View topic - Need some assistanse with dead FUJITSU MHY2160BH HDD

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Switch to mobile style

Need some assistanse with dead FUJITSU MHY2160BH HDD

Page 1 of 1

[ 8 posts ]

Previous topic | Next topic

Author

Message

erikfig

Post subject: Need some assistanse with dead FUJITSU MHY2160BH HDD

Posted: September 8th, 2011, 12:05

Joined: September 8th, 2011, 11:20
Posts: 10
Location: Virginia

Hello everyone!

I have a dead hdd FUJITSU MHY2160BH, CA06889-B377000T. The platters won't spin and I'm pretty sure the PCB is fried so I need some guidance to swap the PCB.

HDD Details are:
Serial ATA

Made in Thailand
Model: MHY2160BH
Part# CA06889-B377000T
SER: K428T7B281VA
160GB
Board # on PCB CA26344-B32104BA
Board Laber# VCP7YQ8L26
Date: 11/30/2007

My question is, does the PCB needs to have the same exact specs? I found this one online but the numbers are kind of different. Can I still use this PCB?

FUJITSU MHY2160BH, CA06889-B036 (Mine is B37)
Board # on PCB CA26344-B32104BA (The same as the defective one I have)
Board number on label: VCP7X6NLFC ( Different from mine)
DATE: 10-16-2007

My apology's if this is not the right place to ask for this.

I will appreciate any assistance on this....

Thanks!

Top

dmarques

Post subject: Re: Need some assistanse with dead FUJITSU MHY2160BH HDD

Posted: September 8th, 2011, 12:25

Joined: November 6th, 2006, 6:58
Posts: 1752

Hi,

You would be very lucky if after PCB swap you could access data.
One need to swap ROM also, if it's external.

Top

erikfig

Post subject: Re: Need some assistanse with dead FUJITSU MHY2160BH HDD

Posted: September 8th, 2011, 12:37

Joined: September 8th, 2011, 11:20
Posts: 10
Location: Virginia

dmarques wrote:

Hi,

You would be very lucky if after PCB swap you could access data.
One need to swap ROM also, if it's external.

Thank you for your response

It is a 2.5 laptop HDD. Do I still need to swap the ROM as well?

Top

dmarques

Post subject: Re: Need some assistanse with dead FUJITSU MHY2160BH HDD

Posted: September 8th, 2011, 12:46

Joined: November 6th, 2006, 6:58
Posts: 1752

I could only tell by checking the PCB.
Post a picture here.

Top

erikfig

Post subject: Re: Need some assistanse with dead FUJITSU MHY2160BH HDD

Posted: September 8th, 2011, 14:05

Joined: September 8th, 2011, 11:20
Posts: 10
Location: Virginia

dmarques wrote:

I could only tell by checking the PCB.
Post a picture here.

I'm currently at work but as soon I get home I post the picture for you.

Thanks!

Top

erikfig

Post subject: Re: Need some assistanse with dead FUJITSU MHY2160BH HDD

Posted: September 8th, 2011, 15:56

Joined: September 8th, 2011, 11:20
Posts: 10
Location: Virginia

dmarques wrote:

I could only tell by checking the PCB.
Post a picture here.

This is the HDD PCB. Thank you for your help!

Attachments:

photo.JPG [ 2.15 MiB | Viewed 5193 times ]

Top

dmarques

Post subject: Re: Need some assistanse with dead FUJITSU MHY2160BH HDD

Posted: September 8th, 2011, 16:29

Joined: November 6th, 2006, 6:58
Posts: 1752

Can you remove the gray cover and picture it again.

Top

erikfig

Post subject: Re: Need some assistanse with dead FUJITSU MHY2160BH HDD

Posted: September 8th, 2011, 18:10

Joined: September 8th, 2011, 11:20
Posts: 10
Location: Virginia

dmarques wrote:

Can you remove the gray cover and picture it again.

Sorry, will do later on.

Top

Page 1 of 1

[ 8 posts ]

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: Google [Bot] and 38 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum