MultiDrive – free backup, clone & wipe disk utility from Atola Technology

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Switch to mobile style


Post new topic Reply to topic  Page 1 of 1
  [ 15 posts ] 
  Previous topic | Next topic 
Author Message
zebong
 Post subject: MARVEL FAMILY PCB BURN
PostPosted: April 17th, 2009, 10:56 
Offline
User avatar

Joined: December 24th, 2007, 16:08
Posts: 1421
Location: EUROPE
Hi to all HDDGURUS,

I have a WD that the PCB is burned, and dont have same exact macthing number.

Attachment:
MARVEL-BURN.jpg
MARVEL-BURN.jpg [ 119.17 KiB | Viewed 9993 times ]


What can i do here ?

Thanks
ZeBong

_________________
ZeBong
" что случилось в России - останется в России "
" Россия еще раз"
Top
 Profile  
 
drc
 Post subject: Re: MARVEL FAMILY PCB BURN
PostPosted: April 17th, 2009, 11:05 
Offline

Joined: August 12th, 2008, 13:11
Posts: 3235
Location: USA
What's the number on that one? Can't see it on your photo. Also that part may just be a TVS?

_________________
You don't have to backup all of your files, just the ones you want to keep.
Top
 Profile  
 
zebong
 Post subject: Re: MARVEL FAMILY PCB BURN
PostPosted: April 17th, 2009, 11:06 
Offline
User avatar

Joined: December 24th, 2007, 16:08
Posts: 1421
Location: EUROPE
PCB NUMBER
2061-701552-G00 10P XT 5009 2326 6 0001440 8 441

_________________
ZeBong
" что случилось в России - останется в России "
" Россия еще раз"
Top
 Profile  
 
Mikippp
 Post subject: Re: MARVEL FAMILY PCB BURN
PostPosted: April 17th, 2009, 11:12 
Offline

Joined: May 30th, 2005, 17:07
Posts: 542
Hi,
U can remove/replace Transil D3 (SMAJ5.0A), and replace resistor R67...

Regards,
Top
 Profile  
 
ccc
 Post subject: Re: MARVEL FAMILY PCB BURN
PostPosted: April 17th, 2009, 11:12 
Offline
User avatar

Joined: January 9th, 2007, 11:12
Posts: 410
Location: Romania
90% that's a TVS....remove it and power on..
Rgds

_________________
www.datasave.ro
Top
 Profile  
 
N.C.
 Post subject: Re: MARVEL FAMILY PCB BURN
PostPosted: April 17th, 2009, 13:59 
Offline
User avatar

Joined: March 28th, 2008, 7:52
Posts: 1466
Location: Europe, Hungary
The marked part is a TVS.
Remove it, and poweron alone (without the HDA) and use a FUSE in the 5V circuit.

If you are lucky the marvell mcu still good. 8)

Janos
Top
 Profile  
 
unknown
 Post subject: Re: MARVEL FAMILY PCB BURN
PostPosted: April 18th, 2009, 22:40 
Offline

Joined: October 21st, 2007, 8:48
Posts: 1712
I think you should replace it ( not remove it ) for your safety

you don't know what will happen again

maybe if you remove it and power on directly that will burn MCU


Good luck
Top
 Profile  
 
N.C.
 Post subject: Re: MARVEL FAMILY PCB BURN
PostPosted: April 19th, 2009, 16:30 
Offline
User avatar

Joined: March 28th, 2008, 7:52
Posts: 1466
Location: Europe, Hungary
This is why i sad, use a FUSE in the 5V line....
The TVS is only for transient filtering and overvoltage protection.
Generally it is safe to remove, but not for long use again!

Janos
Top
 Profile  
 
zebong
 Post subject: Re: MARVEL FAMILY PCB BURN
PostPosted: April 20th, 2009, 10:46 
Offline
User avatar

Joined: December 24th, 2007, 16:08
Posts: 1421
Location: EUROPE
Hi,

Thanks to all,

I have remove the TVS and just connect the PCB and always BSY, can not also enter in safe mode.

i will try to look for a PCB donor

Anyone have this PCB

2061-701552-G00 10P
XT 5U09 2326 6 0001440 8 441

zEbONG

_________________
ZeBong
" что случилось в России - останется в России "
" Россия еще раз"
Top
 Profile  
 
Creator
 Post subject: Re: MARVEL FAMILY PCB BURN
PostPosted: April 20th, 2009, 14:58 
Offline

Joined: December 12th, 2008, 17:00
Posts: 181
Location: Cook islands
No no no Zebong!
You don't need same PCB
The donor PCB should match:
xxxx-701552-xxx xxx
xx xxxx xxxx x xxxxxxx x xxx

Only those 6 symbols are important for matching.

This is ABSOLUTELY EXACT information, you MUST know it, otherwise how are you still working in data Recovery???


P.S.
I've done some researches on WD and solved ABRT problem, when you have no access to userdata, but SA looks fine... :D

_________________
This user was found to be affiliated with Ace Lab/PC-3000. See this topic for details.
Top
 Profile  
 
zebong
 Post subject: Re: MARVEL FAMILY PCB BURN
PostPosted: April 21st, 2009, 7:47 
Offline
User avatar

Joined: December 24th, 2007, 16:08
Posts: 1421
Location: EUROPE
Creator wrote:
I've done some researches on WD and solved ABRT problem, when you have no access to userdata, but SA looks fine... :D [/color]



That´s great :)

_________________
ZeBong
" что случилось в России - останется в России "
" Россия еще раз"
Top
 Profile  
 
zebong
 Post subject: Re: MARVEL FAMILY PCB BURN
PostPosted: April 29th, 2009, 17:25 
Offline
User avatar

Joined: December 24th, 2007, 16:08
Posts: 1421
Location: EUROPE
Creator wrote:
No no no Zebong!
You don't need same PCB
The donor PCB should match:
xxxx-701552-xxx xxx
xx xxxx xxxx x xxxxxxx x xxx

Only those 6 symbols are important for matching.

This is ABSOLUTELY EXACT information, you MUST know it, otherwise how are you still working in data Recovery???



Hi Creator,

This works in all WD disk ? or just for the marvel ?
I try this is Cyl 16 did not work :(

Thanks
ZeBong

_________________
ZeBong
" что случилось в России - останется в России "
" Россия еще раз"
Top
 Profile  
 
Doomer
 Post subject: Re: MARVEL FAMILY PCB BURN
PostPosted: April 29th, 2009, 22:04 
Offline
User avatar

Joined: September 29th, 2005, 12:02
Posts: 3577
Location: Chicago
some old WD drive had this info messed up, so it might not work on old WD drives. But on old WD drives it is easy to ID the PCB by looking on layout

_________________
SAN, NAS, RAID, Server, and HDD Data Recovery.


Last edited by Doomer on April 29th, 2009, 22:11, edited 1 time in total.

Top
 Profile  
 
Doomer
 Post subject: Re: MARVEL FAMILY PCB BURN
PostPosted: April 29th, 2009, 22:08 
Offline
User avatar

Joined: September 29th, 2005, 12:02
Posts: 3577
Location: Chicago
Creator wrote:
I've done some researches on WD and solved ABRT problem, when you have no access to userdata, but SA looks fine... :D

I wondering did somebody on this forum researched something before us :(
Sorry for these emotions

_________________
SAN, NAS, RAID, Server, and HDD Data Recovery.
Top
 Profile  
 
zebong
 Post subject: Re: MARVEL FAMILY PCB BURN
PostPosted: April 30th, 2009, 6:36 
Offline
User avatar

Joined: December 24th, 2007, 16:08
Posts: 1421
Location: EUROPE
For old ones did not work, but i found a solution.

_________________
ZeBong
" что случилось в России - останется в России "
" Россия еще раз"
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 15 posts ] 

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 45 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group