MultiDrive – free backup, clone & wipe disk utility from Atola Technology

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Switch to mobile style


Post new topic Reply to topic  Page 1 of 1
  [ 9 posts ] 
  Previous topic | Next topic 
Author Message
BGman
 Post subject: WD5000AAKS PCB
PostPosted: April 9th, 2010, 6:10 
Offline

Joined: September 30th, 2005, 7:33
Posts: 849
I have received several WD5000AAKS drives which PCB's doesn't match the HDA's. The previous owner apparently has tried PCB swap.
For the older WD drives the PCB serial number was written in a firmware module. Is it the same with the current models? If yes, which module I should look at?
Top
 Profile  
 
harddrivespecialist
 Post subject: Re: WD5000AAKS PCB
PostPosted: April 9th, 2010, 7:31 
Offline

Joined: January 15th, 2008, 11:06
Posts: 1419
Location: Providence, RI. Boston, MA USA
BGman wrote:
For the older WD drives the PCB serial number was written in a firmware module.

are you sure?
which model/s you have in mind?

_________________
www.datarecoveryne.com
Top
 Profile  
 
BGman
 Post subject: Re: WD5000AAKS PCB
PostPosted: April 9th, 2010, 7:45 
Offline

Joined: September 30th, 2005, 7:33
Posts: 849
harddrivespecialist wrote:
BGman wrote:
For the older WD drives the PCB serial number was written in a firmware module.

are you sure?
which model/s you have in mind?


Oops, it was with Maxtor drives. Sorry.
Top
 Profile  
 
unknown
 Post subject: Re: WD5000AAKS PCB
PostPosted: April 11th, 2010, 5:50 
Offline

Joined: October 21st, 2007, 8:48
Posts: 1712
Quote:
which module I should look at?

02

Quote:
PCB serial number was written in a firmware module

Sorry, I didn't read the sentence very well.
Top
 Profile  
 
networkpc3000
 Post subject: Re: WD5000AAKS PCB
PostPosted: April 11th, 2010, 19:44 
Offline
User avatar

Joined: December 16th, 2007, 10:26
Posts: 1151
maxtors??? WD5000AAKS???

_________________
data recovery service[/b]
Top
 Profile  
 
BGman
 Post subject: Re: WD5000AAKS PCB
PostPosted: April 13th, 2010, 4:41 
Offline

Joined: September 30th, 2005, 7:33
Posts: 849
Let's try another question.
Assuming I could read both Flash and SA modules.
Which module should match Flash content if the PCB is the original?
Top
 Profile  
 
harddrivespecialist
 Post subject: Re: WD5000AAKS PCB
PostPosted: April 13th, 2010, 7:18 
Offline

Joined: January 15th, 2008, 11:06
Posts: 1419
Location: Providence, RI. Boston, MA USA
Portions of many modules contains flash info.

_________________
www.datarecoveryne.com
Top
 Profile  
 
BGman
 Post subject: Re: WD5000AAKS PCB
PostPosted: April 13th, 2010, 8:02 
Offline

Joined: September 30th, 2005, 7:33
Posts: 849
harddrivespecialist wrote:
Portions of many modules contains flash info.

OK. Which portion of flash info is unique for each drive and which module contains this portion?
Top
 Profile  
 
drc
 Post subject: Re: WD5000AAKS PCB
PostPosted: April 13th, 2010, 9:19 
Offline

Joined: August 12th, 2008, 13:11
Posts: 3235
Location: USA
You don't have that many choices

_________________
You don't have to backup all of your files, just the ones you want to keep.
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 9 posts ] 

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 38 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group