*******************************************************************************
HDAT2 v4.5.3 (c) 2007 CBL Drive/File Level 16.11.2013 01:34:28
Params: 

Detect DASD devices...

HDD: 2/2/2/2
FDD: 1/1

BIOS supports...

+ Advanced Power Management (APM) ver. 1.2
+ PCI BIOS ver. 2.10
+ System Management BIOS (SMBIOS) ver. 2.31
+ Desktop Management Interface (DMI) ver. 0.0
+ PnP BIOS ver. 1.0
+ PCI Interrupt Routing rev. 1.0

BIOS detect...

Vendor  : IBM
Version : 2DKT13AUS
Date    : 11/23/2005
ROM Size: 512 KB

Board detect...

Manufacturer : IBM
Product Name : IBM
Version      : 
Serial Number: 

CPU/RAM/BUS detect...

CPU vendor    : Intel [GenuineIntel] 
CPU name      : Intel(R) Celeron(R) CPU 2.66GHz
CPU cores     : Hyper-Threading [Physical=1]
CPUID standard: F/M/S/ID = 15:0/4:0/1/0 [00000F41h], max. levels = 5
CPUID extended: F/M/S/ID = 0:0/0:0/0/0 [00000000h], max. levels = 8
RAM: 1015.44 MB
BUS: PCI 

CMOS check...

CMOS battery power     : 80h -> O.K.
POST diagnostics status: 00h -> O.K.
Shutdown/Reset status  : 00h
   -> Power-on or Soft reset

ROM scan...

1. ROM address C000:0000h, Size = 40 KB
PCI header:
  Vendor ID : 8086h   -> Intel Corporation
  Device ID : 2572h
  Class Code: 00h/00h/03h   -> Unknown/Undefined

2. ROM address E000:0000h, Size = 64 KB
ROM does not contain valid PCI header.

Detect floppy drives...

CMOS detected 1 Floppy Drive(s).
BIOS detected 1 Floppy drive(s).
Checked 0 floppy drive(s).

PCI scan...

1. BaseClass: Storage, SubClass: IDE
BaseClass = 01h, SubClass = 01h, Programming Interface = 8Ah
Bus = 0, Device = 31, Function = 1, Header Type = 00h
Host: Vendor ID = 8086h, Device ID = 24DBh, Revision = 02h
Vendor Name: Intel Corporation
Address 4: I/O Port = 00001810h
Primary   channel: I/O Port 01F0h, IRQ 14 (compatibility mode)
   -> Drive 0/1: Base Clock = 33/33 MHz, Cable = 40/40 conductor
Secondary channel: I/O Port 0170h, IRQ 15 (compatibility mode)
   -> Drive 0/1: Base Clock = 33/33 MHz, Cable = 40/40 conductor
Bus Master: supported and enabled
Bus Master Control Register: 1810h
Built-In Self Test: not supported

PCI devices...

[0/0 01F0h/03F6h/0Eh] WDC WD.0.BB-.0JHC0
[0/1 01F0h/03F6h/0Eh] disabled or not present
[1/0 0170h/0376h/0Fh] HL-DT-ST  GCR-8240N
[1/1 0170h/0376h/0Fh] disabled or not present

Detect on-board ATA/ATAPI devices...

[4/0 01E8h/03EEh/00h] disabled or not present
[4/1 01E8h/03EEh/00h] disabled or not present
[5/0 0168h/036Eh/00h] disabled or not present
[5/1 0168h/036Eh/00h] disabled or not present
[6/0 0100h/0306h/00h] disabled or not present
[6/1 0100h/0306h/00h] disabled or not present

Detect ASPI Drives...

Host Adapter Number    : 0
Host Adapter Identifier: USB Mass Storage
Host Adapter SCSI ID   : 7
ASPI SCSI Manager ID   : ASPI for DOS/USB

No devices found


Detect Ext.INT13h devices...

BIOS 80h: ATA -> already detected
BIOS 81h: USB -> Detection not possible, yet
uknown device

Detect OS...

Detected OS DOS, version 7.10 Microsoft
DOS is in HMA
Memory management: DPMI (CWSDPMI or a Windows DOS box)
