All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 31 posts ]  Go to page Previous  1, 2
Author Message
 Post subject: Re: WD10JMVW 2.5 usb - connect sata adapter
PostPosted: November 23rd, 2018, 18:08 
Offline
User avatar

Joined: June 16th, 2018, 12:09
Posts: 14
Location: Turkey
Spildit wrote:
HddDonorMarket wrote:

U12 chip swap from 2060-771961 USB pcb to 2060-771960 Sata Pcb



If you do this and if you then plug the SATA PCB to MRT port and run it can you access the modules on the drive by MRT Utility ?


I cannot see. I don't know why. I afraid to make wrong thing and lost data. And again swap to original PCB. There are 700 Gb data in hdd. I am recovering in slow motion )). 120 gb 1 week. Customer need especially 150 gb important data. I will try again when I get 150 gb important part.

My guess I could make better I read some more articles about this kind HDD. I hope I would


Top
 Profile  
 
 Post subject: Re: WD10JMVW 2.5 usb - connect sata adapter
PostPosted: November 23rd, 2018, 18:10 
Online
User avatar

Joined: December 19th, 2006, 8:49
Posts: 9985
Location: Portugal
HddDonorMarket wrote:
(...) I am recovering in slow motion )). 120 gb 1 week. Customer need especially 150 gb important data. I will try again when I get 150 gb important part.


Better send drive to someone who knows what he/she is doing ...

You might end up killing head(s) this way ... Or get damaged data ... Or .... Kill the drive for good ...

_________________
1Q9xrDTzTddUXeJAFRn37aqh1Yr6buDCdw - (Bitcoin Donations)
paypal.me/Spildit - (PayPal Donations)
The HDD Oracle - Platform for OPEN research on Data Recovery.


Top
 Profile  
 
 Post subject: Re: WD10JMVW 2.5 usb - connect sata adapter
PostPosted: November 26th, 2018, 16:21 
Offline
User avatar

Joined: June 16th, 2018, 12:09
Posts: 14
Location: Turkey
Spildit wrote:
HddDonorMarket wrote:
(...) I am recovering in slow motion )). 120 gb 1 week. Customer need especially 150 gb important data. I will try again when I get 150 gb important part.


Better send drive to someone who knows what he/she is doing ...

You might end up killing head(s) this way ... Or get damaged data ... Or .... Kill the drive for good ...


I got 240 gb recover in slow mode. Will end tomorrow. And I am free to try some experience with this drive. ))


Top
 Profile  
 
 Post subject: Re: WD10JMVW 2.5 usb - connect sata adapter
PostPosted: November 26th, 2018, 16:35 
Online
User avatar

Joined: December 19th, 2006, 8:49
Posts: 9985
Location: Portugal
Ok !!! Cool !!! Let us know when you do get your data recovered !

_________________
1Q9xrDTzTddUXeJAFRn37aqh1Yr6buDCdw - (Bitcoin Donations)
paypal.me/Spildit - (PayPal Donations)
The HDD Oracle - Platform for OPEN research on Data Recovery.


Top
 Profile  
 
 Post subject: Re: WD10JMVW 2.5 usb - connect sata adapter
PostPosted: November 27th, 2018, 17:07 
Offline
User avatar

Joined: June 16th, 2018, 12:09
Posts: 14
Location: Turkey
% 100 recovery fast speed.


I finished important data recovery . 250 gb in 15 days.

And customer allow to get risk .

Then
In 15 min I solved this case. Lol. my 1st professional case with MRT .

Hot bios swap to
1 TB usb 3 2060 771961 001 RevA WD10JMVW 11AJGS1
1 TB Sata 2060 771960 000 RevA WD10JPVX 22JC3T0
Isolate PCB preamp pins
Power on
Disable 411
power of
Remove isolate and screw PCB
power on
Solve slow responding
Power of power on
Enable 411
Power of on
And DE .

Perfect transfer rate .
)


**I do not remember exactly whenj I did screw again PCB . I write as I remember.
I don't use LDR as someone said before

And there is no 5C in module list. I checked module list in hdd after repair.
I San see all of SA modules fine. HDD some bad sectors. But allow to recover 140 mbs


Attachments:
20181128_000552.jpg
20181128_000552.jpg [ 349.41 KiB | Viewed 729 times ]
20181128_000731.jpg
20181128_000731.jpg [ 377.52 KiB | Viewed 729 times ]
20181128_000707.jpg
20181128_000707.jpg [ 374.47 KiB | Viewed 729 times ]
Top
 Profile  
 
 Post subject: Re: WD10JMVW 2.5 usb - connect sata adapter
PostPosted: November 27th, 2018, 17:41 
Online
User avatar

Joined: December 19th, 2006, 8:49
Posts: 9985
Location: Portugal
Cool !!!!

You would had saved a huge amount of time if you had done that to start with ...

_________________
1Q9xrDTzTddUXeJAFRn37aqh1Yr6buDCdw - (Bitcoin Donations)
paypal.me/Spildit - (PayPal Donations)
The HDD Oracle - Platform for OPEN research on Data Recovery.


Top
 Profile  
 
 Post subject: Re: WD10JMVW 2.5 usb - connect sata adapter
PostPosted: November 28th, 2018, 5:20 
Offline
User avatar

Joined: June 16th, 2018, 12:09
Posts: 14
Location: Turkey
Spildit wrote:
HddDonorMarket wrote:

U12 chip swap from 2060-771961 USB pcb to 2060-771960 Sata Pcb



If you do this and if you then plug the SATA PCB to MRT port and run it can you access the modules on the drive by MRT Utility ?



True.
And with ATA . Not used com connection
I but not directly. I saw modules after some steps. I don't remember when I see after which step. (Guess after blocking 411 )

I have 2 hdd has same PCB number. I tried another one before I guess. So it wasn't work before as last one


I will try to demonstrate again after recover all data. I will record steps to help me future .
Last trying


Top
 Profile  
 
 Post subject: Re: WD10JMVW 2.5 usb - connect sata adapter
PostPosted: November 28th, 2018, 8:55 
Online
User avatar

Joined: December 19th, 2006, 8:49
Posts: 9985
Location: Portugal
Ok ! Have fun !

_________________
1Q9xrDTzTddUXeJAFRn37aqh1Yr6buDCdw - (Bitcoin Donations)
paypal.me/Spildit - (PayPal Donations)
The HDD Oracle - Platform for OPEN research on Data Recovery.


Top
 Profile  
 
 Post subject: Re: WD10JMVW 2.5 usb - connect sata adapter
PostPosted: Yesterday, 18:49 
Offline

Joined: Yesterday, 18:37
Posts: 2
Location: Poland
Hi everyone.
I'm stuck with problem like this. I have WD10JMVW with USB 3.0.
Via USB device menager sometimes shows it as WD MY PASSPORT 0820, but most of time it's just unvisible.
Head and motor are working almost fine. There is wired buzzing when work but i hear head trying to "read data". It's not stuck in pads i'm sure.

I tried to solder cables for sata conection ... and here it is.
I have everthing prepared but mobo its also not see this drive in BIOS so... question is witch resistors i have to resolder to SATA lines ?
I'll be grateful for any help.

Thanks guy's.

data-medics wrote:
There is no adapter per se. The conversion from SATA to USB is all built into the drive. There are two resistors that you can generally remove and solder into the SATA lanes if you must do it that way. However, it's generally easier to just transfer the ROM or ROM code to a matched SATA board. I've been keeping an updated list of compatible SATA boards on this thread: https://www.data-medics.com/forum/wd-pa ... e-t13.html

However, you'll likely find that by bypassing the USB bridge the data will be encrypted. So you'll need to have a method for handling the encryption afterward.


Top
 Profile  
 
 Post subject: Re: WD10JMVW 2.5 usb - connect sata adapter
PostPosted: Today, 7:14 
Offline

Joined: Yesterday, 18:37
Posts: 2
Location: Poland
Witch resistors ?


data-medics wrote:
There is no adapter per se. The conversion from SATA to USB is all built into the drive. There are two resistors that you can generally remove and solder into the SATA lanes if you must do it that way. However, it's generally easier to just transfer the ROM or ROM code to a matched SATA board. I've been keeping an updated list of compatible SATA boards on this thread: https://www.data-medics.com/forum/wd-pa ... e-t13.html

However, you'll likely find that by bypassing the USB bridge the data will be encrypted. So you'll need to have a method for handling the encryption afterward.


Top
 Profile  
 
 Post subject: Re: WD10JMVW 2.5 usb - connect sata adapter
PostPosted: Today, 10:09 
Offline

Joined: December 8th, 2010, 11:37
Posts: 600
Location: Ottawa, Canada
zamach132 wrote:
Witch resistors ?

Data-Medics already showed you, here. They are capacitors, not resistors, by the way.

_________________
Sabo Computer Repairs & Data Recovery


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 31 posts ]  Go to page Previous  1, 2

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: Spildit and 8 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group