Analysing Flash.bin ...

Searching for LDSCs and verifying PCMBlocks ...

LDSC   LDSC    Att   PCMBlock          RAM         size      PCMBlk CS
Start  ID CS        Start -  End     address     RAM / ROM    Exp/Act
---------------------------------------------------------------------------
    0  5A 27   04     120 -  1648      19000     1528  1528    E7   E7   OK
   20  01 62   01    1649 -  9855          0 c   A538  820C    04   04   OK
   40  02 46   01    9856 -  DDD6       EA24 c   6550  4580    BA   BA   OK
   60  03 0B   01    DDD7 -  E5AB      16788 c    99C   7D4    1F   1F   OK
   80  04 5E   03    E5AC -  E7D4    4000068 c    2FC   228    C2   C2   OK
   A0  05 D3   03    E7D5 -  EEBD    4003EA4 c    D38   6E8    90   90   OK
   C0  06 CB   03    EEBE - 1090A   24000008 c   2EE8  1A4C    6B   6B   OK
   E0  07 02   01   1090B - 2591F   24019E00 c  1AFA0 15014    62   62   OK
  100  08 F1   01   25920 - 2CE00   24036A00 c   9494  74E0    74   74   OK

LDSC   = PM Loader Config String (32 bytes)
ID     = ID byte of LDSC (byte #0)
CS     = Checksum byte or word
Att    = Attributes
PCMBlk = Program Code Memory Block
Exp    = Expected checksum for PCMBLock
Act    = Actual checksum for PCMBLock
c      = compressed PCMBlock
size   = size of decompressed (in RAM) and compressed (in ROM) PCMBlock in bytes


ROYL directory module 0x000B found at 0x2FEE1

Active directory flag = 0x00

Identifying SA regions ...

Reg#  Reg size    Reg loc
----------------------------
0x00  0x0001A10C  0x00000000
0x01  0x0001A10C  0x00036696

Verifying ROYL modules ...

 ID          Size (bytes)         Address    Checksum
dir   hdr    dir       hdr
-----------------------------------------------------
000A  OK     0000003E  00000200   0002FFB2   00000000  OK
000B  OK     000000D1  00000200   0002FEE1   00000000  OK
0030  OK     00000400  OK         0002FAE1   00000000  OK
0047  OK     00000400  OK         0002F320   00000000  OK
000D  OK     00000084  00000200   0002F29C   00000000  OK
004F  OK     000000E0  00000200   0002F720   00000000  OK

dir  -  Module ID/Size as reported in directory module (0x20B or 0x0B)
hdr  -  Module ID/Size as reported in module's header
N/A  -  Not Applicable
BAD  -  Module has invalid checksum. This may be due to non-existent module.

ROM modules saved to Flash_00\000Bmods and Flash_00\020Bmods

Active directory is 0x0B -- directory 0x20B not present

Analysing active 0x0A module ...

Head map checksum (Expected / Actual) = 0x0000 / 0x0000 - OK
Number of heads (physical / in use) = 2/2
Head map #1 = 0x03 / 0b00000011
Head map #2 = 0x03 / 0b00000011

DCM = | Z | 8 K 7 U W D B 
      : : : : : : : : : :
      : : : : : : : : : unknown
      : : : : : : : : top VCM
      : : : : : : : ACA
      : : : : : : bottom VCM
      : : : : : HSA
      : : : : media
      : : : preamp
      : : latch
      : base
      spindle motor

Analysing active 0x0D module ...

Firmware Version = 01.03E01
World Wide Name = 50014EE102F4F1EC
Model Number =                                         
Serial Number =                     


Analysing active 0x4F module ...

ROM version = 000500F9

Analysing active 0x47 module ...

Preamp values
-----------
0  0509930C
1  08079109
2  550AA000
3  550AA000
4  550AA000
5  550AA000
6  550AA000
7  550AA000

Microjogs
-------
0  0992
1  095C
2  0A0A
3  0A0A
4  0A0A
5  0A0A
6  0A0A
7  0A0A

Head/Media DCM = 7K
