MultiDrive – free backup, clone & wipe disk utility from Atola Technology

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Switch to mobile style


Post new topic Reply to topic  Page 1 of 1
  [ 10 posts ] 
  Previous topic | Next topic 
Author Message
ddd123
 Post subject: Barracuda ES.2 firmware issue
PostPosted: September 18th, 2009, 5:15 
Offline

Joined: March 2nd, 2006, 11:14
Posts: 169
can anybody how to access terminal on LED CC blocked disk

it's different recovery by ES.2 than 7200.11?

CTRL-Z is not working on dismounted PCB

Thanks
Top
 Profile  
 
CK
 Post subject: Re: Barracuda ES.2 firmware issue
PostPosted: September 18th, 2009, 5:42 
Offline

Joined: March 13th, 2005, 12:33
Posts: 872
Location: Dublin
short circuit read channel..

_________________
Data Recovery Ireland
Top
 Profile  
 
ddd123
 Post subject: Re: Barracuda ES.2 firmware issue
PostPosted: September 18th, 2009, 5:57 
Offline

Joined: March 2nd, 2006, 11:14
Posts: 169
It's on all Barracuda ES.2

we have 3x 250GB
Top
 Profile  
 
helpdisc
 Post subject: Re: Barracuda ES.2 firmware issue
PostPosted: September 18th, 2009, 6:27 
Offline
User avatar

Joined: December 12th, 2005, 3:32
Posts: 709
Location: Belgrade
shor circuit did not work for us

_________________
HddSurgery - Professional Data Recovery Tools
Top
 Profile  
 
CK
 Post subject: Re: Barracuda ES.2 firmware issue
PostPosted: September 18th, 2009, 6:28 
Offline

Joined: March 13th, 2005, 12:33
Posts: 872
Location: Dublin
it worked for me on 1 drive, had one this week which took some extra work. Have not been able to do one with UDMA though..

_________________
Data Recovery Ireland
Top
 Profile  
 
ddd123
 Post subject: Re: Barracuda ES.2 firmware issue
PostPosted: September 18th, 2009, 7:19 
Offline

Joined: March 2nd, 2006, 11:14
Posts: 169
Can you tell where to shortcut it ????
Top
 Profile  
 
msurgeon
 Post subject: Re: Barracuda ES.2 firmware issue
PostPosted: September 18th, 2009, 9:29 
Offline

Joined: August 14th, 2008, 10:39
Posts: 257
Location: Morris Plains, New Jersey
This is the same as a 7200.11. Same repair procedure for both. It's been exhaustively documented on this site.
Top
 Profile  
 
rameez
 Post subject: Re: Barracuda ES.2 firmware issue
PostPosted: September 20th, 2009, 7:19 
Offline

Joined: June 27th, 2006, 11:33
Posts: 2288
Location: In ur HDD !
Post picture of pcb we will mark the position of points .
Top
 Profile  
 
ddd123
 Post subject: Re: Barracuda ES.2 firmware issue
PostPosted: September 20th, 2009, 8:27 
Offline

Joined: March 2nd, 2006, 11:14
Posts: 169
very similliar
URL http://www.angelapan.com/samples/pcb.jpg

Image
Top
 Profile  
 
hddguy
 Post subject: Re: Barracuda ES.2 firmware issue
PostPosted: September 21st, 2009, 9:25 
Offline

Joined: November 9th, 2006, 15:15
Posts: 2984
The Read channel needs to be shorted at the right moment, and PCB must NOT be detached. If successful the HDD may click several times then reach readiness and you can then proceed with repair.

mrsurgeon is right, it has been documented a lot in this forum, among other places also, you just simply need to find it.
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 10 posts ] 

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 47 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group