View topic - Help MK4025GAS PCB replace

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Switch to mobile style

Help MK4025GAS PCB replace

Page 1 of 1

[ 3 posts ]

Previous topic | Next topic

Author

Message

DinBan

Post subject: Help MK4025GAS PCB replace

Posted: August 5th, 2011, 7:27

Joined: August 5th, 2011, 7:13
Posts: 7
Location: Ukraine

Hi all, tell me please, there are two such drives 2,5 "HDD Toshiba MK4025GAS, first is working but have to many bad sectors, and the second not detected in the BIOS, also MHDD or Victoria can not see it, is the idea to change the electronics, and here are the questions - what i'm need to resolder that would change the PCB? only EEPROM IC12 or FLASH IC21 also resplace? thanx in advance to all! I will be happy with any substantive advice on this issue ....

Top

labtech

Post subject: Re: Help MK4025GAS PCB replace

Posted: August 5th, 2011, 7:41

Joined: August 18th, 2010, 17:35
Posts: 3669
Location: Massachusetts, USA

Is the non-working drive spinning?

_________________
Hard Disk Drive (HDD), Solid State Drive (SSD, SATA, NVMe, etc), USB Flash Drive and RAID Data Recovery Specialist in Massachusetts

Top

DinBan

Post subject: Re: Help MK4025GAS PCB replace

Posted: August 5th, 2011, 8:08

Joined: August 5th, 2011, 7:13
Posts: 7
Location: Ukraine

nop, silent

Top

Page 1 of 1

[ 3 posts ]

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 84 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum