It is currently April 24th, 2014, 20:03

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 38 posts ]  Go to page 1, 2  Next
Author Message
 Post subject: HDD repair 2.0 ENG
PostPosted: March 9th, 2007, 9:05 
Offline

Joined: January 15th, 2007, 19:03
Posts: 9
hi to all

can someone tell me if this program is for pata drives only. i heave sata drive that this program doesent reckognise at all. if there is a setting for this program to enable sata drive please share it with me.


Top
 Profile  
 
 Post subject:
PostPosted: March 10th, 2007, 14:25 
Offline

Joined: November 29th, 2006, 10:08
Posts: 5154
Location: UK
Are you running it directly from the SATA port on your mainboard?

If so, I think HDD repair only work off IDE. So you will need to run your SATA drive through a IDE>SATA adaptor.

Sean


Top
 Profile  
 
 Post subject:
PostPosted: March 11th, 2007, 3:44 
Offline

Joined: June 27th, 2006, 11:33
Posts: 2281
Location: In ur HDD !
but i think sata drives have different firmware structure then that of ide so i think it will not work on sata drives .


Top
 Profile  
 
 Post subject:
PostPosted: April 27th, 2007, 4:48 
Offline

Joined: April 27th, 2007, 4:07
Posts: 32
i agree with u mr.sean u r right


Top
 Profile  
 
 Post subject: Re: HDD repair 2.0 ENG
PostPosted: January 1st, 2008, 21:26 
Offline

Joined: October 21st, 2007, 8:48
Posts: 756
Location: Egypt
can u give me the (hdd repair 2.0 eng) URL please ?

_________________
A fool with a tool is still a fool.


Top
 Profile  
 
 Post subject: Re: HDD repair 2.0 ENG
PostPosted: June 23rd, 2008, 16:20 
Offline

Joined: February 15th, 2006, 3:38
Posts: 1025
Location: canada
its only for ide not sata


Top
 Profile  
 
 Post subject: Re: HDD repair 2.0 ENG
PostPosted: June 24th, 2008, 3:00 
Offline

Joined: January 8th, 2008, 5:21
Posts: 590
Location: uk
Does this programme actually repair anything?


Top
 Profile  
 
 Post subject: Re: HDD repair 2.0 ENG
PostPosted: June 24th, 2008, 13:02 
Offline

Joined: June 27th, 2006, 11:33
Posts: 2281
Location: In ur HDD !
yes its a good freeware utility for repairing maxtor and WD firmware .


Top
 Profile  
 
 Post subject: Re: HDD repair 2.0 ENG
PostPosted: June 26th, 2008, 1:51 
Offline

Joined: February 15th, 2006, 3:38
Posts: 1025
Location: canada
i got this program but not sure where to get the data lead
you connect up to use it

any ideas

cheers


Top
 Profile  
 
 Post subject: Re: HDD repair 2.0 ENG
PostPosted: June 29th, 2008, 18:41 
Offline
User avatar

Joined: March 28th, 2008, 7:52
Posts: 1479
Location: Europe, Hungary
Hi, gurus

I have one error-free and data-free donor drive, NAR61HA0, and playing with HDD repair 1.1, i have made this to NAR61HAZ. :mrgreen:

Is there a way, to fix this kind or error with 2.0 version?
The drive has ARDENT cpu, but the hdd repair shows only DSP and POKER.

Can somebody help me a little?

Thanks,
Janos


Top
 Profile  
 
 Post subject: Re: HDD repair 2.0 ENG
PostPosted: June 30th, 2008, 9:37 
Offline

Joined: June 27th, 2006, 11:33
Posts: 2281
Location: In ur HDD !
Ardent = poker .


Top
 Profile  
 
 Post subject: Re: HDD repair 2.0 ENG
PostPosted: July 11th, 2008, 3:28 
Offline

Joined: February 15th, 2006, 3:38
Posts: 1025
Location: canada
so can anyone tell me where to get the data lead that you connect up to the test pins on hard drive :(


Top
 Profile  
 
 Post subject: Re: HDD repair 2.0 ENG
PostPosted: July 15th, 2008, 8:49 
Offline
User avatar

Joined: October 14th, 2005, 9:26
Posts: 757
can u give me the (hdd repair 2.0 eng) URL please ?
:vo:

I want to test it!

_________________
Нет ничего невозможного


Top
 Profile  
 
 Post subject: Re: HDD repair 2.0 ENG
PostPosted: July 26th, 2008, 9:44 
Offline
User avatar

Joined: March 28th, 2008, 7:52
Posts: 1479
Location: Europe, Hungary
Hello

Somebody have a loader for this model?

6E020L0510231, K,G,G,A, B8FEA

I have already tryd all the loader i have including the one 6E020L on the files in forum, but no one works for me. :(
Additionally i forget to build own loader for this drive, and now i can't make it alive again...

Thank you for all who want to help me,

Regards,
Janos


Top
 Profile  
 
 Post subject: Re: HDD repair 2.0 ENG
PostPosted: August 26th, 2008, 19:11 
Offline

Joined: August 16th, 2008, 18:42
Posts: 8
Hi, Someone has a loader, ram, rom, modules everything needed for fixing with HDD repair 2.0 ENG this Maxtor hdd, I think the above has to be extracted with this software and not with pc-3000.

model 4d04h2
hda 22a
pcba 09a
unique P1a
code DAK019k0
c2
4d040h22209P1 3902B679

K,G,C,B

Poker C.3 CPU
-----------------------------------------------------------------------------------------

It is detected in safe mode as: Maxtor ROMULUS F/W DAK03OKZ (should be DAK019K0?)
Also, this software gives me a message:Found:8c0 Mods

Rodrigo


Top
 Profile  
 
 Post subject: Re: HDD repair 2.0 ENG
PostPosted: December 17th, 2008, 13:27 
Offline

Joined: October 13th, 2006, 10:35
Posts: 21
Hi ! I too have a failed 40 Giga Maxtor Diamond Plus 8 (Ardent; NAR61590 K,M,C,A ; 6E040L0510605). Would the free program HDDRepair, as advertised on this thread, rewrite the firmware ? ... I can't find instructions for using the program, or downloading firmware modules (are they built-in ?) - can someone charitable help just a little ?

I read the FAQs and many threads, and I do understand people who make a living out of HD repairs cannot give out all their secrets, BUT, I can't afford professional recovery by any means either. I'm all willing to try this software, HDDrepair, on the disk (it's toast anyway).

Thank you all and n particular, Maysoft for their patience and dedication.

--
Czerno


Top
 Profile  
 
 Post subject: Re: HDD repair 2.0 ENG
PostPosted: December 17th, 2008, 17:22 
Offline

Joined: October 13th, 2006, 10:35
Posts: 21
And special thanks to M. Rameez...
--
Czerno


Top
 Profile  
 
 Post subject: Re: HDD repair 2.0 ENG
PostPosted: January 3rd, 2009, 19:35 
Offline

Joined: May 14th, 2008, 10:50
Posts: 1
http://kwar.vndv.com/workshop.html


Top
 Profile  
 
 Post subject: Re: HDD repair 2.0 ENG
PostPosted: January 11th, 2009, 10:52 
Offline

Joined: January 10th, 2009, 3:31
Posts: 39
Hi All,

I am in between very similar problem, does any body know how to use this software.

Thanks,


Top
 Profile  
 
 Post subject: Re: HDD repair 2.0 ENG
PostPosted: May 6th, 2009, 4:36 
Offline

Joined: March 4th, 2009, 20:43
Posts: 89
Location: hungary
Hi all!

What is the function of the 'Alloc' botton of this software?
I tried to guess it, but I am not sure...

Thanks


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 38 posts ]  Go to page 1, 2  Next

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group