View topic - My WD hard disk appears as a Samsung after passing LLF

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Switch to mobile style

My WD hard disk appears as a Samsung after passing LLF

Page 1 of 1

[ 2 posts ]

Previous topic | Next topic

Author

Message

Marcel

Post subject: My WD hard disk appears as a Samsung after passing LLF

Posted: July 6th, 2010, 13:45

Joined: July 5th, 2010, 19:19
Posts: 1
Location: University of Information Science, Habana, Cuba

I have a Western Digital Blue Scorpio WD2500BEVT-00ZCT0 2.5" SATA and I have it installed in an external enclosure. By a mistake I pass a low-level format with the HDD-Low-Level-Format-Tool and now my WD appears as a Samsung hard disk. I tried to pass WD Data Lifeguard Diagnostic for Windows as described in this post but after 5 hours my WD still shows as Samsung.
If someone could give me advice or recommend a tool that could correct it I would greatly appreciate this.

PD: Sorry by my English

Top

unknown

Post subject: Re: My WD hard disk appears as a Samsung after passing LLF

Posted: July 8th, 2010, 3:24

Joined: October 21st, 2007, 8:48
Posts: 1712

Quote:

now my WD appears as a Samsung hard disk

It's can not be.

I think that your WD has internal failure (heads, SA, PCB,,, etc). The fact that the drive enclosure is (Samsung). Is it right ?

Top

Page 1 of 1

[ 2 posts ]

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: Google [Bot] and 98 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum