All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 6 posts ] 
Author Message
 Post subject: Model: TOSHIBA MQ01ABD100M ( G-list Error )
PostPosted: September 10th, 2018, 5:59 
Offline

Joined: September 10th, 2018, 5:48
Posts: 2
Location: India
Toshiba 2.5" 1TB

G-List Error

Smart Cleared
G-List Clear Error

User Sector Error, Any Help or suggestion?



Selected family:MQ01ABD
Model:TOSHIBA MQ01ABD100M

Load Zones : .........................:OK
Cyl Num : ............................:215669
Head Num : ...........................:4
Vendor : .............................:TOSHIBA
Model : ..............................:MQ01ABD100
Microcode : ..........................:AXG01UA9

G-List Reading : .....................:Err

CP list:33,34,44,56,92,95,98,9A,9C,A2,A5,A7,A8,A9,AA,AD,AE,B1,B3,BB,BF,C1,C5,C6,C7,C8,C9,CB,CD,D0,D1,D3,D4,D6,D7,D9,DA,DB,DC,DD,EF,F1,F3,F4,F7,F8,FA,FB,FC,FF

Saving CP module......
Save to folder:C:\UserDataFile\Toshiba\MQ01ABD\20180910-144718\Data\CP\

33 : .................................:Err
34 : .................................:Err
44 : .................................:Err
56 : .................................:Err
92 : .................................:Err
95 : .................................:Err
98 : .................................:OK
9A : .................................:OK
9C : .................................:OK
A2 : .................................:OK
A5 : .................................:OK
A7 : .................................:OK
A8 : .................................:OK
A9 : .................................:OK
AA : .................................:OK
AD : .................................:OK
AE : .................................:OK
B1 : .................................:OK
B3 : .................................:OK
BB : .................................:OK
BF : .................................:Err
C1 : .................................:Err
C5 : .................................:Err
C6 : .................................:Err
C7 : .................................:Err
C8 : .................................:Err
C9 : .................................:Err
CB : .................................:Err
CD : .................................:Err
D0 : .................................:Err
D1 : .................................:Err
D3 : .................................:Err
D4 : .................................:OK
D6 : .................................:OK
D7 : .................................:OK
D9 : .................................:OK
DA : .................................:OK
DB : .................................:OK
DC : .................................:OK
DD : .................................:Err
EF : .................................:Err
F1 : .................................:Err
F3 : .................................:Err
F4 : .................................:Err
F7 : .................................:Err
F8 : .................................:Err
FA : .................................:Err
FB : .................................:Err
FC : .................................:Err
FF : .................................:Err

CP Saving module is ok!


Attachments:
Toshiba 2.5.PNG
Toshiba 2.5.PNG [ 29.34 KiB | Viewed 381 times ]
Top
 Profile  
 
 Post subject: Re: Model: TOSHIBA MQ01ABD100M ( G-list Error )
PostPosted: September 10th, 2018, 16:58 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 10776
Location: Australia
Can you upload the resources, including a ROM and track dump?

I suspect that most of the CP errors are bugs in your tool.

_________________
A backup a day keeps DR away.


Top
 Profile  
 
 Post subject: Re: Model: TOSHIBA MQ01ABD100M ( G-list Error )
PostPosted: September 10th, 2018, 18:16 
Offline
User avatar

Joined: July 12th, 2010, 4:38
Posts: 1075
Location: Portugal
I think the problem should be no accessing SA/Data area. Probably bad heads or media damage, since he can only read CP from PCB and nothing from SA...

_________________
http://www.facebook.com/PCLAB.Assistencia.Tecnica
ACELab partner


Top
 Profile  
 
 Post subject: Re: Model: TOSHIBA MQ01ABD100M ( G-list Error )
PostPosted: September 11th, 2018, 7:43 
Offline

Joined: September 10th, 2018, 5:48
Posts: 2
Location: India
Track 1 damaged, need to read it first, than write it to repair the logical damage.


Top
 Profile  
 
 Post subject: Re: Model: TOSHIBA MQ01ABD100M ( G-list Error )
PostPosted: September 11th, 2018, 16:30 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 10776
Location: Australia
pclab wrote:
I think the problem should be no accessing SA/Data area. Probably bad heads or media damage, since he can only read CP from PCB and nothing from SA...

There are several "Err" CPs which are ROM resident, eg 33, 92, 95. I believe these "errors" are due to a bug in the tool rather than a damaged ROM. A ROM dump would enable us to confirm this. In any case these false errors are obfuscating the real problem.

_________________
A backup a day keeps DR away.


Top
 Profile  
 
 Post subject: Re: Model: TOSHIBA MQ01ABD100M ( G-list Error )
PostPosted: September 11th, 2018, 18:21 
Offline
User avatar

Joined: July 12th, 2010, 4:38
Posts: 1075
Location: Portugal
MRT does that even on healthy drives, so I don't care it too much.

_________________
http://www.facebook.com/PCLAB.Assistencia.Tecnica
ACELab partner


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 0 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group