EnableDisableLogging, E[ErrLoggingOpt],[AsciiLoggingOpt],[RwStatsLoggingOpt]
Level L I: Rev 0001.0000, Overlay, DisplayLogFileInfo, I[Log]
Level L c: Rev 0001.0000, Overlay, CreateLogFile, c[Log],[LogType],[BufferOrDiskOpt],[NumBytes]
Level L d: Rev 0001.0000, Overlay, DeleteLogFile, d[Log]
Level L i: Rev 0001.0000, Overlay, InitLogFile, i[Log]

Level T B: Rev 0001.0000, Flash, SetBaudRate, B[BaudRate],[MsecDelay]
Level T E: Rev 0001.0000, Overlay, DisplayEditLog, E[LogNum],[ErrCodeOrSpecialFuncKey],[SpecialFunc]
Level T F: Rev 0001.0000, Overlay, SetCongenParmCmdHelpMsg, F[ValueRef],[Data],[ResetEnable]
Level T O: Rev 0001.0000, Overlay, SelectDataOutputMode, O[Mode],[VerboseOpts]
Level T P: Rev 0001.0000, Overlay, DownloadGenericFile, P[FileBytes]
Level T R: Rev 0001.0000, Overlay, RdNonVolatileAdaptiveParms, R[Opts]
Level T T: Rev 0001.0000, Overlay, OddEvenEncroachmentTest, T[strt tk],[end tk],[hd],[thrshold]
Level T V: Rev 0001.0000, Overlay, DisplayDefectLists, V[DefectListSelect],[Hd],[StartCyl],[NumCyls],[DisplaySummaryOpt]
Level T W: Rev 0001.0000, Overlay, WrNonVolatileAdaptiveParms, W[]
Level T [: Rev 0001.0000, Overlay, AsciiLogControl, [[LogFunction],[Log]
Level T i: Rev 0001.0000, Overlay, InitDefectList, i[DefectListSelect],[SaveListOpt],[ValidKey]
Level T m: Rev 0001.0000, Flash, FormatPartition, m[Partition],[FormatOpts],[DefectListOpts],[MaxWrRetryCnt],[MaxRdRetryCnt],[MaxEccTLevel],[MaxCertifyTrkRewrites],[ValidKey]
F3 C>

_________________
1Q9xrDTzTddUXeJAFRn37aqh1Yr6buDCdw - (Bitcoin Donations)
paypal.me/Spildit - (PayPal Donations)
The HDD Oracle - Platform for OPEN research on Data Recovery.


Top
 Profile  
 
 Post subject: Re: Seagate 7200.11 Terminal Commands :
PostPosted: April 14th, 2009, 14:14 
Offline

Joined: August 12th, 2008, 13:11
Posts: 3241
Location: USA
Are you going to be around to answer all the noob questions about terminal?

_________________
You don't have to backup all of your files, just the ones you want to keep.


Top
 Profile  
 
 Post subject: Re: Seagate 7200.11 Terminal Commands :
PostPosted: April 14th, 2009, 14:37 
Offline
User avatar

Joined: December 19th, 2006, 8:49
Posts: 10828
Location: Portugal
:)
I'm somekind of a noob too !
Just learning and sharing and having fun ;)
At the moment i've figured out how to download/upload firmware to the Seagate U family without expensive PC3k or equivalent tools and i'm having lots of fun with it.
I guess that now i have a better idea of how the firmware works. I've managed to figure out how to put the drive PCB on CERT mode, modify the key 01h module and run selfscan ! I know that all of you guys might be doing that all the time, difference is i'm not using PC3K or any other equivalent expensive tool :)

_________________
1Q9xrDTzTddUXeJAFRn37aqh1Yr6buDCdw - (Bitcoin Donations)
paypal.me/Spildit - (PayPal Donations)
The HDD Oracle - Platform for OPEN research on Data Recovery.


Top
 Profile  
 
 Post subject: Re: Seagate 7200.11 Terminal Commands :
PostPosted: April 14th, 2009, 17:11 
Offline

Joined: August 12th, 2008, 13:11
Posts: 3241
Location: USA
That's cool and I admire you for figuring things out on your own. The downside is that people who don't have any background at all are building terminal adapters all over the place because someone posted instructions and are executing terminal commands they don't understand and then coming here and posting about how to fix it.

_________________
You don't have to backup all of your files, just the ones you want to keep.


Top
 Profile  
 
 Post subject: Re: Seagate 7200.11 Terminal Commands :
PostPosted: April 16th, 2009, 4:59 
Offline
User avatar

Joined: May 5th, 2004, 20:06
Posts: 2814
Location: England
Splitdik Do you have your own company? Do you work for a data recovery company?

_________________
All went well until I plugged the drive in.


Top
 Profile  
 
 Post subject: Re: Seagate 7200.11 Terminal Commands :
PostPosted: April 16th, 2009, 5:00 
Offline
User avatar

Joined: May 5th, 2004, 20:06
Posts: 2814
Location: England
And I just want to say... NOT EVERYONE USES ACELABIA OR HORMONE REPLACEMENT THERAPY for recovery...


with the U6 series your about 7 years behind the game lol

_________________
All went well until I plugged the drive in.


Top
 Profile  
 
 Post subject: Re: Seagate 7200.11 Terminal Commands :
PostPosted: April 16th, 2009, 8:12 
Offline
User avatar

Joined: October 14th, 2005, 9:26
Posts: 915
Good!! :mrgreen:

_________________
Нет ничего невозможного


Top
 Profile  
 
 Post subject: Re: Seagate 7200.11 Terminal Commands :
PostPosted: April 16th, 2009, 12:26 
Offline
User avatar

Joined: December 19th, 2006, 8:49
Posts: 10828
Location: Portugal
Quote:
Do you work for a data recovery company?

No
Quote:
with the U6 series your about 7 years behind the game lol

I know that, best way to start is from the beginning.
Step by step.
If i can't speed up the learning and experiments ..... better for you ;)
So, why U6 Series ?
Because i'm starting to figure out exactly how this all thing works ... I don't have any teacher sitting nearby and most likely i will send many drives for the recycle bin ...
So, why spend lots of money on a 1.5TB drive, type something wrong and lose that money if i can start with $1 USD drives and get the feeling of what DR (at firmware level) is all about ?
When i'm confident that i know what i am doing and that i will not mess things up, i will catch you all !
By the way, i've started to learn DR on 2006 but i have to stop for a while because of big real life issues but if i can take some time to DR i'm pretty sure that i will be able to learn ;)
Of course, i also what to send a big thank you to all the ones that are helping me and giving small hints that i can use to learn !
See you ;)

_________________
1Q9xrDTzTddUXeJAFRn37aqh1Yr6buDCdw - (Bitcoin Donations)
paypal.me/Spildit - (PayPal Donations)
The HDD Oracle - Platform for OPEN research on Data Recovery.


Top
 Profile  
 
 Post subject: Re: Seagate 7200.11 Terminal Commands :
PostPosted: April 17th, 2009, 3:45 
Offline
User avatar

Joined: May 5th, 2004, 20:06
Posts: 2814
Location: England
why do you want to learn DR ?

If your thinking of starting a business your crazy .. why? because everything you learn or find you dump on forums :lol:

_________________
All went well until I plugged the drive in.


Top
 Profile  
 
 Post subject: Re: Seagate 7200.11 Terminal Commands :
PostPosted: April 17th, 2009, 12:26 
Offline
User avatar

Joined: December 19th, 2006, 8:49
Posts: 10828
Location: Portugal
Quote:
with the U6 series your about 7 years behind the game lol


This was posted TODAY, not 7 years ago.
LOL :D :D :D
security-enabled-t12000.html

_________________
1Q9xrDTzTddUXeJAFRn37aqh1Yr6buDCdw - (Bitcoin Donations)
paypal.me/Spildit - (PayPal Donations)
The HDD Oracle - Platform for OPEN research on Data Recovery.


Top
 Profile  
 
 Post subject: Re: Seagate 7200.11 Terminal Commands :
PostPosted: April 17th, 2009, 12:34 
Offline
User avatar

Joined: December 19th, 2006, 8:49
Posts: 10828
Location: Portugal
Quote:
why do you want to learn DR ?


Because i like a good chalange, because i don't have anything interesting to do, because i want to help people, be able to understand the data recovery.
If a motherboard dies, you buy another one, same as CPU, same as any other component.
If you buy another HDD but your preciose data is still inside the drive .... you know what will happen.

Quote:
If your thinking of starting a business your crazy .. why? because everything you learn or find you dump on forums


Why so many people go to stores to have a computer fix, like removing malware, replacing ram, etc ... if there are lots of detailed instruction about how to do that on the net ?
Will knowledge kill the DR buisness ? Of course not. Not everyone will study DR.
What will happen if the ones who really wish to learn can learn and became good DR people, is that they can charge less and prices will drop.
It's OK to charge money for DR when it's fair earned money, if you have to buy parts, replace HSA on cleanroom, etc ... its ok to charge for that, what is not Ok is to charge lots of money for a fix that you can do in 1 minute without any cost for you, like Seagate charging $2000 for recovering data on some 7200.11 drives that have failed because of the bug they were shipped with.
If only a small amount of people can do the fix, that small amont of people can charge $1500 and get some costumers, if people start to understand DR more people will be able to do the job at a decent price.

_________________
1Q9xrDTzTddUXeJAFRn37aqh1Yr6buDCdw - (Bitcoin Donations)
paypal.me/Spildit - (PayPal Donations)
The HDD Oracle - Platform for OPEN research on Data Recovery.


Top
 Profile  
 
 Post subject: Re: Seagate 7200.11 Terminal Commands :
PostPosted: April 17th, 2009, 12:44 
Offline
User avatar

Joined: May 5th, 2004, 20:06
Posts: 2814
Location: England
**** I hope you will just send him the commands to unlock that UX drive.... LOL

_________________
All went well until I plugged the drive in.


Top
 Profile  
 
 Post subject: Re: Seagate 7200.11 Terminal Commands :
PostPosted: April 17th, 2009, 12:51 
Offline
User avatar

Joined: December 19th, 2006, 8:49
Posts: 10828
Location: Portugal
The U6 i'm sure it will unlock fine because i've tested myself.
ATA Password and Locked drive will not lock you out of the terminal and will not prevent you from downloading/uploading modules in those U6 drives.

_________________
1Q9xrDTzTddUXeJAFRn37aqh1Yr6buDCdw - (Bitcoin Donations)
paypal.me/Spildit - (PayPal Donations)
The HDD Oracle - Platform for OPEN research on Data Recovery.


Top
 Profile  
 
 Post subject: Re: Seagate 7200.11 Terminal Commands :
PostPosted: April 17th, 2009, 12:54 
Offline
User avatar

Joined: May 5th, 2004, 20:06
Posts: 2814
Location: England
I could have told you that 7 years ago :lol: :lol: :lol: :shock: 8)

_________________
All went well until I plugged the drive in.


Top
 Profile  
 
 Post subject: Re: Seagate 7200.11 Terminal Commands :
PostPosted: April 17th, 2009, 12:59 
Offline
User avatar

Joined: December 19th, 2006, 8:49
Posts: 10828
Location: Portugal
The point is, it is still usefull information now !
People still buy 80 Gb drives on stores here at Portugal and still use them.

_________________
1Q9xrDTzTddUXeJAFRn37aqh1Yr6buDCdw - (Bitcoin Donations)
paypal.me/Spildit - (PayPal Donations)
The HDD Oracle - Platform for OPEN research on Data Recovery.


Top
 Profile  
 
 Post subject: Re: Seagate 7200.11 Terminal Commands :
PostPosted: April 17th, 2009, 15:05 
Offline
User avatar

Joined: May 5th, 2004, 20:06
Posts: 2814
Location: England
people still buy 20 MB drives you know. Anyway have a good weekend :D

_________________
All went well until I plugged the drive in.


Top
 Profile  
 
 Post subject: Re: Seagate 7200.11 Terminal Commands :
PostPosted: April 17th, 2009, 16:42 
Offline
User avatar

Joined: December 19th, 2006, 8:49
Posts: 10828
Location: Portugal
Good weekend for you too ;)

_________________
1Q9xrDTzTddUXeJAFRn37aqh1Yr6buDCdw - (Bitcoin Donations)
paypal.me/Spildit - (PayPal Donations)
The HDD Oracle - Platform for OPEN research on Data Recovery.


Top
 Profile  
 
 Post subject: Re: Seagate 7200.11 Terminal Commands :
PostPosted: June 3rd, 2009, 4:42 
Offline

Joined: September 30th, 2005, 7:33
Posts: 678
What about the Terminal Commands of other Seagate drive families?
Any easy way to find them out, or links?...


Top
 Profile  
 
 Post subject: Re: Seagate 7200.11 Terminal Commands :
PostPosted: June 3rd, 2009, 17:54 
Offline
User avatar

Joined: December 19th, 2006, 8:49
Posts: 10828
Location: Portugal
BGman wrote:
What about the Terminal Commands of other Seagate drive families?
Any easy way to find them out, or links?...


PC3K Manual.

_________________
1Q9xrDTzTddUXeJAFRn37aqh1Yr6buDCdw - (Bitcoin Donations)
paypal.me/Spildit - (PayPal Donations)
The HDD Oracle - Platform for OPEN research on Data Recovery.


Top
 Profile  
 
 Post subject: Re: Seagate 7200.11 Terminal Commands :
PostPosted: June 4th, 2009, 4:31 
Offline

Joined: September 30th, 2005, 7:33
Posts: 678
Spildit wrote:
BGman wrote:
What about the Terminal Commands of other Seagate drive families?
Any easy way to find them out, or links?...


PC3K Manual.



Which one?
This is what I got:
PCSeagBara_rev_Xhinn.pdf

Anything newer or better?


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 24 posts ]  Go to page 1, 2  Next

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group