MultiDrive – free backup, clone & wipe disk utility from Atola Technology

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 3
  [ 42 posts ]  Go to page 1, 2, 3  Next
  Previous topic | Next topic 
Author Message
joeman032000
 Post subject: Looking for a hard drive board for a WD
PostPosted: April 15th, 2007, 21:02 
Offline

Joined: April 15th, 2007, 21:00
Posts: 7
I am looking for a HD circuit board for a Western Digital 80GB hard drive. The modle number on the board is #2060-001292-000 REV A. I need this EXACT board. It is a Western Digital Caviar 80 GB. NOT a caviar SE. Plese let me know Thanks.

more info:

Date: 09 SEP 2004
DCM - DSCHYAJAH
WD P/N WD800JB-00JJA0
Top
 Profile  
 
joeman032000
 Post subject:
PostPosted: April 16th, 2007, 20:08 
Offline

Joined: April 15th, 2007, 21:00
Posts: 7
bump
Top
 Profile  
 
Mikippp
 Post subject:
PostPosted: April 17th, 2007, 3:41 
Offline

Joined: May 30th, 2005, 17:07
Posts: 542
Hi,
You can use any 2060-001292-xxx logic board.
It is nacessary to resolder native ROM !!!
Mikippp
Top
 Profile  
 
joeman032000
 Post subject:
PostPosted: April 17th, 2007, 16:27 
Offline

Joined: April 15th, 2007, 21:00
Posts: 7
ok well how/what is soldering native rom? im kinda new at this.....
Top
 Profile  
 
pcimage
 Post subject:
PostPosted: April 17th, 2007, 18:15 
Offline

Joined: November 29th, 2006, 10:08
Posts: 7864
Location: UK
The little 8-pin ROM chip, unsolder from duff board, and resolder to donor board.
Top
 Profile  
 
joeman032000
 Post subject:
PostPosted: April 20th, 2007, 16:09 
Offline

Joined: April 15th, 2007, 21:00
Posts: 7
any more details or pictuers?
Top
 Profile  
 
rameez
 Post subject:
PostPosted: April 21st, 2007, 3:42 
Offline

Joined: June 27th, 2006, 11:33
Posts: 2288
Location: In ur HDD !
The picture shows ROM chip and unsoldering it :

Image
Image
Top
 Profile  
 
hddguy
 Post subject:
PostPosted: April 22nd, 2007, 7:33 
Offline

Joined: November 9th, 2006, 15:15
Posts: 2984
just buy a donor off ebay with the same model number (WD800....) and there you have a PCB suitable for ROM swap.
Top
 Profile  
 
Shortscurcuits
 Post subject:
PostPosted: April 22nd, 2007, 8:54 
Offline

Joined: November 15th, 2005, 11:05
Posts: 189
Location: Canada
Same model & DCM code = no soldering required. Donor usually manufactured within 2-3 weeks of the drive needing repair.

_________________
I think ST is a sub company of Lucas
Top
 Profile  
 
joeman032000
 Post subject:
PostPosted: April 25th, 2007, 17:37 
Offline

Joined: April 15th, 2007, 21:00
Posts: 7
finding a donor is near impossible... i cant find em anywhere
Top
 Profile  
 
Shortscurcuits
 Post subject:
PostPosted: April 26th, 2007, 20:43 
Offline

Joined: November 15th, 2005, 11:05
Posts: 189
Location: Canada
Joeman take a look on E-bay there are 2 WD800JB-00JJA0 for sale as of yesterday and about 47 auctions for WD800JB. Most are new but are selling for around $40.00 US.

_________________
I think ST is a sub company of Lucas
Top
 Profile  
 
Shortscurcuits
 Post subject:
PostPosted: April 27th, 2007, 21:17 
Offline

Joined: November 15th, 2005, 11:05
Posts: 189
Location: Canada
Joeman try to contact this seller, his name is Mike. There's a very good chance he can get you the exact pcb if you are unsure of rom soldering. http://search.ebay.com/_W0QQsassZsoftcom

tried to send PM but don't think it worked

Hope this is helpful, Andy.

_________________
I think ST is a sub company of Lucas
Top
 Profile  
 
hddking
 Post subject:
PostPosted: April 29th, 2007, 15:22 
Offline

Joined: April 27th, 2007, 4:07
Posts: 32
hello friends..
i can help u if u needed any pcb ic or pcb
just pm me your email address to contact u..
Top
 Profile  
 
sepangnet
 Post subject: We sell hardisk PCB Board
PostPosted: April 30th, 2007, 23:23 
Offline

Joined: April 30th, 2007, 14:37
Posts: 9
Location: Malaysia
visit http://www.sepangnet.com
email sales@sepangnet.com
Top
 Profile  
 
hddking
 Post subject:
PostPosted: May 1st, 2007, 4:42 
Offline

Joined: April 27th, 2007, 4:07
Posts: 32
one of my friend contact with this site and person
--------------------------------------------------------------------------------

visit http://www.sepangnet.com
email sales@sepangnet.com

he dont have any office in malaysia and he is simple agent this PERSON just waisting other time .. this person is not reliable..

this person dont have any pcb he want money in advance and will give u nothing just waiting and waisting other time and money..

PLS DONT CONTACT WITH THAT PERSON MY FRIENDLY ADVICE TO U ALL
:)
Top
 Profile  
 
joeman032000
 Post subject:
PostPosted: May 1st, 2007, 20:11 
Offline

Joined: April 15th, 2007, 21:00
Posts: 7
Shortscurcuits wrote:
Joeman try to contact this seller, his name is Mike. There's a very good chance he can get you the exact pcb if you are unsure of rom soldering. http://search.ebay.com/_W0QQsassZsoftcom

tried to send PM but don't think it worked

Hope this is helpful, Andy.



thanks ill try that, i had found another guy but lost contact with him....

Shortscurcuits wrote:
Joeman take a look on E-bay there are 2 WD800JB-00JJA0 for sale as of yesterday and about 47 auctions for WD800JB. Most are new but are selling for around $40.00 US.


I looked but found none that matched my board...


hddking wrote:
hello friends..
i can help u if u needed any pcb ic or pcb
just pm me your email address to contact u..



and for you just e-mail me at scouty032000@yahoo.com
Top
 Profile  
 
joeman032000
 Post subject:
PostPosted: May 13th, 2007, 13:48 
Offline

Joined: April 15th, 2007, 21:00
Posts: 7
bump
Top
 Profile  
 
NeGrusti
 Post subject:
PostPosted: May 25th, 2007, 9:14 
Offline

Joined: May 21st, 2005, 14:32
Posts: 5
Location: Phuket, Thailand
Have you found the board?
We have this one in stock (Thailand).
contact through PM or website if necessary
Top
 Profile  
 
salvationlaura
 Post subject:
PostPosted: May 28th, 2007, 2:42 
Offline
User avatar

Joined: January 26th, 2007, 22:49
Posts: 291
Location: Earth
We offer 10 CHIPs in the HDDWD to solve this problem.

_________________
SalvationDATA--Profesionnal Hard drive solution Provider. MSN: sales.laura@salvationdata.com
Top
 Profile  
 
prismakhas
 Post subject: Re:
PostPosted: January 21st, 2008, 2:20 
hddking wrote:
one of my friend contact with this site and person
--------------------------------------------------------------------------------

visit http://www.sepangnet.com
email sales@sepangnet.com

he dont have any office in malaysia and he is simple agent this PERSON just waisting other time .. this person is not reliable..

this person dont have any pcb he want money in advance and will give u nothing just waiting and waisting other time and money..

PLS DONT CONTACT WITH THAT PERSON MY FRIENDLY ADVICE TO U ALL
:)


Who are you anyway?

He does have an office in Sepang, Selangor. Malaysia.

SepangNet is our reseller for AceLabs products.

Since you accused their company, please bring the evidence. You can make a police report if it is true.

Regards,

Syed Aswadi
Prisma Khas Sdn Bhd
Top
  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 3
  [ 42 posts ]  Go to page 1, 2, 3  Next

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: Google [Bot] and 56 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group