All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 10 posts ] 
Author Message
 Post subject: ST3320820A mrt adaptor for terminal ?
PostPosted: November 10th, 2018, 5:01 
Offline

Joined: September 14th, 2018, 13:41
Posts: 51
Location: italy
hi guys, I can not find the right adapter to connect the serial to this HDD, if I try those called seagate do not enter because the holes are too small. How can I connect this disk to MRT? Thank you


Top
 Profile  
 
 Post subject: Re: ST3320820A mrt adaptor for terminal ?
PostPosted: November 10th, 2018, 10:16 
Offline
User avatar

Joined: February 9th, 2009, 16:13
Posts: 2090
Location: Ontario, Canada
I don't believe MRT supplies a terminal adapted for Seagate IDE drives. You will likely need to connect tx/rx via jumper wires. Just don't expect great support for older drives.

_________________
Luke
RAID Data Recovery


Top
 Profile  
 
 Post subject: Re: ST3320820A mrt adaptor for terminal ?
PostPosted: November 10th, 2018, 16:06 
Offline
User avatar

Joined: December 19th, 2006, 8:49
Posts: 9828
Location: Portugal
7200.10 .... If MRT doesn't support those drives SeDiv for Seagate does work really nice with them !

Terminal adaptor itself should work just fine, just connect by wires to the tx/rx jumpers of the drive ...

http://www.hddoracle.com/viewtopic.php?f=6&t=193

Or just buy something like this ....

http://www.hddoracle.com/viewtopic.php?f=46&t=192

_________________
1Q9xrDTzTddUXeJAFRn37aqh1Yr6buDCdw - (Bitcoin Donations)
paypal.me/Spildit - (PayPal Donations)
The HDD Oracle - Platform for OPEN research on Data Recovery.


Top
 Profile  
 
 Post subject: Re: ST3320820A mrt adaptor for terminal ?
PostPosted: November 11th, 2018, 8:02 
Offline

Joined: September 14th, 2018, 13:41
Posts: 51
Location: italy
Thankyou, i try tomorrow to connect to mrt com interface with you schematics . Thankyou


Top
 Profile  
 
 Post subject: Re: ST3320820A mrt adaptor for terminal ?
PostPosted: November 11th, 2018, 14:31 
Offline
User avatar

Joined: June 17th, 2018, 11:43
Posts: 253
Location: spain
Be very careful with the RS232 adapter from MRTLAB, it has given me a lot of problems with some SEAGATE families, for others I have not had any problems.

I show you what I have to communicate by TERMINAL with the seagate and the 2.5 "old IDES.

I can assure you that it works very well, but you have to do a bit of DIY. Also, although it's silly, I pass you by as I have the adapters of the MRTLAB, which lost a lot of time looking for the appropriate one and how to place it.

Greetings.


Attachments:
IMG_20181111_192954[1].jpg
IMG_20181111_192954[1].jpg [ 1.9 MiB | Viewed 167 times ]

_________________
Is Earth an intelligent being?
Top
 Profile  
 
 Post subject: Re: ST3320820A mrt adaptor for terminal ?
PostPosted: November 11th, 2018, 15:57 
Offline

Joined: September 14th, 2018, 13:41
Posts: 51
Location: italy
I realize that mrt has many problems and bugs. After all, you can not always be successful, but it slowly makes its way. I'll see tomorrow to connect with some pins, I also have a TTL serial I'll do some tests with that too. Let's see what happens. Thank you


Top
 Profile  
 
 Post subject: Re: ST3320820A mrt adaptor for terminal ?
PostPosted: November 11th, 2018, 16:13 
Offline
User avatar

Joined: December 19th, 2006, 8:49
Posts: 9828
Location: Portugal
This is what i still use most of the times :

Attachment:
1.jpg
1.jpg [ 422.26 KiB | Viewed 149 times ]


COM port version of TTL adaptor + PC-3000 adaptor for 2.5 drives when needed.

You just plug the TTL directly to the drives unless you do use a 2.5 drive and on that case you use PC-3000 TTL adaptor + 2.5 IDE adaptor or you plug the COM PORT TTL on the PC-3000 adaptor.

_________________
1Q9xrDTzTddUXeJAFRn37aqh1Yr6buDCdw - (Bitcoin Donations)
paypal.me/Spildit - (PayPal Donations)
The HDD Oracle - Platform for OPEN research on Data Recovery.


Top
 Profile  
 
 Post subject: Re: ST3320820A mrt adaptor for terminal ?
PostPosted: November 12th, 2018, 0:36 
Offline
User avatar

Joined: June 26th, 2014, 4:41
Posts: 58
Location: China
We once provided our customers with the adaptor specialized for seagate u5 series for a period,somehow u5 series gradually became rare on the market,whereas f3 series was getting more and more popular. So hdd repairing engineers now require more f3 adaptors than u5 ones due to wear and tear of the component. For this reason we add one more f3 in the pack where we correspondingly take out one adaptor used for u5. We did it because samsung adaptor is also compatible with seagate u5 series


Attachments:
forum.jpg
forum.jpg [ 282.75 KiB | Viewed 122 times ]

_________________
MRT Lab - Your data recovery, our committed solution.
http://en.mrtlab.com/
Top
 Profile  
 
 Post subject: Re: ST3320820A mrt adaptor for terminal ?
PostPosted: Yesterday, 5:53 
Offline

Joined: September 14th, 2018, 13:41
Posts: 51
Location: italy
mrtlabinfo wrote:
We once provided our customers with the adaptor specialized for seagate u5 series for a period,somehow u5 series gradually became rare on the market,whereas f3 series was getting more and more popular. So hdd repairing engineers now require more f3 adaptors than u5 ones due to wear and tear of the component. For this reason we add one more f3 in the pack where we correspondingly take out one adaptor used for u5. We did it because samsung adaptor is also compatible with seagate u5 series


Hi mrt, this adaptor don't work for this disk i have solved in this mode.
Thanks to all


Attachments:
IMG_20181113_104633.jpg
IMG_20181113_104633.jpg [ 2.23 MiB | Viewed 65 times ]
IMG_20181113_104645.jpg
IMG_20181113_104645.jpg [ 2.66 MiB | Viewed 65 times ]
Top
 Profile  
 
 Post subject: Re: ST3320820A mrt adaptor for terminal ?
PostPosted: Yesterday, 18:52 
Offline
User avatar

Joined: December 19th, 2006, 8:49
Posts: 9828
Location: Portugal
Cool !
:D

_________________
1Q9xrDTzTddUXeJAFRn37aqh1Yr6buDCdw - (Bitcoin Donations)
paypal.me/Spildit - (PayPal Donations)
The HDD Oracle - Platform for OPEN research on Data Recovery.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 10 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group