Analysing ROM.bin ...

Searching for LDSCs and verifying PCMBlocks ...

LDSC   LDSC    Att   PCMBlock          RAM         size      PCMBlk CS
Start  ID CS        Start -  End     address     RAM / ROM    Exp/Act
---------------------------------------------------------------------------
    0  5A 40   04     140 -  1ED7      4B688     1D94  1D94   000BAF4E unknown CRC
   20  01 11   11    1ED8 -  5F7C   30080000 c   5500  40A4    69   69   OK
   40  02 58   0C    5F7D -  6345   24000000      3C8   3C8    05   05   OK
   60  03 01   40    6346 -  BFAA   FFE00200     5C64  5C64    19   19   OK
   80  04 31   01    BFAB - 120F3          0 c   7C40  6148    3F   3F   OK
   A0  05 9E   01   120F4 - 12518       DFB0 c    4EC   424    F3   F3   OK
   C0  06 94   03   12519 - 14AA5      402E0 c   3020  258C    36   36   OK
   E0  07 ED   03   14AA6 - 14E7E   602B3400 c    9C0   3D8    D5   D5   OK
  100  08 BE   01   14E7F - 2BBC7   383A4A00 c  1EA20 16D48    9A   9A   OK
  120  09 17   01   2BBC8 - 4E474   38008230 c  2F444 228AC    E6   EA   BAD

LDSC   = PM Loader Config String (32 bytes)
ID     = ID byte of LDSC (byte #0)
CS     = Checksum byte or word
Att    = Attributes
PCMBlk = Program Code Memory Block
Exp    = Expected checksum for PCMBLock
Act    = Actual checksum for PCMBLock
c      = compressed PCMBlock
size   = size of decompressed (in RAM) and compressed (in ROM) PCMBlock in bytes


ROYL directory module 0x000B found at 0x7F19A

Active directory flag = 0x01

Identifying SA regions ...

Reg#  Reg size    Reg loc
----------------------------
0x00  0x0006352E  0x00000000
0x01  0x0006352E  0x000C8A00
0x02  0x0006352E  0x00191400
0x03  0x00000000  0x00000000
0x04  0x00000000  0x00000000
0x05  0x00000000  0x00000000
0x06  0x00000000  0x00000000
0x07  0x00000000  0x00000000
0x08  0x00000000  0x00000000
0x09  0x00000000  0x00000000

Verifying ROYL modules ...

 ID          Size (bytes)         Address    Checksum
dir   hdr    dir       hdr
-----------------------------------------------------
0001  N/A    00008000  N/A        00000000             N/A
000A  OK     0000004E  00000200   0007E000   00000000  OK
000B  OK     00000129  00000200   0007F19A   00000000  OK
020B  OK     00000129  00000200   0007D19A   00000000  OK
0030  OK     00000400  OK         0007B000   00000000  OK
0047  FFFF   00000B18  01FFFE00   0007E682   FFFFFD3A  BAD
000D  OK     00000108  00000200   0007E04E   00000000  OK
004F  OK     0000052C  00000600   0007E156   00000000  OK
0181  OK     00000C00  OK         0007B400   00000000  OK

ROYL directory module 0x020B found at 0x7D19A

Active directory flag = 0x02

Identifying SA regions ...

Reg#  Reg size    Reg loc
----------------------------
0x00  0x000C6A5C  0x00000000
0x01  0x000C6A5C  0x000C8A00

Verifying ROYL modules ...

 ID          Size (bytes)         Address    Checksum
dir   hdr    dir       hdr
-----------------------------------------------------
0001  N/A    00008000  N/A        000C591D             N/A
000A  OK     0000004E  00000200   0007C000   00000000  OK
000B  OK     00000129  00000200   0007F19A   00000000  OK
020B  OK     00000129  00000200   0007D19A   00000000  OK
0181  OK     00000C00  OK         0007B400   00000000  OK
0030  OK     00000400  OK         0007B000   00000000  OK
0047  OK     00000B18  00180000   0007C682   00000000  OK
000D  OK     00000108  00000200   0007C04E   00000000  OK
004F  OK     0000052C  00000600   0007C156   00000000  OK

dir  -  Module ID/Size as reported in directory module (0x20B or 0x0B)
hdr  -  Module ID/Size as reported in module's header
N/A  -  Not Applicable
BAD  -  Module has invalid checksum. This may be due to non-existent module.

ROM modules saved to Flash_00\000Bmods and Flash_00\020Bmods

Active directory is 0x20B

Analysing active 0x0A module ...

Head map checksum (Expected / Actual) = 0x0000 / 0x0000 - OK
Number of heads (physical / in use) = 10/9
Head map #1 = 0x03EF / 0b0000001111101111
Head map #2 = 0x03FF / 0b0000001111111111

DCM = | W | M J 3 D H 2 C 
      : : : : : : : : : :
      : : : : : : : : : unknown
      : : : : : : : : top VCM
      : : : : : : : ACA
      : : : : : : bottom VCM
      : : : : : HSA
      : : : : media
      : : : preamp
      : : latch
      : base
      spindle motor

Analysing active 0x0D module ...

Firmware Version = 01.01A01
World Wide Name = 50014EE059C260F5
Model Number = WDC WD30NMZW-11GX6S1                    
Serial Number =                     


Analysing active 0x4F module ...

ROM version = 00020014

Analysing active 0x47 module ...

Preamp values
-----------
0  01300681
1  0132067E
2  012C0681
3  012A0681
4  0130057A
5  0132067A
6  01300781
7  01320681
8  012E0681
9  02300570

Microjogs
-------
0  0000
1  0000
2  0000
3  0000
4  0000
5  0000
6  0000
7  0000
8  0000
9  0000

Head/Media DCM = 3J
