MultiDrive – free backup, clone & wipe disk utility from Atola Technology

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Switch to mobile style


Post new topic Reply to topic  Page 1 of 1
  [ 2 posts ] 
  Previous topic | Next topic 
Author Message
mingyue
 Post subject: Seagate 7200.11 firmware upgrade from HP24 to HP26
PostPosted: February 12th, 2010, 23:48 
Offline

Joined: February 10th, 2010, 4:24
Posts: 3
Location: Calgary
need to do an update for my seagate hard drive with HP24 firmware to HP26, downloaded new firmware HP26 from

http://h10025.www1.hp.com/ewfrf/wc/soft ... ct=3740339

followed the HP instruction and reboot the computer with the boot CD created for the firmware update, it always an error prompted says "can not find the drive". have created serveral CDs to reboot the computer but with the same result.

anyone had experience with updating the firmware... please share some insight on where i did wrong...

thanks
Top
 Profile  
 
fzabkar
 Post subject: Re: Seagate 7200.11 firmware upgrade from HP24 to HP26
PostPosted: February 15th, 2010, 10:28 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 16972
Location: Australia
Maybe the updater cannot see the SATA controller.

Try configuring your BIOS for IDE legacy or compatibility mode. This will make the SATA drive look like PATA.
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 2 posts ] 

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 63 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group