View topic - Seagate st3160316cs Rst 0x08M

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Switch to mobile style

Seagate st3160316cs Rst 0x08M

Page 1 of 1

[ 18 posts ]

Previous topic | Next topic

Author

Message

grigoreee

Post subject: Seagate st3160316cs Rst 0x08M

Posted: July 12th, 2011, 21:19

Joined: September 17th, 2010, 18:53
Posts: 35
Location: unknown

I have this problem Rst 0x08M on terminal ctrl+z does not work hdd is not detected by bios
The data is not important i want the hdd... if is possible

Top

pcimage

Post subject: Re: Seagate st3160316cs Rst 0x08M

Posted: July 13th, 2011, 2:44

Joined: November 29th, 2006, 10:08
Posts: 7864
Location: UK

"Rst 0x08M" is normal

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!

Top

labtech

Post subject: Re: Seagate st3160316cs Rst 0x08M

Posted: July 13th, 2011, 11:31

Joined: August 18th, 2010, 17:35
Posts: 3669
Location: Massachusetts, USA

are you sure terminal set up is correct?

_________________
Hard Disk Drive (HDD), Solid State Drive (SSD, SATA, NVMe, etc), USB Flash Drive and RAID Data Recovery Specialist in Massachusetts

Top

hddguy

Post subject: Re: Seagate st3160316cs Rst 0x08M

Posted: July 13th, 2011, 11:38

Joined: November 9th, 2006, 15:15
Posts: 2984

labtech wrote:

are you sure terminal set up is correct?

If setup was wrong 'Rst 0x80' message will not appear

Top

labtech

Post subject: Re: Seagate st3160316cs Rst 0x08M

Posted: July 13th, 2011, 12:16

Joined: August 18th, 2010, 17:35
Posts: 3669
Location: Massachusetts, USA

I while ago, I rigged together a RS232 adapter with wires for Rx Tx. I did not do a good job with the cables on it. As result, I was able to receive signal in terminal, but could not transmit anything.

Was thinking OP may have the same problem.

_________________
Hard Disk Drive (HDD), Solid State Drive (SSD, SATA, NVMe, etc), USB Flash Drive and RAID Data Recovery Specialist in Massachusetts

Top

grigoreee

Post subject: Re: Seagate st3160316cs Rst 0x08M

Posted: July 13th, 2011, 14:37

Joined: September 17th, 2010, 18:53
Posts: 35
Location: unknown

tx cable problem
now

Rst 0x08M
ASCII Diag mode

F3 T>
LED:000000CD FAddr:000068DB
LED:000000CD FAddr:000068DB
LED:000000CD FAddr:000068DB
LED:000000CD FAddr:000068DB

no commands are accepted

Top

grigoreee

Post subject: Re: Seagate st3160316cs Rst 0x08M

Posted: July 13th, 2011, 15:37

Joined: September 17th, 2010, 18:53
Posts: 35
Location: unknown

Hdd is busy all the time and not detected by bios

Top

labtech

Post subject: Re: Seagate st3160316cs Rst 0x08M

Posted: July 13th, 2011, 16:47

Joined: August 18th, 2010, 17:35
Posts: 3669
Location: Massachusetts, USA

I have not seen this model drive before.

It is an F3 Seagate drive, thus likely a firmware issue.

Since I have not worked on a drive like this before, I am unable to recommend a particular solution, but it is possible that one of the more popular solutions is applicable here.

Suggest you dig deeper, study more the issue and possible solutions by reading materials online, forums, manuals, books, whatever.

You can contact Seagate manufacturer and see if this model drive was affected by any firmware bugs. You will need the S/N ready.

Not sure what information you have available or how experienced you are...

_________________
Hard Disk Drive (HDD), Solid State Drive (SSD, SATA, NVMe, etc), USB Flash Drive and RAID Data Recovery Specialist in Massachusetts

Top

BlackST

Post subject: Re: Seagate st3160316cs Rst 0x08M

Posted: July 13th, 2011, 17:16

Joined: July 18th, 2006, 3:05
Posts: 7476
Location: ITALY

Analysis...analysis...ANALYSIS...

Top

grigoreee

Post subject: Re: Seagate st3160316cs Rst 0x08M

Posted: July 13th, 2011, 18:58

Joined: September 17th, 2010, 18:53
Posts: 35
Location: unknown

http://www.overclock.net/hard-drives-st ... -pics.html

Rst 0x08M
ASCII Diag mode
F3 T>/2
F3 2>Z
DiagError 00005014
F3 2>Z
HighPowerMode 0027
Spin Down Complete
Elapsed Time 0.083 msecs
F3 2>U
HighPowerMode 002F
ExecuteSpinRequest
Spin Up Complete
Elapsed Time 3.231 secs
F3 2>/1

F3 1>N1

Init SMART Fail
LED:000000CC FAddr:0024ECD9
LED:000000CC FAddr:0024ECD9

Rst 0x08M
ASCII Diag mode

F3 T>m0,2,2,0,0,0,0,22
Max Wr Retries = 00, Max Rd Retries = 00, Max ECC T-Level = 00, Max Certify Rewr
ite Retries = 0000

Init SMART Fail
LED:000000CC FAddr:0024ECD9
LED:000000CC FAddr:0024ECD9

Hdd is working and detected by bios but now i have internal cache error....

Top

labtech

Post subject: Re: Seagate st3160316cs Rst 0x08M

Posted: July 13th, 2011, 20:07

Joined: August 18th, 2010, 17:35
Posts: 3669
Location: Massachusetts, USA

Can you access LBAs? What tools are you using to access this drive?

_________________
Hard Disk Drive (HDD), Solid State Drive (SSD, SATA, NVMe, etc), USB Flash Drive and RAID Data Recovery Specialist in Massachusetts

Top

Doomer

Post subject: Re: Seagate st3160316cs Rst 0x08M

Posted: July 13th, 2011, 20:45

Joined: September 29th, 2005, 12:02
Posts: 3577
Location: Chicago

deleted

_________________
SAN, NAS, RAID, Server, and HDD Data Recovery.

Top

grigoreee

Post subject: Re: Seagate st3160316cs Rst 0x08M

Posted: July 13th, 2011, 23:52

Joined: September 17th, 2010, 18:53
Posts: 35
Location: unknown

labtech wrote:

Can you access LBAs? What tools are you using to access this drive?

Only TMOS. I don't have any special tools pc3000 etc...

Top

BlackST

Post subject: Re: Seagate st3160316cs Rst 0x08M

Posted: July 14th, 2011, 0:08

Joined: July 18th, 2006, 3:05
Posts: 7476
Location: ITALY

grigoreee wrote:

http://www.overclock.net/hard-drives-storage/457286-seagate-bricked-firmware-drive-fix-pics.html

Rst 0x08M
ASCII Diag mode
F3 T>/2
F3 2>Z
DiagError 00005014
F3 2>Z
HighPowerMode 0027
Spin Down Complete
Elapsed Time 0.083 msecs
F3 2>U
HighPowerMode 002F
ExecuteSpinRequest
Spin Up Complete
Elapsed Time 3.231 secs
F3 2>/1

F3 1>N1

Init SMART Fail
LED:000000CC FAddr:0024ECD9
LED:000000CC FAddr:0024ECD9

Rst 0x08M
ASCII Diag mode

F3 T>m0,2,2,0,0,0,0,22
Max Wr Retries = 00, Max Rd Retries = 00, Max ECC T-Level = 00, Max Certify Rewr
ite Retries = 0000

Init SMART Fail
LED:000000CC FAddr:0024ECD9
LED:000000CC FAddr:0024ECD9

Hdd is working and detected by bios but now i have internal cache error....

Then it is NOT working... :mrgreen:

Top

grigoreee

Post subject: Re: Seagate st3160316cs Rst 0x08M

Posted: July 14th, 2011, 1:40

Joined: September 17th, 2010, 18:53
Posts: 35
Location: unknown

The internal cache is the ram chip on the controller? (H5DU6462CTR)

Top

BlackST

Post subject: Re: Seagate st3160316cs Rst 0x08M

Posted: July 14th, 2011, 2:12

Joined: July 18th, 2006, 3:05
Posts: 7476
Location: ITALY

The problem was elsewhere, and you applied a random solution. That's all. If you really want to reuse the disk it takes more than just hyperterminal to make it work CORRECTLY again.

Top

grigoreee

Post subject: Re: Seagate st3160316cs Rst 0x08M

Posted: July 14th, 2011, 2:17

Joined: September 17th, 2010, 18:53
Posts: 35
Location: unknown

BlackST wrote:

The problem was elsewhere, and you applied a random solution. That's all. If you really want to reuse the disk it takes more than just hyperterminal to make it work CORRECTLY again.

Bad solidering on ram chip.... Now is working ...

Top

BlackST

Post subject: Re: Seagate st3160316cs Rst 0x08M

Posted: July 14th, 2011, 6:35

Joined: July 18th, 2006, 3:05
Posts: 7476
Location: ITALY

if it was the ram it didn't start at all neither was responsive on tml.

Top

Page 1 of 1

[ 18 posts ]

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: Google [Bot] and 67 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum